ESMGS8-C2-B Quick Start Guide
ESMGS8-C2-B Quick Start Guide-Rev1709.docx www.kbcnetworks.com
Copyright © KBC Networks Ltd. 2017
Page 3 of 13
1 INTRODUCTION
1.1 ESMGS8-C2-B INTRODUCTION
ESMGS8-C2-B is a managed PoE/PoE+ Industrial Ethernet switch with 8*10/100/1000M
auto sensing electrical ports and 2 *1000M Comb ports. The switch supports PoE/PoE+.
Each of the 8 electrical port outputs up to 30W. The switch supports Ethernet Ring
Protection Switching (ERPS) as well as STP/RSTP/MSTP. It also supports Web-based
network management, VLAN, QoS, SNMP, IGMP snooping etc. Rugged design with IP40
enclosure and industrial level 3 protection makes it suitable for applications such as
Intelligent Transportation System, IP surveillance and industrial networks.
1.2 FEATURES
− 8* 10/100/1000Base-T Ethernet ports (PoE)
− 2 Gigabit Comb ports
− Support EPRS (typical recovery time < 30ms with 250 units of connection)
− Support different redundancy protocols and standards STP / RSTP / MSTP
− Support SNMPv1/v2c/v3 & RMON & Port base/802.1Q VLAN network
management
− Support IGMP Snooping multicast function
− Support WEB, Telnet, SSH, Console (CLI)
− Support open and close port, binding MAC and port
− Support 802.1x network access control
− Support 802.1Q protocol, Isolate network flow
− Support Radius Centralized password management
− Support IEEE802.3af/at standard
− Overload current protection and reverse polarity protection
− IP40 enclosure protection
− Unique DIN mount design makes mount and removal easy
− Both POE and Non-POE models are available
1.3 SPECIFICATIONS
Ethernet
10/100/1000Base-T 8
1000Base-FX SFP 2 (Comb ports)
PoE standard IEEE802.3af/at