Kaz 63-613, 90100 Owner's Manual

OWNER’S MANUAL

90100 Series
(63-613)

IMPORTANT
SAFETY INSTRUCTIONS

READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS
PRODUCT.

When using electrical appliances, basic precautions
should always be followed to reduce the risk of fire,
electric shock, and injury to persons, including the
following:

1. Use only as described in this instruction manual.

2. This product operates at 120 VAC, 60 Hz only.

3. Do not use this product if it is damaged in any way or
form. Immediately unplug the Environizer™ and
return it for service under the warranty agreement for
repair.

4. To reduce the risk of electric shock, this equipment
has a grounding type plug that has a third
(grounding) pin. This plug will only fit into a
grounding type power outlet. If the plug does not fit
to the outlet, contact qualified personnel to install the
proper outlet. Do not alter the plug in any way.

5. Do not operate this product with a damaged cord or
plug or if the product malfunctions or has been
dropped or damaged in any manner. Return this
product to an authorized service facility for
examination, electrical or mechanical adjustment, or
repair.

6. For indoor use only. This product is not intended for
use in bathroom, laundry areas or similar moist
indoor locations. Never locate this product where it
may fall into a bathtub or other water container.

7. Always unplug this product when not in use or prior
to cleaning.

8. Close attention is necessary when this appliance is
operated near children. This is not a toy.

9. Do not pull, lift or carry by the power cord. Do not
use the cord as a handle, close a door on the cord,
or pull the cord around or against sharp edges or
corners.

10. Do not place this product near any heat sources
such as stoves, radiators, and heaters.

11. There are no user-serviceable parts inside this
product. Any attempt to open and service this unit
will void the warranty and could lead to serious
damage to the unit and/or personal injury.

12. Turn the unit off before unplugging from an electrical
outlet. Grip the plug and pull it from the wall outlet.
Never pull by the cord.

13. Do not handle the product or the plug with wet
hands.

14. Do not put any objects through any grilles or
openings in the product. Keep all openings free of
dust, lint, hair, or other materials which may reduce
airflow.

15. Keep hair, fingers or loose clothing away from grilles
or other openings in the product.

16. Do not operate the unit in areas where flammable or
combustible products or vapors may be present.

17. Do not operate this product in oxygen rich
environments.

18. The collection rod has many edges and areas that
can trap water. The collection rod should be

completely dry before installing it into the unit.

19. READ AND SAVE THESE

INSTRUCTIONS.

1

YOUR ENVIRONIZER

Exit Grille

Control Panel

Release Button

™

:

Collector Rod

Top Cover

OPERATION:

Power Level Knob

Power Indicator

• Ensure the Collector Rod is firmly seated in
place and the top cover is securely latched.

• Turn the Power Level Knob clockwise to the
desired power level. The Power Indicator will
light.

REMOVING/INSTALLING THE COLLECTOR
ROD:

NOTE:

The ionizing process used by the Environizer™
produces small amounts of ozone as a by-

product. The Environizer

™

complies with U.S.
Government limits for acceptable levels of ozone
(less than 50 parts per billion by volume of air
circulating through the product). People with a
history respiratory problems or heart/lung disease
should consult a physician prior to using this
product.

SET-UP:

• Select a firm, level and flat location. For

proper air flow, locate the unit at least 3 feet
(1 M) from any wall or furniture.

• Ensure the exit grille faces away from the

closest wall or furniture.

• Ensure no grilles are blocked.

• Plug into a grounded 120V outlet. See

IMPORTANT SAFETY INSTRUCTIONS.

• Do not lift the Environizer

™

by the Top Cover.

• To remove the Collector Rod:

™

• Unplug the Environizer

.

• Press the Control Panel Release Button and
rotate the top cover back.

• Grip the Collector Rod handle and pull-up
firmly.

• To install the Collector Rod:

• Ensure the Environizer

™

is unplugged.

• The Collector Rod inserts only one way.
Align the Collector with the opening in the

Environizer

™

.

• Press down until the Collector Rod seats
firmly in place. Ensure the top handle is
flush with the surrounding surfaces.

• Rotate the top cover down and securely
latch in place.

2