Kason 1806LED Installation Manual

KASON INDUSTRIES, INC

Model 1806LED Light Fixture

May be shipped knocked down as follows: 11806LED000 = 11806LED003 Junction Box and

11806LEDG14 = LED LAMP + Optic Globe

Installation Instruction:

STEP 1: Install junction box, run wires through Junction
Box gasket and make wiring connections.

STEP 2: Assemble housing...

STEP 3: Fill conduit around wires & plugs with sealant
(PROVIDED)

STEP 4: Install globe gasket, lamp and globe.

Globe

Gasket

Housing mounting screws (2)

Housing and

Socket assembly

A #8-32 screw

boss is provided

for a ground

connection.

wires & plugs with sealant

Junction box
gasket

ATTENTION:

Fill conduit around

Mount the junction box 5-1/8"

on center with metal screws,

molly anchors, or other

suitable fasteners.

( NOT PROVIDED )

Insert the supplied hole

plugs using silicone sealant.

( 4 PLUGS & SILCONE

SEALANT PROVIDED )

WARNINGS AND CAUTIONS:
A. All wiring should comply with the National Electric Code.
B. MIN 60 C Supply conductors.
C. Globe must be in place on final assembly.
D. Sealing of wire opening is necessary to prevent condensation
from forming and water collection inside the fixture. Failure to
properly seal fixture will VOID warranty.

REPLACEMENT LAMP:

Kason P/N 11806LED014

- 12 Watt LED Lamp

11806LD8510118
GLOBE w/ Optics

1-24-13 IS-1806LED R6