Kason 451KL4401 User Manual
APPLICATION:
8-5/16
[211,0]
4 [101,6]
1-3/4
[44,5]
A
JOB NAME:
KASON FOOD SERVICE 31-A AMLAJACK BLVD. NEWNAN, GA 30265
1-800-935-2766 WWW.KASONIND.COM
8-5/16
[211,0]
3-13/32
[86,4]
4 [101,6]
A
1-3/4
[44,5]
SERVING YOU SINCE 1926
QUANTITY:
SPECIFIER NO:
PRODUCT NAME: 4" HEAVY DUTY WALL MOUNT FAUCET
SPECIAL CONFIGURATION
CHECK BASE MODEL AND OPTIONS
MODEL:
451KL4401 W/ 3-1/2" GOOSENECK SWIVEL SPOUT
451KL4402 W/ 6" GOOSENECK SWIVEL SPOUT
451KL4403 W/ 8-1/2" GOOSENECK SWIVEL
OPTIONS OR MODIFICATIONS:
SUPPLY LINES (24" OR
36" CIRCLE LENGTH)
INLET KIT
NIPPLES
ELBOWS
VANDAL RESISTANT KIT
HANDLES: CROSS STYLE
HANDLES: WRIST STYLE
CERAMIC CARTRIDGE
LOW FLOW AERATOR
SPOUT EXTENTIONS
OTHER _______________________
FEATURES:
*SPECIFICATION GRADE FAUCETS FOR YEARS OF DEPENDABLE
PERFORMANCE.
*RUGGED LOW LEAD BRASS ALLOY BODY WITH TRIPLE CHROME
PLATE FINISH FOR LONG LIFE AND LOW MAINTENANCE.
*LOW LEAD BRASS VALVE STEM AND SEAT USE URETHANE BIBB TYPE
WASHER.
1/2-14 NPSM
MOUNTING NUT
Ø1-5/8 BRASS
WASHER
MODEL DIM "A" DIM "B" DIM "C"
451KL4401 3-1/2" 5-1/8" 7-15/16"
451KL4402 6" 6-31/32" 11-1/16"
451KL4403 8-1/2" 8-23/32" 14-3/16"
ROUGH-IN: Ø 7/8" HOLES ON Ø 4" CENTERS
APPROVALS:
APPROVALS:
1/2-14 NPS INLETS
Ø1-5/8 RUBBER GASKET
MATERIALS:
*LOW LEAD BRASS ALLOY VALVE BODY AND STEM.
*POLISHED, TRIPLE CHROME PLATED VALVE BODY.
C
*POLISHED CHROME FINISHED HIGH PRESSURE DIE-CAST ZINC
HANDLES WITH STAINLESS STEEL SCREWS.
B
MOUNTING:
*1/2"-14 NPS MALE INLETS
*Ø 7/8" MOUNTING HOLES
*4" CENTERS WITH MOUNTING HARDWARE
SYSTEM LIMITS:
*TEMP: 40 °F MIN. TO 140 °F MAX
*PRESSURE 200 PSI MAX. STATIC
*2.20 GPM AT 80 PSI
DATE:
DATE:
ASME A112.18.1/CSA B125.1
NSF-61/9-G
© 2012 Kason Industries, Inc., All Rights Reserved SPEC SHEET REV1 01.2012
APPLICATION:
8-5/16
[210,9]
4 [101,6]
1-3/4
[44,5]
[86,4]
1/2-14 NPSM MOUNTING UNIT
Ø1-5/8 BRASS WASHER
Ø1-5/8 RUBBER GASKET
1/2-14 NPS INLETS
B
C
A
1/2-14 NPSM MOUNTING UNIT
Ø1-5/8 BRASS WASHER
Ø1-5/8 RUBBER GASKET
1/2-14 NPS INLETS
B
C
A
JOB NAME:
KASON FOOD SERVICE 31-A AMLAJACK BLVD. NEWNAN, GA 30265
SERVING YOU SINCE 1926
1-800-935-2766 WWW.KASONIND.COM
QUANTITY:
SPECIFIER NO:
PRODUCT NAME: 4" HEAVY DUTY WALL MOUNT FAUCET
SPECIAL CONFIGURATION
CHECK BASE MODEL AND OPTIONS
MODEL:
451KL4406 W/ 6" SWIVEL SPOUT
451KL4408 W/ 8" SWIVEL SPOUT
451KL4410 W/ 10" SWIVEL SPOUT
451KL4412 W/ 12" SWIVEL SPOUT
451KL4414 W/ 14" SWIVEL SPOUT
451KL4416 W/ 16" SWIVEL SPOUT
451KL4418 W/ 18" SWIVEL SPOUT
OPTIONS OR MODIFICATIONS:
SUPPLY LINES (24" OR
36" CIRCLE LENGTH)
INLET KIT
NIPPLES
ELBOWS
VANDAL RESISTANT KIT
HANDLES: CROSS STYLE
HANDLES: WRIST STYLE
CERAMIC CARTRIDGE
LOW FLOW AERATOR
SPOUT EXTENTIONS
OTHER _______________________
FEATURES:
*SPECIFICATION GRADE FAUCETS FOR YEARS OF DEPENDABLE
PERFORMANCE.
*RUGGED LOW LEAD BRASS ALLOY BODY WITH TRIPLE CHROME
PLATE FINISH FOR LONG LIFE AND LOW MAINTENANCE.
*LOW LEAD BRASS VALVE STEM AND SEAT USE URETHANE BIBB TYPE
WASHER.
MODEL DIM "A" DIM "B" DIM "C"
451KL4406 6" 1-27/32" 4"
451KL4408 8" 2-21/32" 4-3/4"
451KL4410 10" 3-17/32" 5-11/16"
451KL4412 12" 3-31/32" 6-3/32"
451KL4414 14" 4-15/32" 6-21/32"
451KL4416 16" 4-7/8" 7-1/32"
451KL4418 18" 5-13/32" 7-17/32"
ROUGH-IN: Ø 7/8" HOLES ON Ø 4" CENTERS
APPROVALS:
APPROVALS:
MATERIALS:
*LOW LEAD BRASS ALLOY VALVE BODY AND STEM.
*POLISHED, TRIPLE CHROME PLATED VALVE BODY.
*POLISHED CHROME FINISHED HIGH PRESSURE DIE-CAST ZINC
HANDLES WITH STAINLESS STEEL SCREWS.
MOUNTING:
*1/2"-14 NPS MALE INLETS
*Ø 7/8" MOUNTING HOLES
*4" CENTERS WITH MOUNTING HARDWARE
SYSTEM LIMITS:
*TEMP: 40 °F MIN. TO 140 °F MAX
*PRESSURE 200 PSI MAX. STATIC
*2.20 GPM AT 80 PSI
DATE:
DATE:
© 2012 Kason Industries, Inc., All Rights Reserved SPEC SHEET REV1 01.2012
ASME A112.18.1/CSA B125.1
NSF-61/9-G
Loading...