KBC EE1R3 User Manual

Download

Extended Ethernet

100 Series Chassis

User Manual

EE1R3

Extended Ethernet User Manual

TABLE OF CONTENTS

1 OVERVIEW ................................................................................. 3

1.1 INTRODUCTION ............................................................................................ 3

1.1.1 EE1R3 ............................................................................................... 3

1.2 TECHNICAL SPECIFICATION .............................................................................. 3

2 INSTALLATION ............................................................................. 4

2.1 PACKAGE CONTENTS ...................................................................................... 4

2.2 CONFIGURATIONS ......................................................................................... 4

2.2.1 Physical Connections ........................................................................... 4

2.3 INSTALLATION METHOD ................................................................................... 5

2.3.1 Chassis .............................................................................................. 5

2.4 POWER CONNECTIONS .................................................................................... 5

2.5 LED STATUS ............................................................................................... 6

3 TROUBLESHOOTING ...................................................................... 7

4 SYSTEM INSTALLATION EXAMPLE ...................................................... 7

5 DIMENSIONS ............................................................................... 8

6 WARRANTY ................................................................................ 9

6.1 WARRANTY INFORMATION ................................................................................ 9

6.2 CLASS A ITE ............................................................................................ 10

6.3 FCC ....................................................................................................... 10

6.4 UL ......................................................................................................... 10

7 INSTRUCTION OF DISASSEMBLY ...................................................... 11

Extended Ethernet User Manual

Connectors

Converter Slots

Electromagnetic compatibility

Interference FCC Part 15 Class A, CE

Power

Power Input

100 ~ 240Vac, 3.3A

Power Consumption

10.7 W / 36BTU – power supply only

88.3W / 301BTU – fully loaded

Power Output Per Slot

5V, 1A

Environmental

Operating temperature

0°C - +50°C / 32F° - +122°F

Storage temperature

-40°C - +70°C / -40F - + 158°F

Relative humidity

5% - 90%, Non-condensing

1 Overview

1.1 Introduction

This manual covers the EE1R3 chassis to be used with the KBC EE1CL series 10/100 Ethernet line drivers.

1.1.1 EE1R3

The EE1R3 chassis allows the KBC EE1CL series, 10/100 Ethernet line drivers to be mounted in a 2.4U, 19” chassis configuration. The chassis supports up to fifteen media converters which are hot-swappable. The chassis is provided with an integral 100 ~ 240Vac, 3.3A power supply and an AC power cord. A fan provides air-flow for system cooling and there are LED indicators for power and fan status.

1.2 Technical Specification

Extended Ethernet User Manual

Chassis front view

P1P2FA

2 Installation

2.1 Package Contents

 Media converter chassis with integral power supply unit  Mounting brackets for 19” enclosure  Rubber feet  AC power cord  Manual

Note: Extended Ethernet EE1CL units are sold separately.

Please contact you dealer or distributor if a part is missing or damaged within 10 days of receiving products.

2.2 Configurations

2.2.1 Physical Connections

Chassis rear view

Extended Ethernet User Manual

2.3 Installation Method

2.3.1 Chassis

 Remove all packaging material  If chassis is to be mounted in a 19” enclosure, attach the supplied rack

mount brackets to the converter chassis.

 Locate the converter chassis with the 19” mounting rails and attach using

the screws provided.

 With the power switch in the ‘OFF’ position, connect the power cord and

then select the ‘ON’ position for the power switch.

 Insert the EE1CL units into the EE1R3 chassis as required.  Connect required media cables to the EE1CL devices.

See section 3.5 for LED status.

2.4 Power Connections

This unit must be powered by a 100 ~ 240Vac, 3.3A power supply, this is an integral unit which is supplied with the chassis.

Extended Ethernet User Manual

LED

Status

Description

Power

PWR

Power is supplied to the chassis

OFF

No power to the chassis

FAN

FAN A

The fan is functioning correctly

OFF

The fan is not powered or there is a fault with the fan

2.5 LED Status

Note: PWR2 and FAN B LEDs are not used on this product.

Extended Ethernet User Manual

3 Troubleshooting

When the chassis is powered on, the green PWR LED will light to indicate the

presence of power. If the green light does not come on check that the power switch

is in the ‘ON’ position.

With power to the chassis the green fan light should be lit to show that the fan is

functioning correctly. If the fan LED remains off when the power is on there is a fault

with the Fan please contact KBC Networks.

4 System Installation Example

Figure 4.1 EE1R3 Typical System Installation

Extended Ethernet User Manual

440mm

88.5mm

Chassis front view

Chassis

depth 140mm

Chassis rear view

P1P2FA

5 Dimensions

Extended Ethernet User Manual

6 Warranty

6.1 Warranty Information

KBC extends the following LIMITED WARRANTY to the original owner/purchaser of this product as follows:

- Five years from the date of initial sale for Ethernet switches.

- Two years from the date of initial sale for all wireless and other network products.

- Five years from the date of initial sale for all fiber products.

1) If, within the specified warranty period, this product, or any part or portion thereof,

shall prove upon examination by KBC, to be defective in material or workmanship,

KBC will repair or replace such part or portion at KBC’s option. The warranty period

on the repaired or replaced part or portion of this product shall be limited to the unexpired term of the original warranty. The buyer shall be responsible for all shipping and transportation of the product to KBC for any performance under this warranty.

2) Conditions and Exceptions: a) Any accident to this product, any misuse or abuse, alternation, use in modified

form, or any attempt to repair this product shall void this warranty. These conditions to the warranty include, but are not limited to, incorrect power connections, physical damage due to mechanical shock, exposure to moisture, and circuit modification.

b) SHOULD THIS PRODUCT PROVE DEFECTIVE FOLLOWING PURCHASE, THE BUYER,

NOT THE MANUFACTURER, DISTRIBUTOR, OR RETAILER, ASSUMES THE ENTIRE COST OF ALL SERVICING OR REPAIR, EXCEPT AS OTHERWISE PROVIDED BY THE TERMS OF THIS WARRANTY.

c) FOR BREACH OF ANY WRITTEN OR IMPLIED WARRANTY ON THIS PRODUCT, THE

BUYER IS LIMITED TO THE FOLLOWING DAMAGES. (1) THE COST OF LABOR TO REPAIR OR REPLACE DEFECTIVE PARTS OR PORTIONS OF THIS PRODUCT, AND (2) THE COST OF THE REPAIRED OR REPLACE PARTS OR PORTIONS OF THIS PRODUCT.

d) NO OTHER EXPRESSED OR IMPLIED WARRANTIES HAVE BEEN MADE OR WILL BE

MADE ON BEHALF OF KBC WITH RESPECT TO THE SALE, REPAIR, INSTALLATION, OPERATION, OR REPLACEMENT OF THIS PRODUCT. KBC DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OF THIS PRODUCT OR ITS FITNESS

FOR ANY PURPOSE, AND THE BUYER AGREES THAT THIS PRODUCT IS SOLD “AS IS” AND THAT THE ENTIRE RISK OF QUALITY AND PERFORMANCE OF THIS

PRODUCT IS WITH THE BUYER, EXCEPT AS OTHERWISE PROVIDED BY THE TERMS OF THIS WARRANTY.

e) Some states/jurisdictions do not allow exclusions or limitations of incidental or

consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you.

f) If you do not wish to be bound by any of the provisions in this warranty, please

return the product(s) immediately.

3) Contact your dealer regarding return authorizations for out of warranty repairs and any further product information.

This warranty does not apply in Australia.

Extended Ethernet User Manual

6.2 Class A ITE

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.

6.3 FCC

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful Interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at this own expense.

6.4 UL

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. Therefore, consideration should be given to installing the equipment in an environment compatible with the maximum ambient temperature (Tma) specified by the manufacturer.

Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised.

Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

Circuit Overloading - Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

Reliable Earthing - Reliable earthing of rack-mounted equipment should be maintained. Particular attention should be given to supply connections other than direct connections to the branch circuit (e.g. use of power strips).

Extended Ethernet User Manual

7 Instruction of Disassembly

Instruction of Disassembly of KBC Product

(For EU Directive 2002/95/EEC-WEEE)

Tools required:

 No. 1 Phillips screwdriver  No. 2 Phillips screwdriver

Steps for disassembly:

1. Remove screws to cover plate.

2. Remove cover plate.

3. Remove mounting screws for printed circuit board (PCB).

4. Take out all PCBs.

Notice: When a product reaches the end of its life, return to KBC Networks.

data delivered

KBC Networks

25691 Atlantic Ocean Drive

Suite 3B

Lake Forest, CA 92630

U.S.A

Americas

Phone: 1-949-297-4930

Fax: 1-949-297-4933

KBC Networks Ltd., EMEA

KBC Networks Ltd.

Barham Court

Teston, Maidstone

Kent, ME18 5BZ

United Kingdom

Phone: +44(0)1622 618787

Fax: +44(0)20 7100 8147

Email: info@kbcnetworks.com

Web: www.kbcnetworks.com

KBC EE1R3 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual