Listing Constructional Data Report (CDR)
Report Number
211209025GZU-001
Original Issued: 17-Jan-2022 Revised: 26-Jan-2022
Standard(s)
Applicant Manufacturer 1
Address Address
Country Country
Contact Contact
Phone Phone
FAX FAX
Email Email
Kuang Tao Fei
China
15815898754
1.0 Reference and Address
Foshan Topday Optoelectronics
Technology Co., Ltd
Luminaires [UL 1598:2021 Ed.5]
Luminaires [CSA C22.2#250.0:2021 Ed.5]
Foshan Topday Optoelectronics
Technology Co., Ltd
15815898754
ktf@gztopday.com
Huansheng Heng Road, Guicheng
Eastern Industrial Zone B, Sanshan
Nanhai District, FOSHAN Guangdong
528200
NA
ktf@gztopday.com
Huansheng Heng Road, Guicheng
Eastern Industrial Zone B, Sanshan
Nanhai District, FOSHAN Guangdong
528200
Kuang Tao Fei
NA
China
Page 1 of 30
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 2 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
Product
Brand name
Models
Lampholder
Type
Mounting
Type
E26 Wall
E12 Wall
E26 Pole
E26 Celling
Other Ratings
Same construction, except model name.
WAL-189C, W2220-31,W2220-33,W2220-34,
319413752, 319413747, 319413740
WAL-147, W2235-21, W2235-22,
319413741, 319413736, 319413745
Same construction, except model name.
WAL-188, W2205-21, 319413738
Same construction, except model name.
WAL-201, W2205-31-7, 319413735
Same construction, except model name.
WAL-202, W2205-31, 319413679
Same construction, except model name.
WAL-203, W2205-41, 319413750
Same construction, except model name.
Model Similarity
FL-014, W2205-21-8, 319413749
Same construction, except model name.
FL-015, W2235-21-8, 319413743
Same construction, except model name.
WAL-189, W2220-11, W2220-13, W2220-14,
319413734,319413756, 3194143755
Same construction, except model name.
WAL-189B, W2220-21,W2220-23,W2220-24,
319413744, 319413746, 319413748
NA
All models have the similar mechanical and electrical construction, differences among them are
shape, size and mounting means.
120V, 60Hz,
1 X Max.60W type A incandescent lamp or
Max. 30W SBCFL lamp or Max.16W listed
SBLED lamp.
1 X Max.60W type A incandescent lamp or
Max. 30W SBCFL lamp or Max.16W listed
SBLED lamp.
Lamps
Model no.
Difference
WAL-146, W2235-11, W2235-12,
319413737, 319413742
Same construction, except model name.
319413735
1 X Max.60W type A incandescent lamp or
Max. 30W SBCFL lamp or Max.16W listed
SBLED lamp.
2.0 Product Description
Fixed Luminaires
Topday, ELECTRIX, EVOLUTION, TD, Hampton Bay
Model No.
PENL-116, W2235-21-9, 319413733
Same construction, except model name.
Same construction, except model name.
WAL-200, W2235-31,W2235-32, 319413751,
319413754
Same construction, except model name.
Description
The products covered by this report are fixed luminaire suitable for use in wet locations. They
are intended to mount on outlet box.
Ratings
319413749,
319413743
319413734, 319413744, 319413752, 319413738, 319413679, 319413750, 319413735,
319413749, 319413737, 319413741, 319413751, 319413743, 319413733, WAL-188, W220521, WAL-201, W2205-31-7, WAL-202, W2205-31, WAL-203, W2205-41, WAL-189, W2220-11,
W2220-13, W2220-14, WAL-189B, W2220-21, W2220-23, W2220-24, WAL-189C, W2220-31,
W2220-33, W2220-34, FL-014, W2205-21-8, FL-015, W2235-21-8, WAL-146, W2235-11,
W2235-12, WAL-147, W2235-21, W2235-22, WAL-200, W2235-31, W2235-32, 319413756,
3194143755, 319413746, 319413748, 319413747, 319413740, 319413742, 319413736,
319413745, 319413754, PENL-116, W2235-21-9.
2 X Max.40W type B incandescent lamp or
Max. 30W SBCFL lamp or Max.16W listed
SBLED lamp.
319413733
319413734,
319413744,
319413752,
319413738,
319413679,
319413750,
319413737,
319413741,
319413751
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 3 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 1 - External view of model W2220-11, also represent model W2220-21, W2220-31. Difference among
them is size. (W2220-21 size: 178*170*356mm) (W2220-31 size: 204*190*482.5mm))
Photo 2 - Canopy view of model W2220-11.
1
3
4
5
2
6
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 4 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 3 - Lampholder view of model W2220-11, also represent model W2220-21, W2220-31.
Photo 4 - External view of model W2205-21, also represent model W2205-31, W2205-41. Difference among
them is size. (W2205-31 size: 248*241*508mm) (W2205-41 size: 324*305*635mm)
8
7
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 5 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 5 - Canopy view of model W2205-21, also represent model W2205-31.
Photo 6 - Canopy view of model W2205-41.
10
9
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 6 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 8 - External view of model W2205-31-7. (Size: 248*241*508mm)
Photo 7 - Lampholder view of model W2205-21, also represent model W2205-31, W2205-41.
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 7 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 9 - Canopy view of model W2205-31-7.
Photo 10 - Internal view of model W2205-31-7.
13
11
12
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 8 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 11 - Lampholder view of model W2205-31-7.
Photo 12 - External view of model W2205-21-8.
14
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 9 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 14 - Mounting pole view of model W2205-21-8, also represent model W2235-21-8.
Photo 13 - External view of model W2235-21-8 (Size: 293*293*560mm).
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 10 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 16 - External view of model W2235-11, also represent models W2235-21, W2235-31. Difference among
them is size. (W2235-21 size: 178*215*304mm) (W2235-31 size: 241*280*457mm)
Photo 15 - Lampholder pole view of model W2205-21-8, also represent model W2235-21-8.
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 11 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 17 - Canopy view of model W2235-11.
Photo 18 - Lampholder view of model W2235-31.
15
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 12 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 19 - External view of model W2235-21-9.
Photo 20 - Canopy view of model W2235-21-9.
18
16
19
17
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 13 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 21 - Lampholder view of model W2235-21-9.
Photo 22 - Lampholder wire fixing view of models W2235-21, W2235-31.
21
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 14 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 24 - Canopy view of model W2220-21.
Photo 23 - Lampholder view of model W2235-11, W2235-21.
22
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 15 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 25 - Canopy view of model W2220-31.
Photo 26 - Canopy view of model W2235-21.
23
24
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 16 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
3.0 Product Photographs
Photo 27 - Canopy view of model W2235-31.
25
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 17 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
Photo #
Item
no.
1
Name
Manufacturer/
trademark
2
Type / model
2
Technical data and securement
means
Mark(s) of
conformity
3
1 1 Enclosure Various Various
Painted steel metal with min.0.6
mm thick. For all models.
NR
1 2 Gasket Various Various
Silicone material with min.1.0 mm
thick, used for waterproof. Refer
to section 7.0 ill.2 for models used
in detail.
NR
2 3 Supply wire -1 Various Various
AWM, min. 300V, min. 150ºC,
18AWG. Connect to branch
circuit. Supply conductors long
enough to extend not less than
150 mm into the outlet box. Refer
to section 7.0 ill.2 for models used
in detail.
cURus
or
cETLus
Recognized
2 4 Grounding wire Various Various
Bare copper wire. Minimum size:
18AWG. For all models.
NR
2 5
Fiberglass
sleeving
Various Various
Served as mechanical protection
with min. 0.25mm thickness.
NR
2 6 Mounting plate -1 Various Various
Sheet steel with min. thickness
1.20mm. Refer to section 7.0 ill.2
for models used in detail.
NR
3 7
Heat-shrinkable
tubing
Various Various Min. 300V, 150°C, VW-1. cURus
3 8 Lampholder -1 Various Various
E26 base, 250V, min.250W,
Ceramic body without outer screw
thread. Screwshell shall be
copper, copper alloy of at least 80
percent copper, nickel alloy, or
stainless steel. Refer to section
7.0 ill.2 for models used in detail.
cULus
or
cETLus
5 9 Supply wire -2 Various Various
AWM, min. 600V, min. 150ºC,
18AWG. Connect to branch
circuit. Supply conductors long
enough to extend not less than
150 mm into the outlet box. Refer
to section 7.0 ill.2 for models used
in detail.
cURus
or
cETLus
Recognized
6 10 Suspending string Various Various
Stainless with min. Ø 1.5mm
diameter. Used between canopy
and mounting bar/plate. Refer to
section 7.0 ill.2 for models used in
detail.
NR
9 11 Supply wire -3 Various Various
AWM, min. 300V, min. 105ºC,
18AWG. Connect to branch
circuit. Supply conductors long
enough to extend not less than
150 mm into the outlet box. Refer
to section 7.0 ill.2 for models used
in detail.
cURus
or
cETLus
Recognized
10 12 Internal wire Various Various
AWM, min. 300V, min. 105ºC,
min. 18AWG. Use as lampholder
wire. Refer to section 7.0 ill.2 for
models used in detail.
cURus
or
cETLus
Recognized
10 13
Closed-end
connector
Various Various
300V; 105ºC; VW-1; suitable for
2~5 × 18 AWG wire 's connection.
cURus
4.0 Critical Components
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 18 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
Photo #
Item
no.
1
Name
Manufacturer/
trademark
2
Type / model
2
Technical data and securement
means
Mark(s) of
conformity
3
4.0 Critical Components
11 14 Lampholder -2 Various Various
E12 base, 125V, 75W. Plastic
body without outer screw thread.
Refer to section 7.0 ill.2 for
models used in detail.
cULus
or
cETLus
17 15 Mounting plate -2 Various Various
Sheet steel with min. thickness
1.20mm Refer to section 7.0 ill.2
for models used in detail.
NR
19 16 Flexible cord Various Various
SPT-2W, 300V, 105°C, 18AWG x
2C, for external using and for
connection to branch circuit.
Supply conductors long enough to
extend not less than 150 mm into
the outlet box. Refer to section 7.0
ill.2 for models used in detail.
cULus
or
cETLus
19 17 Glue Various Various
Silicone material, used for
waterproof. Refer to section 7.0
ill.2 for models used in detail.
NR
19 18 Chain Various Various
Sheet steel with min. thickness
3.0mm. Refer to section 7.0 ill.2
for models used in detail.
NR
20 19 Mounting plate -3 Various Various
Sheet steel with min. thickness
1.20mm. Refer to section 7.0 ill.2
for models used in detail.
NR
1 20
Labels
(Not shown)
Various Various
Min. 150ºC when attached on
metal surface or ceramic surface.
Suitable for outdoor use, complied
with UL969.
UR
22 21 Wire fixing unit Various Various
polyamides material with min.
thickness 1.20mm. Refer to
section 7.0 ill.2 for models used in
detail.
NR
24 22 Mounting plate -4 Various Various
Sheet steel with min. thickness
1.20mm. Refer to section 7.0 ill.2
for models used in detail.
NR
25 23 Mounting plate -5 Various Various
Sheet steel with min. thickness
1.20mm. Refer to section 7.0 ill.2
for models used in detail.
NR
26 24 Mounting plate -6 Various Various
Sheet steel with min. thickness
1.20mm. Refer to section 7.0 ill.2
for models used in detail.
NR
27 25 Mounting plate -7 Various Various
Sheet steel with min. thickness
1.20mm. Refer to section 7.0 ill.2
for models used in detail.
NR
NOTES:
1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.
2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the
"Mark(s) of conformity" can be used.
3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted and
only visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section
5.0 for details.
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 19 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
No Unlisted CEC components are used in this report.
5.0 Critical Unlisted CEC Components
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 20 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
2.
Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and display
lamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or other
mounting format that prevents turning of the component.
3.
Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or the
equivalent.
4.
Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a metal or nonmetallic enclosure constructed with no openings other than those specifically described in Sections 4 and 5.
5.
Grounding - All exposed dead-metal parts and all dead-matal parts within the enclosure that are exposed
are connected to the grounding lead of the branch circuit.
6.
Polarized Connection - This product is provided with a polarized power supply connection. All lampholder
centre contact are connected only to the ungrounded supply circuit conductor.
7.
Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminating
in soldered connections are made mechanically secure prior to soldering. Recognized Component
separable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other types
specifically described in the text of this report are also acceptable as internal wiring terminals. At points
where internal wiring passes through metal walls or partitions, the wiring insulation is protected against
abrasion or damage by plastic bushings or grommets. All wiring refer to Sec.4.0.
8.
Markings - The product is marked on as labeling system as described in item no. 20 of Section 4.0 as
follows:
- applicant's name or brand name
- model number
- date of manufacture
- electrical ratings (volts, wattage & frequency)
9. Cautionary Markings - The following are required:
- Refer to illustrations 1 and 1a for required text and format
10.
Installation, Operating and Safety Instructions - Instructions for installation and use of this product are
provided by the manufacturer.
1. Proper installation and wiring method.
2. Using circumstance.
3. Proper maintance method.
4. Shall include the description of methods for sealing the mounting surface.
5. Note for a chain pendant luminaire (model W2235-21-9), the power cord need to routed through the chain.
1.
Spacing - In primary circuits, 3.2 mm minimum spacing are maintained through air and 6.4 mm minimum
spacing maintained over surfaces of insulating material between current-carrying parts of opposite polarity
and between such parts and low-voltage circuit or dead-metal parts.
Listed Component - A component part, which has been previously Listed or Certified by an accredited
Certification Organization with no restrictions and is used in the intended application within its ratings.
Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of a
product that has a direct bearing on the product’s conformance to applicable requirements of the product
standard.
Construction Details - For specific construction details, reference should be made to the photographs and
descriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to the
specific construction details described in this Report, the following general requirements also apply.
Recognized Component - A component part, which has been previously evaluated by an accredited certification
body with restrictions and must be evaluated as part of the basic product considering the restrictions as specified
by the Conditions of Acceptability.
6.0 Critical Features
Unlisted Component - A part that has not been previously evaluated to the appropriate designated component
standard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing or
component recognition.
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 21 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
Item
2.3
2.10
2.13
3.1
3.18
MOUNTING ORIENTATION - (such as base up)
SENS DE MONTAGE [par exemple, cette extrémité vers le haut]
S16-L2
MAX ___ WATTS TYPE ___ or
MAX ___ W TYPE ___
Verbatim S32-L1 for
“MAX” and S16-L1
for remainder of
marking text
CAUTION - RISK OF FIRE
ATTENTION - RISQUE D’INCENDIE
Verbatim S24-L1
SUITABLE FOR WET LOCATIONS
CONVIENT AUX EMPLACEMENTS MOUILLÉS
Verbatim S16-L2
WALL MOUNT ONLY
INSTALLATION MURALE SEULEMENT
Verbatim S16-L2
Marking
Text / Format
W2205-21-8, W2235-21-8, W2235-21-9
2.3, 3.1, 3.18
7.0 Illustrations
Illustration 1 - Cautionary Markings
Model
Item
W2220-11, W2220-21, W2220-31, W2205-21, W2205-31, W2205-41, W2205-31-7,
W2235-11, W2235-21, W2235-31
2.3, 2.10, 2.13, 3.1,
3.18
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 22 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
7.0 Illustrations
Font Size
( mm ) ( in ) (points)
1.6 0.062 6
2.4 0.094 10
3.2 0.125 12
4.8 0.188 19
Note:
Type P - Permanent label or nameplate
A label that is intended to remain in the applied position for the lifetime of the luminaire under conditions of
intended use.
Uses: Information required for user maintenance over the expected life of the product.
Material: Metal, plastic, or other suitable material with an adhesive suitable for the temperature involved and
comply with Clause 20.1.7.
Type N - Non-permanent label or nameplate
A label that is intended to remain in place only for the purpose of installation.
Uses: Certification mark, manufacturer’s identification, product identification.
Material: Paper with an adhesive suitable for the temperature involved.
Type T - Temporary label or instruction sheet
A label, instruction sheet, or tag that is not required after installation.
Uses: Installation instructions and information not required after installation.
Material: Printed matter with or without adhesive and/or attachment, intended to be included with or attached to
the product.
L5
On an instruction sheet or tag
Type T
Type T
L6
Visible during component replacement
Type P
Type P
L3
Visible during installation and inspection of
wire connections, located near the supply
connections
Type N
Type P
L4
On the smallest unit package or carton
Type T
Type T
L1
Visible during relamping, after installation
Type P
Type P
L2
Visible during installation
Type N
Type P
S48
Univers bold, Arial bold, Helvetica bold, Zurich BT Bold
Format Location Designation for Marking
Location Designation
Description
Label exposed to a
dry/damp
environment
Label exposed to a
wet environment
S16
Not specified
S24
Univers bold, Arial bold, Helvetica bold, Zurich BT bold
S32
Not specified
Illustration 1a - Cautionary Markings Format
Format minimum size designation for marking height and typeface (clause 20.1.3)
Size Designation
Letter Height
Font typeface,
upper case
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 23 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
7.0 Illustrations
Item No.
2
3
6891011121415161718
19
21
22
23
24
25
Chain
W2235-21-9
Mounting plate -3
W2235-21-9
Glue
W2235-21-9
Lampholder -2
W2205-31-7
Mounting plate -2
W2235-11
Flexible cord
W2235-21-9
W2205-21, W2205-31, W2205-41, W2235-11, W2235-21, W2235-31
Suspending string
W2205-41
Supply wire -3
W2205-31-7, W2205-21-8, W2235-21-8
Internal wire
W2205-31-7
Illustration 2 - Components list
Name
Models used
Supply wire -1
W2220-11, W2205-21, W2205-31, W2205-41, W2205-31-7
W2220-11, W2220-21, W2220-31
Mounting plate -6
W2235-21
Mounting plate -7
W2235-31
Gasket
W2220-11, W2220-21, W2220-31, W2205-21, W2205-31, W2205-41,
W2205-31-7, W2235-11, W2235-21, W2235-31
Mounting plate -1
Lampholder -1
W2220-11, W2220-21, W2220-31, W2205-21, W2205-31, W2205-41,
W2205-21-8, W2235-11, W2235-21, W2235-31, W2235-21-8, W2235-21-9
Supply wire -2
Wire fixing unit
W2205-21, W2205-31, W2205-41, W2235-21, W2235-31
Mounting plate -4
W2220-21
Mounting plate -5
W2220-31
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 24 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
Evaluation Period Project No. 211209025GZU
Sample Rec. Date 9-Dec-2021 Condition Prototype Sample ID.
S211209025-001~
007
Test Location
Test Procedure
[UL 1598:2021
Ed.5] / Clause
[CSA
C22.2#250.0:20
21 Ed.5] /
Clause
-
15 15
-
17.5.2 17.5.2
-
17.5.12 17.5.12
-
17.15 17.15
-
17.39 17.39
-
18.1 18.1
-
18.2 18.2
-
8.1 Signatures
Completed by: Reviewed by:
Title: Title:
Signature: Signature:
Intertek Testing Services Shenzhen Ltd. Guangzhou Branch
Room 02, & 101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2.
Caipin Road, Science City, GETDD, Guangzhou, Guangdong, China
Signature on file
Signature on file
Ground-Screw Assembly Strength Test
Dielectric Voltage-Withstand Test
Bonding Impedance Test
Testing Lab
Engineer
Herman Deng
Xavier Xie
Supervisor
8.0 Test Summary
Normal Temperature Test
Rain Test
Paint Adhesion
Loading Test
A representative sample of the product covered by this report has been evaluated and found to comply with the
applicable requirements of the standards indicated in Section 1.0.
09-Dec-2021 to 30-Dec-2021
The following tests were performed:
Test Description
Determination of the result includes consideration of measurement uncertainty from the test equipment and
methods. The product was tested as indicated below with results in conformance to the relevant test criteria.
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 25 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
BASIC LISTEE
Address
Country
Product
MULTIPLE LISTEE 1
Address
Country
Brand Name
ASSOCIATED
MANUFACTURER
Address
Country
BASIC LISTEE MODELS
MULTIPLE LISTEE 2
Address
Country
Brand Name
ASSOCIATED
MANUFACTURER
Address
Country
BASIC LISTEE MODELS
MULTIPLE LISTEE 3
Address
Country
Brand Name
ASSOCIATED
MANUFACTURER
Address
Country
BASIC LISTEE MODELS
None
None
None
MULTIPLE LISTEE 1 MODELS
MULTIPLE LISTEE 3 MODELS
MULTIPLE LISTEE 2 MODELS
Fixed Luminaires
China
9.0 Correlation Page For Multiple Listings
The following products, which are identical to those identified in this report except for model number and Listee
name, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program.
Foshan Topday Optoelectronics Technology Co., Ltd
Huansheng Heng Road, Guicheng Eastern Industrial Zone B, Sanshan Nanhai District,
FOSHAN Guangdong 528200
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 26 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
10.0 General Information
The Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance with
the requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorization
prior to using alternate parts, components or materials.
COMPONENTS
Components used shall be those itemized in this Intertek report covering the product, including any amendments
and/or revisions.
LISTING MARK
The ETL Listing mark applied to the products shall either be separable in form, such as labels purchased from
Intertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark is
subject to the control of Intertek.
The mark must include the following four items:
1) applicable country identifiers "US" and/or "C" or "US", "C" and "EU"
2) the word "Listed" or "Classified" or "Recognized Component" (whichever is appropriate)
3) a control number issued by Intertek
4) a product descriptor that identifies the standards used for certification. Example:
For US standards, the words, “Conforms to” shall appear with the standard number along with the word, “
Standard” or “Std.” Example: “Conforms to ANSI/UL Std. XX.”
For Canadian standards, the words “Certified to CAN/CSA Standard CXX No. XX.” shall be used, or
abbreviated, “Cert. to CAN/CSA Std. CXX No. XX.”
Can be used together when both standards are used.
If all standards on the ATM have the same standard title, the shared title or its abbreviation may be used in
place of the examples above. Example: "Medical Electrical Equipment" or "MEE"; "Information Technology
Equipment" or "ITE"; "Audio/Video Information And Communication Technology Equipment" or "A/V ICTE".
Note: A facsimile must be submitted to Intertek, Attn: Follow-up Services for approval prior to use.
The facsimile need not have a control number. A control number will be issued after signed Certification
Agreements have been received by the Follow-up Services office, approval of the facsimile of your
proposed Listing Mark, satisfactory completion of the Listing Report, and scheduling of a factory
assessment in your facility.
MANUFACTURING AND PRODUCTION TESTS
Manufacturing and Production Tests shall be performed as required in this Report.
FOLLOW-UP SERVICE
Periodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shall
be scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to the
following:
1. Conformance of the manufactured product to the descriptions in this Report.
2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement.
3. Manufacturing changes.
4. Performance of specified Manufacturing and Production Tests.
In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, the
Applicant shall take one or more of the following actions:
1. Correct the non-conformance.
2. Remove the ETL Mark from non-conforming product.
3. Contact the issuing product safety evaluation center for instructions.
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 27 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
10.1 Evaluation of Unlisted Components
The Applicant will be notified, in writing, via the applicable contact methods, as defined in Section 1.0,
when these components must be selected and sent to Component Evaluation Center (CEC) for reevaluation.
Due to particular testing requirements, some components may be requested to be shipped to specific
labs. Thus, specific shipment destination(s) for each sample will be provided in the written notification.
Managing CEC Location:
Intertek Testing Services Shenzhen Limited Guangzhou Branch
ETL Component Evaluation Center
Room 02, &101/E201/E301/E401/E501/E601/E701/E801 of Room 01 1-8/F., No. 7-2,
Caipin Road, Science City
GETDD Guangzhou, Guangdong, China
Attn: Ms. Joey Kuang
Sample Disposition: Due to the destructive nature of the testing, all samples will be
discarded at the conclusion of testing unless, the manufacturer specifically requests the
return of the samples. The request for return must accompany the initial component
shipment.
Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program,
Intertek may require these components to be tested and/or evaluated at least once annually, more often for
certain components, as part of the independent certification process. The Unlisted Components in Section 5.0
require testing and/or evaluation as indicated.
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 28 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
PRODUCT Test Voltage Test Time
All products covered by this report. 1200V 1 second
Products Requiring Dielectric Voltage Withstand Test:
The test equipment shall incorporate a voltmeter in the output circuit to indicate directly the applied test
2 - a selector switch marked to indicate the test potential; or
1 - a voltmeter in the primary circuit;
either:
potential if the rated output of the test equipment is less than 500VA.
If the rated output of the test equipment is 500VA or more, the applied test potential may be indicated by
the applied test potential, and an audible and/or visual indicator of dielectric breakdown.
The test voltage specified below shall be applied between Primary wiring, including connected components,
and accessible dead metal parts of a portable luminaire that are likely to become energized, including those
parts that are accessible only during relamping. The test voltage may be gradually increased to the specified
value but must be maintained at the specified value for one second or one minute as required.
Test Equipment:
The test equipment shall incorporate a transformer with an essentially sinusoidal output, a means to indicate
In cases 2 and 3, the test equipment shall include a lamp or other visual means to indicate that the test
potential is present at the test equipment output.
All test equipment shall be maintained in current calibration.
3 - a marking in a readily visible location to indicate the test potential for test equipment having a single
11.1 Dielectric Voltage Withstand Test
Method:
One hundred percent of production of the products covered by this Report shall be subjected to a routine
production line dielectric withstand test.
11.0 Manufacturing and Production Tests
The manufacturer agrees to conduct the following Manufacturing and Production Tests as specified:
Required Tests
Dielectric Voltage Withstand Test
Insulation Resistance Test
Grounding Continuity Test
Polarity Test
test potential output.
potential shall be made.
all potential. If all primary circuits cannot be tested at one time, then separate applications of the test
The test shall be conducted on products, which are fully assembled. Prior to applying the test potential,
switches, contractors, relays, etc., should be closed so that all primary circuits are energized by the test
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 29 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
Product
Products Requiring Polarity Test:
One sample of each luminaire design shall be tested at least once per quarter.
Method:
At least once per quarter per luminaire design shall be checked to verify that there is electrical continuity
between the grounded supply-circuit conductors (for example, the identified terminal of a wiring device, the
conductor with white-color insulation). The continuity shall be determined either visually or through the use of
an electrical test.
Products Requiring Grounding Continuity Test:
At least Once per quarter for all products covered by this report.
11.4 POLARITY TEST
Each product listed below shall be subjected to a test to determine that there is continuity between accessible
dead-metal parts of the product and the grounding pin or blade of the attachment plug.
If all accessible dead metal is connected, only a single test need be performed. A visual or audible device
(ohmmeter, buzzer, etc.) may be used to indicate grounding continuity.
The measured or calculated resistance between the point of connection of the grounding means and any non-
current-carrying metal parts described above should not exceed 0.10 Ω.
Test Equipment:
The ground continuitytest apparatus shall be an ohmmeter or similar indicating instrument capable of measuring
0.10 Ω.
Products Requiring Insulation Resistance Test:
All products covered by this Report that the Dielectric Voltage Withstand Test was not conducted.
11.3 Grounding Continuity Test
Method:
Method
One hundred percent of production of the products covered by this Report that the Dielectric Voltage Withstand
Test was not conducted shall be subjected to a routine production line insulation resistance test.
The test shall be conducted on products that are fully assembled. Prior to applying the test potential, should be
closed so that the input circuit is energized by the test potential.
The test potential shall be applied between input circuit and accessible parts, including enclosure, output
terminals. The test potential may be gradually increased to the specified value but must be maintained at the
specified value for the time as required. A voltage of 500 Vdc was applied for a minimum duration of 1 s. The
measured resistance should not be less than 2 MΩ. For safety reasons, the test should be performed with the
luminaire disconnected from the power supply.
Test Equipment
The test equipment is a dc insulation tester capable of delivering the appropriate open circuit voltage (i.e., 500 V
dc), or other suitable equipment.
11.2 Insulation Resistance Test
ED 16.3.15 (16-Oct-2021) Mandatory
Report No. 211209025GZU-001
Foshan Topday Optoelectronics Technology Co., Ltd
Page 30 of 30
Issued: 17-Jan-2022
Revised: 26-Jan-2022
Date/ Project Handler/
Proj # Site ID Reviewer
26-Jan-2022 Herman Deng
2.0 - Added new Brand name "Hampton Bay".
2
Deleted description "also represent model W2220-21,
W2220-31" from title of photo 3.
17
Deleted description "also represent models W2235-21,
W2235-31" from title of photo 17.
18
Changed the title of photo 18 from "Lampholder view of
model W2235-11, also represent models W2235-21, W2235-
31. " to "Lampholder view of model W2235-31. ".
22-27 Added new photos 22, 23, 24, 25, 26, 27.
4.0 21-25 Added new components 21, 22, 23, 24, 25.
Deleted model W2220-21, W2220-31 from item 6 -Mounting
plate -1.
Deleted model W2235-21, W2235-31 from item 15 -Mounting
plate -2.
Added new item 21, 22, 23, 24, 25 into ill.2.
12.0 Revision Summary
The following changes are in compliance with the declaration of Section 8.1:
Section
Item
Description of Change
2
7.0
Xavier Xie
220125179G
ZU
3.0
ED 16.3.15 (16-Oct-2021) Mandatory
Loading...