Page 1
®
5151
KASON MULTIPLE SEAL LATCHES
5151 TWO POINT CYLINDER
LOCKING LATCH
Heavy duty latch with stationary cylinder lock
Provides the ultimate corrosion resistance
SPECIFICATIONS
MATERIAL:
High pressure die-cast zinc body, forged brass
handle and strike housing, forged steel tongue,
malleable iron strike insert, stainless steel tube
Other specifications same as 5050, to the left
Model No. Description Offset
15151S00002 Sta. Cylinder –1/4" to 1/8" (–6.4 to 3.2 mm)
15151S00008 Sta. Cylinder 3/4" to 1-1/4" (19.0 to 31.8 mm)
15151S00012 Sta. Cylinder Flush to 1/2" (0.0 to 12.7 mm)
Cylinder locks may be keyed alike or differently; please specify. Two keys
are furnished. Upper and lower bodies may be ordered separately.
PAGE B18
WALK - IN
INSIDE RELEASE:
Order separately. See
pages B-26 and B-27
for selection
95050004745000 tube sold separately, for use
on all 4545, 4646, 5050, 5151 latches.
4646 TWO-POINT PADLOCKING
Heavy duty latch similar to No. 5151 with padlocking provision only.
Model No. Offset
14646000002 –1/4” to 1/8" (–6.4 to 3.2 mm)
14646000006 Flush to 1/2" (0.0 to 12.7 mm)
14646000008 3/4" to 1-1/4" (19.0 to 31.8 mm)
WARNING: Nos. 4545, 4646, 5050 and 5151 latches cannot
be opened from inside when locked, therefore they should not be
used on doors which are sole means of exit from walk-ins. When
safety latches are required, see Kason SafeGuard® latches in this
section.
© 2016 Kason Industries, Inc.
Loading...