Page 1
®
5050
5050 TWO POINT
CYLINDER LOCKING LATCH
KASON MULTIPLE SEAL LATCHES
Heavy duty two-point locking latch with stationary cylinder
For long doors and heavy-duty applications
Provides the ultimate corrosion resistance
SPECIFICATIONS
MATERIAL:
Forged brass body,
handle and strike
housing, forged steel
tongue, malleable iron
strike insert, stainless
steel tube
FINISH:
Latches polished
chrome
95050004745000 tube sold separately
Model No. Description Offset
15050S00002 Stationary Cylinder –1/4" to 1/8" (–6.4 to 3.2 mm)
15050S00008 Stationary Cylinder 3/4" to 1-1/4" (19.0 to 31.8 mm)
15050S00012 Stationary Cylinder Flush to 1/2" (0.0 to 12.7 mm)
Cylinder locks may be keyed alike or differently; please specify. Two keys are
furnished. Upper and lower bodies may be ordered separately.
MOUNTING:
Holes drilled and
countersunk for 1/4"
(6.0mm) screws
ROD SIZE:
7/8" (22.2mm) dia.;
50-1/4" (1276.4mm)
length. Other
lengths available to
specification
© 2016 Kason Industries, Inc.
PACKAGING:
1 per carton
WEIGHT:
Approx. 8.5 lb.
(3.9kg) per carton
INSIDE RELEASE:
Order separately. See
pages B-25, B-26, and
B-27 for selection
95050004745000 tube sold separately, for use
on all 4545, 4646, 5050, 5151 latches.
4545 TWO-POINT PADLOCKING
Heavy duty two-point latch similar to No. 5050 with padlocking
provision only.
Model No. Offset
14545000002 –1/4" to 1/8" (–6.4 to 3.2 mm)
14545000006 Flush to 1/2" (0.0 to 12.7 mm)
14545000008 3/4" to 1-1/4" (19.0 to 31.8 mm)
WARNING: Nos. 4545, 4646, 5050 and 5151 latches cannot
be opened from inside when locked, therefore they should not be
used on doors which are sole means of exit from walk-ins. When
safety latches are required, see Kason SafeGuard® latches in this
section.
WALK - IN
PAGE B17
Loading...