KBC ESML3-FL2-D4-S2, ESML3-FL2-D4-M2 User Manual

Ethernet Switch

User Manual

ESML3-FL2-D4-S2

ESML3-FL2-D4-M2

Ethernet Switch User Manual

TABLE OF CONTENTS

1 OVERVIEW ............................................................... 3

1.1 I

NTRODUCTION

............................................................................................ 3

1.1.1 ESML3-FL2-D4 .................................................................................... 3

1.2 T

ECHNICAL SPECIFICATION

.............................................................................. 4

2 INSTALLATION .......................................................... 5

2.1 P

ACKAGE CONTENTS

...................................................................................... 5

2.2 C

ONFIGURATIONS

......................................................................................... 5

2.3 P

HYSICAL CONNECTIONS

................................................................................. 6

2.4 I

NSTALLATION METHOD

................................................................................... 7

2.4.1 DIN Rail Mount ................................................................................... 7

2.4.2 Wall-mount ........................................................................................ 7

2.5 E

THERNET

RJ45 C

ONNECTIONS

......................................................................... 8

2.6 F

IBER OPTIC CONNECTIONS

............................................................................. 8

2.7 D

ATA PORTS

............................................................................................... 9

2.8 G

ROUNDING / EARTHING

................................................................................. 9

2.9 LED S

TATUS

............................................................................................... 9

2.10 P

OWER INPUT TERMINALS

.............................................................................. 10

2.11 A

LARM RELAY OUTPUT

.................................................................................. 11

2.11.1 Single Power Supply Connected: ......................................................... 11

2.11.2 Dual Power Supplies Connected: ......................................................... 11

2.12 RS232 C

ONSOLE INTERFACE

.......................................................................... 12

3 TROUBLESHOOTING .................................................. 12

3.1 S

ELF-TESTING

........................................................................................... 12

3.2 T

WISTED PAIR PORT TESTING

......................................................................... 12

3.3 F

IBER PORT TESTING

................................................................................... 13

4 SYSTEM EXAMPLE ..................................................... 13

5 NETWORKING & CONFIGURATIONS ................................ 14

6 DIMENSIONS (MM) ..................................................... 15

7 WARRANTY ............................................................. 16

7.1 W

ARRANTY INFORMATION

.............................................................................. 16

7.2 C

LASS A

ITE ............................................................................................ 17

7.3 FCC ....................................................................................................... 17

8 INSTRUCTION OF DISASSEMBLY .................................... 17

Ethernet Switch User Manual

1 Overview

1.1 Introduction

This manual covers the ESML3-FL2-D4 series. The KBC ESML3-FL2-D4 products are high performance, managed, five port industrial Ethernet switches with an embedded four port serial data servers. They are designed for use in a wide range of operating temperatures in non-environmentally conditioned, industrial applications. Redundancy is offered through the DT-Ring technology that recovers cable or port failures automatically in less than 50ms. The unit has redundant power supply terminals and an alarm output for power supply and uplink port failure.

1.1.1 ESML3-FL2-D4

The ESML3-FL2-D4 is a five port managed switch which provides three, 10/100 twisted pair copper ports, two uplink, full-duplex, multimode or singlemode 100Mbps fiber ports. Each copper port supports a self-adaptive function allowing it to be configured to 10Base-T or 100Base-TX, full or half-duplex operation mode, supporting automatic MDI/MDI-X connection. The two fiber ports can be used to make up a ring network with a recovery time of less than 50ms. The embedded server has four serial data ports that can be individually configured to work with RS232 or RS485 protocols. The switch is available as either a DIN rail or wall-mount configuration.

Ethernet Switch User Manual

1.2 Technical Specification

ESML3-FL2-D4

Switching

Mode Store-and-forward Switching rate 148810pps Max filtering rate 148810pps System switching bandwidth 5.6Gbps MAC address table 8k

Ports

Serial Data

Physical Port 3.81 phoenix wiring terminal Error rate of data transmission 0

Electrical characteristic

In line with 3 wires RS232 & 2 wires

RS485 Software flow control XON/XOFF, default: no flow control Serial baud rate 50-230.4kbps, default: 9.6kps Data bit 5,6,7,8 default: 8 bit

Check bit

None, Even, Odd, Space, Mark, default:

None Stop bit 1,1.5,2 default: 1 Embedded gateway of serial port

Supports

ARP, TCP/IP, UDP, ICMP, BOOTP, DHCP,

SNTP, TFTP, Telnet, HTTP, SSL, SSH

1.0/2.0, SNMP V1/V2/V3 Flash memory 8Mbytes SDRAM 64Mbytes expandable to 128Mbytes Copper Physical port 3 x shielded RJ45

RJ45 port

10Base-T/100Base-TX, Auto-

negotiation Standard IEEE 802.3 Transmission distance <100m Fiber

Optical power

>-13dbm(SM) >-20dbm(MM)

Receive sensitivity <-28dbm(SM) <-35dbm(MM) Wavelength

1310nm(SM) 1310 nm(MM)

Transmission distance

0 - 40Km(1310nm SM)

0 - 5Km(1310 MM)

Connector SC Transmission rate 125Mbps(100M)

Console Physical interface Shielded RJ45

Interface standard In line with RS232 standard (3 lines) Interface rate 9600bps

Ethernet Switch User Manual

Electromagnetic compatibility

Interference EN55022 Class A Immunity EN61000-6-2

Power Input voltage 24Vdc (18V -36V dc) Input power consumption <7W Over-current protection Built in

Environmental

Operating temperature -40°C ~ 85°C Storage temperature -45°C ~ 85°C Relative humidity 0% ~ 95% Non-condensing Mean Time Between Failure >300,000 hours

Mechanical

Dimensions (H x W x D) 139mm x 56mm x 120mm

5.47” x 4.73” x 2.20”

Protection class rating IP40

Weight 1000g

2 Installation

2.1 Package Contents

• Ethernet switch fitted with DIN rail mount

• 24Vdc PSU (terminal block is connected to 24Vdc power lines)

• Wall-mount bracket

• Flat head screwdriver

• Hardware User manual – on disk

• Management Software manual – on disk

• Serial Data Port Manual – on disk

Please contact you dealer or distributor if a part is missing or damaged.

2.2 Configurations

Products are available in either DIN rail or wall-mount packages, with the following configurations:

Product Type DIN Rail Wall-mount

Multimode Singlemode

ESML3-FL2-D4-S2

  

ESML3-FL2-D4-M2

 



Ethernet Switch User Manual

2.3 Physical Connections

SML3-FL2-D4

PW1

LNK/ACT

10/100M

RUN1

LNK/ACT

RUN2

PW2

ALARM

+ 12 hidden pages

KBC ESML3-FL2-D4-S2, ESML3-FL2-D4-M2 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual