Kason 452KL2003 User Manual

APPLICATION:

JOB NAME:

KASON FOOD SERVICE 31-A AMLAJACK BLVD. NEWNAN, GA 30265

SERVING YOU SINCE 1926

1-800-935-2766 WWW.KASONIND.COM

Ø1-5/8 RUBBER GASKET Ø 1-5/8 BRASS WASHER

1/2-14 NSPM MOUNTING UNIT

1/4 NPT UNION COUPLING TAILPIECE WITH NUT

QUANTITY:

PRODUCT NAME: SINGLE PANTRY FAUCET

SPECIAL CONFIGURATION CHECK BASE MODEL AND OPTIONS

MODEL: 452KL2001 W/ 3-1/2" GOOSENECK SWIVEL SPOUT 452KL2002 W/ 6" GOOSENECK SWIVEL SPOUT 452KL2003 W/ 8-1/2" GOOSENECK SWIVEL SPOUT

OPTIONS OR MODIFICATIONS: SUPPLY LINES (24" OR

36" CIRCLE LENGTH) INLET KIT NIPPLES ELBOWS VANDAL RESISTANT KIT

FEATURES:

*SPECIFICATION GRADE FAUCETS FOR YEARS OF DEPENDABLE PERFORMANCE.

*RUGGED LOW LEAD BRASS ALLOY BODY WITH TRIPLE CHROME PLATE FINISH FOR LONG LIFE AND LOW MAINTENANCE.

*LOW LEAD BRASS VALVE STEM AND SEAT USE URETHANE BIBB TYPE WASHER.

SPECIFIER NO:

HANDLES: CROSS STYLE HANDLES: WRIST STYLE CERAMIC CARTRIDGE LOW FLOW AERATOR SPOUT EXTENTIONS OTHER _______________________

MODEL DIM "A" DIM "B" DIM "C"

452KL2001 3-1/2" 7-5/8" 10-7/16"

452KL2002 6" 7-13/16" 11"

452KL2003 8-1/2" 11-13/16" 16-7/16"

ROUGH-IN: Ø 7/8" HOLE

APPROVALS:

MATERIALS:

*LOW LEAD BRASS ALLOY VALVE STEM AND BODY.

*POLISHED, TRIPLE CHROME PLATED VALVE BODY.

*POLISHED CHROME FINISHED TUBULAR BRASS SPOUTS.

*POLISHED CHROME FINISHED HIGH PRESSURE DIE-CAST ZINC HANDLES WITH STAINLESS STEEL SCREWS.

MOUNTING: *1/2" NPS MALE INLET *Ø 7/8" MOUNTING HOLE *1/4" NPT UNION TAIL PIECE

SYSTEM LIMITS: *TEMP: 40 °F MIN. TO 140 °F MAX *PRESSURE 200 PSI MAX. STATIC *2.20 GPM AT 60 PSI

DATE:

ASME A112.18.1/CSA B125.1

NSF-61/9-G