Kasco CertiSafe 8400C61, CertiSafe 4400C61, CertiSafe 4400HC61, CertiSafe 3400C61, CertiSafe 3400HC61 Operation & Maintenance Manual
...
800 Deere Rd. Prescott, WI 54021 • 715-262-4488 • sales@kascomarine.com • www.kascomarine.com
CertiSafeTM Tank Mixer
Operation & Maintenance Manual
Rev 7/2019
CERTISAFE™ TANK MIXER
OPERATION MANUAL
Table of Contents
Safety First ……………………………………………….…………………………………………………………………Page 3
System Overview …………………………………………………………………………………….………………….…Page 3
System Specifications ……………………………………………………………………………..………………………Page 3
Mounts & Control Panels…………………………………………………………………………………………………..Page 4
Parts Included……………………………………………………………………………………………………………….Page 5
Tank Penetration……………………………………………………………………………………………………………Page 5
Exploded View Parts List……………………………………………....………………………………………..……...…Page 8
Electrical Troubleshooting……………………………………………………………………………..…………..……...Page 9
Maintenance Recommendations……………………………………………....……………………...………………….Page 9
Warranty……………………………………………....…………………………...……………………………………....Page 10
Non-Warranty Repairs……………………………………………....……………..………………………………….....Page 11
Billing……………………………………………......…………………………………………………………...Page 11
Contact Information ……………………………………………....……………………………………………Page 11
2
CERTISAFE™ TANK MIXER
OPERATION MANUAL
Model
Voltage
Phase
Current Draw
Lock Rotor Current
2400C61
120 1 5.7
12
3400C61
120 1 7.0
18
3400HC61
240 1 3.5
9
4400C61
120 1 9.1
40
4400HC61
240 1 4.5
20
8400C61
240 1 9.0
40
IMPORTANT: PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE.
Safety First
• Under NO circumstances should anyone enter the water with the mixer connected
or in operation.
• Running the unit out of water will damage the seals and create a dangerous
situation.
• NEVER lift the unit by the power cord. If you need to remove the mixer, use the
installation cables or installation apparatus.
• The unit must be connected to an GFCI protected circuit.
• Electrical service disconnect in accordance with local and national wiring
standards.
• Consult a qualified professional for electrical installation.
System Overview
The Kasco CertiSafeTM mixer is part of a submerged active mixing system. It is intended for potable water tanks
(20,000 gallons and larger) to eliminate thermal stratification and ice formation, as well as maintaining residual
disinfectant uniformity.
CertiSafe
TM
mixers are shipped prepared for use. The motor is equipped with thermal overload protection. However,
the mixing unit must be continuously submerged to ensure safe operation. It is important the installation provides
appropriate voltage to the motor.
Operating the mixer continuously provides maximum water circulation in your tank. Optional system controls are
available from Kasco for mixer units.
CertiSafe
TM
systems have a maximum operating depth of 50ft. Effective mixing can be achieved in deeper tanks with
mounting at or above this depth.
System Specifications
3
CERTISAFE™ TANK MIXER
OPERATION MANUAL
Floor Mount: RM-100
Suspended Mount: SM-100
Pipe Mount: PM-100
CS-100/CS-200 Control Panel
Mount & Control Panel Options
Kasco offers optional system control panels and mounting kits for mixer units
4
Loading...