Kawai anytime x3 ATX3L Owner's Manual

ATX3L

Owner’s Manual

Part Names and Functions

Basic Operation

General Operation

Appendix

3

Thank you for purchasing a Kawai AnyTimeX3 hybrid upright piano!

This owner’s manual contains important information regarding this instrument’s usage and operation.
Please read all sections carefully, keeping this manual handy for future reference.

Table of Contents

Table of Contents ................................3

IMPORTANT SAFETY INSTRUCTIONS ...........4

Part Names and Functions .................8

Basic Operation ...............................10

General Operation ...........................12

1. Selecting Sounds .............................13

2. Metronome ...................................14

3. Virtual Technician (Smart Mode) ............16

4. Reverb .........................................18

5. Tuning .........................................19

6. Transpose .....................................20

7. MIDI Channel .................................21

8. Local Control ..................................24

9. Auto Power O ...............................25

Appendix ........................................26

Troubleshooting ................................26

Connecting to Other Devices ..................27

USB MIDI (USB to Host connector) .....................28

Specications ...................................29

MIDI Implementation Chart ...................30

4

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT SAFETY INSTRUCTIONS

Examples of Picture Symbols

Denotes that care should be taken.
The example instructs the user to take care not to allow fingers to be trapped.

Denotes a prohibited operation.
The example instructs that disassembly of the product is prohibited.

Denotes an operation that should be carried out.
The example instructs the user to remove the power cord plug from the AC outlet.

Read all the instructions before using the product.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.

The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS

SAVE THESE INSTRUCTIONS

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.

9) Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prongs are provided for your safety.
If the provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.

11) Only use attachments/accessories specified by
the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or
sold with the apparatus. When a cart is used,
use caution when moving the cart/apparatus
combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or
when unused for long periods of time.

14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way,
such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed
to rain or moisture, does not operate normally, or
has been dropped.

5

The product is not completely disconnected from the
power supply even when the power switch is turned
off. If the product will not be used for a long time,
unplug the AC power cord from the AC outlet.

● Failure to do so may cause fire in case of
lightning.

● Failure to do so may over-heat the product,
resulting in fire.

This product may be equipped with a polarised line plug (one blade
wider than the other). This is a safety feature.
If you are unable to insert the plug into the outlet, contact an
electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the plug.

When disconnecting the AC power cord’s
plug, always hold the plug
and pull it to remove it.

● Pulling the AC power cord itself may damage
the cord, causing a fire, electric shock or
short-circuit.

Doing so may cause the product to fall over,
resulting in injury.

Do not lean against the keyboard.

When using the headphones, do not
listen for long periods of
time at high volume levels.

Doing so may result in hearing problems.

It is a good practice to place the instrument near the AC outlet and to place the power cord plug in a
position that allows the plug to be disconnected easily in the event of an emergency. Electricity is always
charging while the plug is in the AC outlet even when the power switch is in the ‘OFF’ position.

The chair must be used properly (it must be
used only when playing the product).

● Do not play with it or stand on it.

● Only one person is allowed to sit on it.

● Do not sit on it when opening the lid.

● Re-tighten the bolts occasionally.

Doing so may cause the chair to fall over or your
fingers to be trapped, resulting in injury.

WARNING

The product should be connected to
an AC outlet of the specified voltage.

● If you are going to use an AC power cord,
make sure that it has the correct plug shape
and conforms to the specified power voltage.

● Failure to do so may result in fire.

120V 240V230V

Indicates a potential hazard that could result in death
or serious injury if the product is handled incorrectly.

Do not insert or disconnect the power
cord plug with wet hands.

Doing so may cause electric shock.

WARNING - When using electric products, basic precautions should always be followed,
including the following.

● Do not use other AC adaptors to power this
instrument.

● Do not use the included AC adaptor or AC
power cord to power other equipment.

Use only the AC adaptor included with
this instrument to power the instrument.

Do not disassemble, repair or modify
the product.

Doing so may result in product breakdown, electric
shock or short-circuit.

6

● Doing so may cause the product to become
deformed or fall over, resulting in breakdown
or injury.

Do not stand on the product or exert
excessive force.

● Doing so may result in discoloration or deformation
of the product.

● When cleaning the product, put a soft cloth in
lukewarm water, squeeze it well, then wipe the
product.

Do not wipe the product with benzene
or thinner.

Failure to do so may damage them, resulting in
fire, electric shock or short-circuit.

When connecting the AC power cord
and other cords, take care
not to entangle them.

CAUTION

Indicates a potential hazard that could result in injury
or damage to the product or other property if the
product is handled incorrectly.

Using the product in such areas may result in
product breakdown.
Use the product only in moderate climates (not
in tropical climates).

Do not use the product in the following areas.

● Areas, such as those near windows, where the product is
exposed to direct sunlight

● Extremely hot areas, such as near a heater

● Extremely cold areas, such as outside

● Extremely humid areas

● Areas where a large amount of sand or dust is present

● Areas where the product is exposed to excessive

vibrations

Entry of water, needles or hair pins may result
in breakdown or short-circuit.
The product should not be exposed to dripping or
splashing. No objects filled with liquids, such as
vases, should be placed on the product.

Take care not to allow any foreign
matter to enter the product.

● Doing so may cause the product to generate
noise.

● If the product generates noise, move the
product sufficiently away from the electrical
appliance or connect it to another AC outlet.

Do not place the product near electrical
appliances such as TVs and
radios.

Closing it roughly may trap your fingers,
resulting in injury.

When closing the fallboard, close
it gently.

Failure to do so may cause breakdown of this
product and other devices.

Before connecting cords, make sure
that the power to this product
and other devices is turned
OFF.

OFF

Please lift up the product when moving it.
Please note that the product is heavy and must
be carried by more than two persons.
Dropping the product may result in breakdown.

Do not drag the product on the floor.
Take care not to drop the product.

Doing so may cause the illumination to fall over,
resulting in fire.

Do not place naked flame, such as lighted
candles on the product.

7

The product should be serviced by qualified service personnel when:

●

The power supply cord or the plug has been damaged.

●

Objects have fallen, or liquid has been spilled into the product.

● The product has been exposed to rain.

● The product does not appear to operate normally or exhibits a marked change in

performance.

●

The product has been dropped, or the enclosure damaged.

The product should be located so that its location or position does not interfere with its proper
ventilation. Ensure a minimum distance of 5cm around the product for sufficient ventilation.

Failure to do so may over-heat the product,
resulting in fire.

Ensure that the ventilation is not
impeded by covering the ventilation
openings with items, such as newspaper,
table-cloths, curtains, etc.

The nameplate label is located on
the

underside of the instrument, as

indicated below.

Declaration of Conformity

Products : Hybrid Upright Piano
Model Number : ATX3L
Responsible Party Name : Kawai America Corporation
Address : 2055 East University Drive Rancho
Dominguez, CA 90220
Telephone [phone]

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,

including interference that may cause undesired operation.

This applies only to products distributed by Kawai America Corporation.

Notice regarding electrostatic discharge (ESD)

If the instrument exhibits any malfunction due to electrostatic discharge (ESD), please turn the instrument o and then on again.
Please discharge all static electricity from you before using the external memories such as a USB memory device in order to
avoid any damage on device.

Notes on Repair

Should an abnormality occur in the product, immediately turn the power OFF, disconnect the power cord plug, and then
contact the shop from which the product was purchased.

Instruction for AC power cord (U.K.)

IMPORTANT

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE.

BLUE : NEUTRAL
BROWN : LIVE

As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured RED.
Do not plug either terminal of the power cord to the the ground od AC outlet on the wall.

FCC Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one or more of the following measures:

 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a dierent electrical circuit from the receiver.
 Consult the dealer or an experienced radio/TV technician for help.

Nameplate

8

Part Names and Functions

Part Names and Functions

ac bef

g

h

l

jdik

This section explains the location and functions of the control box and connectors.

9

Part Names and Functions

a LED power indicator

This LED lights up when this instrument’s control box is turned
on.

b POWER Button

This button is used to turn this instrument on/o.
Be sure to turn o this instrument after playing.

* This instrument features a power saving mode that can turn o the

instrument automatically after a specied period of inactivity.

For more information, please refer to the “Auto Power O” setting on

page 25.

c MASTER VOLUME knob

This knob is used to adjust the volume when AnyTime mode is
activated

* The MASTER VOLUME knob will also aect the volume level of the LINE

OUT connectors.

d HEADPHONES jacks

These jacks are used to connect up to two pairs of headphones
simultaneously.

e MIDI IN/OUT jacks

These jacks are used to connect this instrument to external
MIDI devices such as other electronic instruments or computers
in order to send and receive MIDI data.

f USB to HOST port

This port is used to connect this instrument to a computer
using USB “B to A” type cable in order to send and receive MIDI
data.

g Headphone hook

This hook is used to conveniently hang the headphones when
not in use.

h Muer lever

This lever is used to activate/deactivate the muer system of
the acoustic piano.
Pull the lever to activate and push it back to deactivate.

i Damper pedal

This pedal is used to remove all dampers from strings, allowing
them to vibrate freely. Depressing this pedal sustains the sound
after one’s hand have been lifted from the keyboard – greatly
enriching the piano sound, while also assisting smooth “legato”
passages.

j Mute pedal

This pedal is used to mute the acoustic piano sound by
depressing the pedal and sliding it gently to the left, thus
activating AnyTime mode. Do not attempt to activate/
deactivate AnyTime mode while playing the piano as this can
cause serious damage to the action mechanism of this
instrument.

k Soft pedal / Sostenuto pedal

This pedal is used to soften the sound, reducing its volume.
When the “Jazz Organ” sound is selected, the soft pedal is used
to alternate the speed of the rotary speaker simulation
between “Slow” and “Fast” eect modes.
It is also possible to use the Soft pedal as the Sostenuto pedal
by depressing the pedal while turning this instrument on. In
Sostenuto mode, depressing the pedal after playing the
keyboard and before releasing the keys sustain the sound of
only the keys just played. Any keys that are pressed after the
Sostenuto pedal is depressed will not be sustained after the
keys are released.
Furthermore, the Soft pedal is used to select dierent sounds,
change reverb setting, and adjust various other setting of this
instrument.

l DC IN jack

This jack is used to connect the AC adaptor.

10

Basic Operation

Basic Operation

1. Connecting the AC adaptor to this instrument

Connect the included power cable to the DC IN connector
located on the back side of this instrument, in the bottom left
corner.

2. Plugging the AC adaptor’s power plug to an outlet

Plug the included AC adaptor’s power plug into the electric
wall outlet.

3. Turning on the power

Press the POWER button located on the right side of the control
box.
This instrument will turn on and the LED power indicator above
the POWER button will light up to indicate that the instrument’s
control box is turned on.

* This instrument features a power saving mode that can turn o the

instrument automatically after a specied period of inactivity. For more
information, please refer to the “Auto Power O” setting on page 25.

4. Activating AnyTime Mode

Depress the Mute pedal, then slide it gently to the left to mute
the acoustic piano sound and activate AnyTime Mode.

Pedals

(Middle)(Left) (Right)