Kar Tech MNTB Users Manual

TM

MINI REMOTE

MINI REMOTE CONTROL SYSTEM

PRELIMINARY

USER MANUAL

July 20, 2005

MINI REMOTE

i

INDEX

Description ................................................................... 1

Installation ................................................................... 2

Before applying power ..................................................... 2

Routine Maintenance ....................................................... 3

Maintenance precautions .................................................. 3

Troubleshooting ............................................................. 3

Troubleshooting chart ................................................. 4

Specifications ................................................................ 5

Instructions to the User .................................................... 6

1

MINI REMOTE

DESCRIPTION:

KAR-TECH's MINI REMOTE is a state
of the art microprocessor based
Radio Frequency (RF) remote
control system designed to
provide the machine operator
with the ability to remotely
operate equipment. The machine
operator is still required to follow
OSHA and other applicable
standards when operating the
equipment.

This system is designed with
Frequency Hopping Spread
Spectrum (FHSS) Technology to
eliminate the RF interference
problem in Radio remote
products.

The control system consists of two
major modules: the remote
station (this unit), and a separate
remote receiver (Digital

Controller) sold separately.

Each transmitter is
preprogrammed with a special
radio ID code. The receiver is
programmed to respond only to
the transmitter with the ID code
for which it is set. This feature
allows the equipment to work in
wireless mode in close vicinity of
each other without interfering
with each other. In the event that
a transmitter becomes damaged
and a new one is needed, the
receiver can be reprogrammed to
respond to the new transmitter.