10. Cleaning and Storage
Use an alcohol swab or cotton swab moistened with alcohol
(70% Isopropyl) to clean the thermometer casing and the
measuring sensor lens. Ensure that no liquid enters the interior of
the thermometer. Never use abrasive cleaning agents, thinners or
benzine for cleaning and
water or other cleaning liquids. Take care not to scratch the
surface of the display. After cleaning, replace Protective Cap.
Remove the battery from the instrument if it is not required for extended periods of time in order
to avoid damage to the thermometer resulting from a leaking battery.
11. Replacing the Battery
The VICKS Ear Thermometer is supplied with two AAA
batteries. Replace with new AAA batteries when the low
battery symbol appears on the display. Remove the battery
cover and replace batteries. Replace the cover.
12. Warranty
Your VICKS®Ear Thermometer is durable and manufactured for a lifetime of normal household
use. Following directions carefully will ensure years of dependable operation. If for any reason
(other than misuse or normal battery replacement) you are dissatisfied with your VICKS Ear
Thermometer, we will repair or replace it, at our option, free for one year from the date of
purchase. This Warranty gives you specific legal rights as well as other rights which may vary
from state to state.
If the thermometer does not function properly, first check the battery. Replace if necessary. If
repair is necessary call our Consumer Service Department at 1-800-477-0457, email us at
consumerservice@kaz.com, or write to KAZ Thermometer Service Department, P.O. Box 544,
Hudson, NY 12534, explaining just how the thermometer is improperly working. Our consumer
service representative will provide further instruction on how to correct the trouble yourself or
will ask you to return the thermometer for repair or replacement.
never immerse the instrument in
Low battery symbol
VICKS®
Ear Thermometer
Questions?
Call Kaz toll free at 1-800-477-0457
or E-mail: consumerservice@kaz.com
www.kaz.com
k
Kaz, Incorporated • Thermometer Service Dept. • P.O. Box 544 • Hudson, NY 12534 • www.kaz.com
Distributed by Kaz, Inc. under license from The Procter & Gamble Company, Cincinnati, Ohio USA.
VICKS is a registered trademark of The Procter & Gamble Company.
© 2003 KAZ, Incorporated
Made and printed in China
Manufacturing Quality Healthcare Products for Over 75 Years
QUICK START GUIDE
®
VICKS
FIRST TIME USE:
• “Pull” plastic strip from Battery Compartment. Discard.
• Remove 98.6F label from the LCD display. Discard.
1
2
3
Ear Thermometer Model V971N
Remove
and Save
Protective
Cap.
ON/OFF
Gently Pull
Outer Ear to
Straighten
Ear Canal.
for
Pull Probe Cover Into Position
on Dispenser.
Insert Thermometer Tip Straight
and Push Firmly until “Click.”
Turn Unit “ON”.
Display Indicates Ready
to Measure.
Some Helpful Guidelines For Best Results
When Using the Vicks OneSecond Ear
Thermometer,
• Practice until you receive consistent readings.
• Unit is calibrated with a Sensor Cover.
Accuracy can only be assured when Sensor
Covers are used.
• Call your doctor when your child has diarrhea,
vomiting or changes in appetite, lethargy
(sluggishness) or is unusually sleepy.
• It is important to know each individual’s
“Normal” temperature when they are well.
< 1 Year
> 1 Year
4
5
ON/OFF
Call Kaz at 1-800-477-0457 • e-mail: consumerservice@kaz.com • www.kaz.com
Push
Start
Button.
Turn Please Note: Unit Reads “Oral” Equivalent
Unit Temperature. Add One Degree for “Rectal”
“OFF”. Equivalent. Take 3 or More Measurements
Indicates Complete.
Especially if Readings Appear Low.
Need Assistance?
2
Fully Insert Thermometer Probe
Gently into Ear.
“BEEP”
98.6 °F
This is the only way to accurately diagnose
a fever. Take multiple readings when healthy to
determine “Normal” temperature.
• A child’s normal temperature can be as high
as 99.9°F. Re-measure with a standard digital
thermometer for confirmation.
3
VICKS®Ear Thermometer
Instruction Manual
Thank you for purchasing the VICKS Ear Thermometer (V971N).
The VICKS Ear Thermometer incorporates the latest technology and is tested in accordance with
international standards. With its unique technology, the thermometer provides a stable, heatinterference-free reading with each measurement. The instrument performs a self-test every
time it is switched on to always guarantee the specified accuracy of measurements.
The VICKS Ear Thermometer is intended for intermittent measurements and monitoring of human
body temperature in the home. It is appropriate for use on people of all ages.
Please read these instructions carefully before using this instrument and keep the instructions
and the thermometer in a safe place.
Gentle and Easy to Use
• Soft tip sensor for comfort.
• Special ergonomic design of the unit makes its use simple and easy.
• The VICKS Ear Thermometer can be used without interference to daily lifestyle. A
measurement can be taken even while a child is sleeping.
• The VICKS Ear Thermometer is more pleasant to use and less theratening to children than a
rectal thermometer and is more pleasant to use than an oral thermometer.
Auto-Display Memory
The thermometer displays the last reading automatically for 3 seconds when the unit is
switched ON.
Safe and Hygienic
• No risk of broken glass or mercury ingestion.
• Safe for children.
• Disposable sensor covers help prevent the spread of germs.
Table of Contents
1. The Advantages of your VICKS Ear Thermometer
2. Important Safety Instructions
3. Product Description
4. How the VICKS Ear Thermometer Measures Ear Temperture
5. How to Read the Display
6. How to Apply a New Sensor Cover
7. Directions for Use
8. Error Messages
9. Technical Specifications
10. Cleaning and Storage
11. Replacing the Battery
12. Warranty
1. The Advantages of your VICKS®Ear Thermometer
Measurement in 1 second
This innovative infrared technology enables users to measure body temperature in only 1 second.
Accurate and reliable
Due to the unique patented sensor assembly configuration, the advanced infrared sensor, and
the complete calibration process, this unit offers a very accurate and reliable way of measuring
body temperature.
4
2. Important Safety Instructions
• Never use the thermometer for purposes other than body temperature measurement. Please
follow the safety precautions when using on children.
• Always use the thermometer with a new undamaged Probe Cover for each measurement to
prevent infection.
VICKS branded probe covers can ensure that you get an accurate measurement from the Ear
Thermometer.
• Never immerse the VICKS Ear Thermometer into water or other liquids (not
waterproof). For cleaning and disinfecting please follow the instructions in the
"Cleaning and Storage” (Section 10).
• Keep the instrument and the probe covers away from direct exposure to the sun and store
in a dust-free, dry area at a temperature between 41°F - 104°F.
• Do not use the thermometer if there are signs of damage on the measuring tip or on the
instrument itself. If damaged, do not attempt to repair the instrument!
• Earwax in subject’s ear canal may cause a lower temperature reading. Before taking
measurement make sure the ear canal is clean to ensure an accurate reading.
• The VICKS Ear Thermometer consists of high quality precision parts. Do not drop it! Protect
it from severe impact and shock. Replace protective cap when not in use.
WARNING:
• Please keep the sensor covers out of the reach of children.
• Use of this thermometer is not intended as a substitute for consultation with your
physician.
• This thermometer is not waterproof! NEVER immerse into liquids!
• Cleaning the ear canal using improper techniques can harm the inner ear. Follow
doctors instructions for proper cleaning.
Readings taken without probe covers will not be accurate. Only
5
3. Product Description
(1) Sensor Cover
(2)
(2) Soft Sensor Tip
(3) Readout Display
(4) Start Button
(5) ON/OFF Button
(6) Battery Cover
(7) Senser Cover
(8)
(3)
(4)
(5)
(7)
(6)
Applicator
(8) Protective
Storage Cap
4. How the VICKS®Ear Thermometer Measures Ear Temperature
The VICKS Ear Thermometer measures infrared energy radiated from
the eardrum and the surrounding tissue. This energy is collected
through the sensing lens and converted to a temperature value. The
measured reading obtained directly from the eardrum (Tympanic
Membrane) can ensure the most accurate ear temperature.
Measurements taken from the surrounding tissue of the ear canal
generate lower readings and may result in misdiagnosis of a fever.
To avoid an inaccurate measurement:
• Use VICKS sensor covers. The unit is calibrated to work with sensor covers.
• Straighten the ear canal by gently pulling the middle of the ear back and up. Pull the ear
straightback for newborns to age 1.
• Place the sensor firmly into the ear canal. Press the Start button and keep the sensor in the
ear until the thermometer beeps to indicate completion of the measurement.
The VICKS Ear Thermometer has been clinically tested to meet ASTM standard E-1065
as pertains to infrared thermometers. It is proven to be safe and accurate when used
in accordance with this operating instruction manual.
6
5. How to Read the Display
Display Display Meaning
Self-check ensures proper
functioning.
Recall of last reading.
Ready to measure.
Measurement complete.
Low battery indication.
Unit will not take accurate
measurements.
Description
Press the ON/OFF button to turn
on the unit. All icons will be
shown for 2 seconds.
The last reading will be shown
on the display automatically for
3 seconds.
The unit beeps once and the
°F icon will keep flashing.
The reading will be shown on
the LCD display. When the °F
starts to flash the unit is ready
for next temperature.
The battery icon will flash when
the unit is on to alert you to
replace the batteries.
6. How to Apply a New Sensor Cover
(1) Remove protective cap from thermometer.
Pull sensor cover into position over the hole in
the top of dispenser.
Completely push the tip into the
(3)
sensor cover holder hole. Push firmly.
NOTE:
• Unit is calibrated to work with sensor covers. Only use of VICKS sensor covers ensures
accuracy and hygienic use.
• In order to avoid spreading germs, please use a new sensor cover for each measurement.
• Check to ensure sensor cover is fitted on firmly before use. If the sensor cover is broken,
discard and apply a new one immediately.
• Failure to use sensor covers each time will result in low, misreadings.
(2) With Protective Cap off, push the thermometer
vertically into the center part of the sensor
cover.
(4) After feeling a slight click, take out the sensor
with cover attached tightly.
7
7. Directions for Use
BEFORE FIRST USE:
• Remove insulating plastic strip from Battery Cover.
Important: Prior to each measurement, fit a new undamaged
sensor cover onto sensor. Failure to do so may result in an
incorrect temperature measurement.
1. Press the ON/OFF button. The display is activated to show all
symbols for 2 seconds.
2. The last measurement reading with an “M” icon will be
shown on the display automatically for 3 seconds.
3. When a beep sound is heard and the °F symbol starts
flashing, the thermometer is ready to measure.
4. Straighten the ear canal by pulling the ear up
and back to give a clear view of the eardrum.
• For children under 1 year:
- Pull the ear straight back
• Children ages 1 year to adult:
- Pull the ear up and back.
(Caution: Many pediatricians suggest use of ear
thermometers for children older than 6 months.)
5. While pulling the ear, insert the sensor snugly into the ear
canal and press and release the "START” button. When you
hear a beep sound, this indicates measurement is complete.
6. Remove the thermometer from the ear canal. The display
shows the measured temperature.
7. Replace the sensor cover after each measurement. To do this, please follow the instructions
in Section 6 “How to Apply a New Probe Cover.”
8. In order to assure accurate readings, please wait at least 30 seconds after 3-5 continuous
measurements.
1 year-adult Newborn-1 year
ON/OFF
98.6
F
°
M
Readings Recall Sequence
- - -
12
5. To clear memory:
a) Press and hold START Button.
b) While holding START Button, press and release ON/OFF Button.
After a few seconds the unit will turn on and display the last reading. When the last
reading comes up, release the START Button before the reading disappears. The “M” will
disappear from the Display indicating memory is cleared. When “°F” starts flashing, the
thermometer is ready to take a temperature.
Pressing and releasing the START button after the last 12 readings have all been
recalled will resume the above sequence from reading 1.
NOTE:
• For an infant, it is best to have the child lie on its back with head turning sideways and one
of the ears is facing upwards. For an older child or adult, it is best to stand behind and
slightly to the side of the patient.
• Always take measurements in the same ear as the temperature in the right ear may be
different from that in the left ear.
• Please wait for a few minutes to take the ear temperature after sleeping.
• In the following situations, it is recommended that three temperatures in the same ear be
taken and the highest one taken as the reading:
1) Newborn infants in the first 100 days.
2) Children under three years of age with a compromised immune system and for whom
3) When the user is learning how to use the ear thermometer for the first time until he/she
1. Press the START Button to enter Recall Mode when the power is off.
The memory icon "M" will flash.
M
2. Press and release the START Button to recall the latest
°
F
M
1
2
98.2
M
101.5
M
101.8
the presence or absence of fever is critical.
has familiarized himself/herself with the instrument and obtains consistent readings.
reading. The LCD will display 1 alone with the memory
M
icon when the button is pressed and the most recent
reading when the button is released.
°
F
3. Press and release the START Button again to recall the
M
second latest reading.
°
F
4. Press and release the START Button consecutively to recall
M
readings in succession, up to the last 12 readings.
Caution:
If you are not confident of the readings obtained, confirm temperature with a standard
VICKS digital thermometer.
8
9
8. Error Messages
Display Meaning
Measured temperature too high
Measured temperature too low
* Caution: High fever requires immediate medical attention!
Display / Problem Display Meaning
Room temperature too high
Room temperature too low
Error function display
Blank display
Dead battery indication
Possible cause and remedy
Displays “H“ when measured
temperature is higher than
108.0 °F. Repeat taking
temperature and confirm with
digital thermometer.
Displays “L“ when measured
temperature is lower than 89.6 °F.
See Section 7 for proper
technique.
Possible cause and fault
remedy
Displays “H“ in conjunction
with the “s“ when room
temperature is higher than
104.0 °F.
Display “L“ in conjunction
with the “t“ when room
temperature is lower than
41.0 °F.
Check battery. Possible damage
from dropping or water.
Please check if battery is
loaded correctly.
If the steady battery icon is the
only symbol shown, the battery
should be replaced immediately.
9. Technical Specifications
Type:
Measuring Range:
Accuracy:
Display:
Beeps When:
Memory:
Illuminated Display:
(Back-Lite)
Operating temperature:
Storage/transport temperature:
Automatic Switch-off:
Battery:
Dimensions:
Weight:
Standards:
Please observe the applicable disposal regulations.
Digital Infrared Thermometer IR 1DA1
32.0 - 42.2 °C or 89.6 - 108.0 °F
Laboratory: : ±0.2 °C, 32.0 ~ 42.2 °C
±0.4 °F, 89.6 ~ 108.0 °F
Liquid Crystal Display with 0.1 °C (0.1 °F) resolution.
a. The unit is turned ON and ready for the measurement:
b. Measurement complete: 1 long beep sound.
c. System error, malfunction, or “Hi””Low” measurement.
d. Fever alert: If measurement >99.5F, multiple beeps sound
Automatically displays the last measured temperature.
a. The display will be lighted for 4 seconds when the unit
b. The display will be lighted again for 5 seconds when
-20°C to +50°C (-4°F to +122°F)
-25 °C to +55 °C (-13 °F to 131 °F)
Approx. 1 minute after last measurement has been taken.
2 AAA bateries
122mm (L) x 44 mm (W) x 63 mm (H)
92g (with batteries), 70g (w/o batteries)
Complies with European PrEN12470-5 and U.S. ASTM E-1965
requirements
1 short “beep“ sounds.
3 short “beep“ sounds.
(instead of a single beep).
is turned ON.
the measurement has been completed.
10
11
Loading...