51 CYLINDER LOCKING LATCH
Strong, economical latch features forged brass
KASON HEAVY DUTY LATCHES
handle and strike housing.
Provides the ultimate corrosion resistance.
Micrometer strike for positive offset
adjustments.
Stationary cylinder lock.
SPECIFICATIONS
MATERIAL:
High pressure
die-cast zinc
body, forged
brass handle and
strike housing.
FINISH:
Polished chrome.
OFFSETS:
See order information.
MOUNTING:
Holes drilled and
countersunk for
1/4" (6.0mm)
screws.
PACKAGING:
1 per carton
WEIGHT:
Approx. 6 lb.
(2.7kg) per
carton.
INSIDE RELEASE:
Order separately.
See pages B-25,
B-26, and B-27
for selection.
51
Strike is included with all models.
Model No. Item Offset
10051S00002 Stationary Cylinder Locking
Latch with Strike
10051S00008 Stationary Cylinder Locking
Latch with Strike
10051S00012 Stationary Cylinder Locking
Latch with Strike
Latch sold separately. For strikes see page B-15.
90050AS- Cylinder Kit
A key number must be specified; 1-50.
–1/4" to 1/8" ( –6.4 to 3.2 mm)
Flush to 1/2" (0.0 to 12.7 mm)
3/4" to 1-1/4" (19.0 to 31.8 mm)
46 PADLOCKING LATCH
Same as No. 51 latch with provision for padlock
only.
WARNING: Nos. 46 and 51 latches cannot
be opened from inside when locked, therefore
they should not be used on doors which are sole
means of exit from walk-ins. When safety latches
are required, see Kason SafeGuard® latches in this
section.
PAGE B16
WALK - IN
10051S00006 Stationary Cylinder Locking Body
10050AS0090 Cylinder & Keys for 51S Latch Body
Cylinder locks may be keyed alike or differently; 50 key changes available; please
specify. Two keys are furnished.
10046000002 Padlocking Latch –1/4" to 1/8" ( –6.4 to 3.2 mm)
10046000008 Padlocking Latch Flush to 1/2" (0.0 to 12.7 mm)
10046000012 Padlocking Latch 3/4" to 1-1/4" (19.0 to 31.8 mm)
© 2016 Kason Industries, Inc.