KASP High Security Combination Padlocks User Manual

PRODUCT SPECIFICATION

Brand KASP
Product Range High Security Combination Padlocks
Catalogue number 119
Date 26/09/2008

Range Description

High security re-settable combination padlocks

Features

• Supertough Molybdenum Steel Shackle - Extra protection
against hacksaw & cropping attacks

• Hardened Steel Electro-plated Lock Body - Extra strength
& resistance against corrosion

• Double Bolted Locking Mechanism - Extra strength to
resist torsion & pull attacks

• Anti Manipulation Locking System - Protects against
manipulation attack

• 4 Dial Re-settable Combination – Re-settable combination
for added convenience & security

• Rust Free Internal Components & Dual Drainage System

- Extra resistance against corrosion

Closed Shackle

• Closed Shackle - Additional shackle protection to resist
shackle attack

Available in open and close shackle options.
These padlocks are supplied display packed, in sealed blister

packs.

Item Number Item Description EAN No Commodity

K11960D
K11960XD

High Security Combination Padlock 60mm – Open
Shackle - display packed
High Security Combination Padlock 60mm – Close
Shackle - display packed

5013969901788 83011000 6
5013969901795 83011000 6

Technical product
information

Body – Hardened steel body, black electro-plated
Shackle – Hardened molybdenum steel, chrome plated
Locking mechanism - Double bolted, 4 dial combination locking

mechanism featuring an anti-manipulation locking system to prevent
intelligent manipulation attack. All internal components are rust free.

Copyright Carl Kammerling International Ltd

code

Carton

Qty

To open the padlock:

1) Using the correct combination code, open the padlock by aligning the
dial wheels with the indicators on the lock body (pre-set factory
combination code 0-0-0-0) and depress the shackle

To lock the padlock:

1) Whilst in the open position, scramble the dial wheels and depress the
shackle into the body of the padlock until it locks

To reset the lock to a combination of your choice:

1) Open the padlock using the preset combination code

2) Insert the change key into the keyhole on the side of the padlock

3) Firmly press the key into the keyhole and turn 90 degress clockwise or
anti-clockwise.

losing the combination]

4) With the change key held at 90 degrees, reset the dials wheels to a
combination of your choice (we recommend that you record your new
combination code and store it in a safe place)

5) With your new combination code set, turn the change key through 90
degrees back to its original position and withdraw it from the key hole

6) Lock the padlock by scrambling the dial wheels and depressing the
shackle into the body of the padlock until it locks

Security rating:

Type
K11960D 10
K11960XD 11

Shackle Dimensions:

Shackle Body

Dimensions mm Dia
K11960D 11 21 28 62
K11960XD 11 21 30 62

Use environment - Normal outdoor use √√
Recommended applications- Gates, garages, shutters, vehicles, site

gates
Standards compliance None applicable
User health and safety

None applicable
information
RoHS/WEEE
compliance

This product range does not fall within the scope of RoHS or WEEE

regulations
Material safety data None applicable

[IMPORTANT: Ensure the change key is fully depressed to avoid

Security
rating

Internal

width

Internal

height Width

Warranty KASP padlocks are guaranteed against defects in manufacture and/or

materials for 10 years

Damage caused through inappropriate use or attempted break in is not

covered
Country of origin Taiwan

Copyright Carl Kammerling International Ltd