Page 1
Complete audio solution
with plug and play capabilities
Bluetooth connectivity
Onboard Spotify
Dedicated app via Wi-F
Reference Guide
Azimut
Minimalist design,
maximum connectivity
Page 2
UNPACKING
Each K-array amplifier is built to the highest standard and
thoroughly inspected before leaving the factory. Upon arrival,
carefully inspect the shipping carton, then examine and test
your new amplifier. If you find any damage, immediately
notify the shipping company.
CONNECTING
Find the device name on the label sticked on the amplifier
bottom side (i.e. AZIMUT-1021).
Wired connection
On your preferred browser go to the address field and write
the path to the built in web interface (i.e. http://AZIMUT-1021).
Wi-Fi connetion
Connect your Wi-Fi device to the hotspot with the name of
your Azimut (i.e. AZIMUT-1021). On your preferred browser go
to the address field and write http://192.168.10.1
When asked, insert the password 12345678
Bluetooth
Pair your device with the Azimut.
Check that the following parts are supplied with the product.
1x Kommander-KA02 amplifier
1x Rumble-KU44-2 subwoofer
2x Lyzard-KZ14 ultra miniaturized line-array element w/cable
1x K-Audioctrl remote control w/cable
1x Subwoofer cable
1x Power supply w/power cord
2x Line input connectors (Phoenix MC 1.5/3-G-3.81)
3x Self adhesive magnet strip
3x Double-sided bonding strip
Thank you for choosing a K-array product!
To ensure proper operation, please read this owner’s manual
and safety instruction carefully before using the product.
After reading this manual, be sure to keep it for future
reference.
Should you have any questions about your new
device please contact K-array customare service at
support@k-array.com or contact the official K-array
distributor in your country.
Azimut
Reference Guide
Page 3
Azimut
Reference Guide
1
4. Ethernet Port
1. Kommander-KA02
2. Lyzard-KZ14
3. Rumble-KU44-2
2
5. USB ports
11. G P IO
3
6. Optical input
4
7. Analog input
5
8. Balanced LEFT/RIGHT input
6
11
14. Remote control port
12
15. Output LEFT
15
18. Output SUB
14
17. SUB connector
13
16. Output RIGHT
16
17
18
19
19. Balanced connector
109
12. Wi-Fi reset switch
13. Output connection
7
9. Power switch
8
10. DC inlet
Page 4
Azimut
Reference Guide
Output RIGHT
Output SUB Output LEFT
SUB
connector
LOUDSPEAKER CONFIGURATION
Page 5
Azimut
Reference Guide
Main menu
Toggle Bluetooth
Toggle Built-in player
Toggle Analog input
Toggle Optical input
APP
Connection parameters are
collected on a label underneath the
Kommander-KA02 amplifier.
For Wi-Fi connection, default
parameters are:
D e fa u l t I P : 19 2.16 8.10.1
Default password: 12345678
Status LED
Power button
Volume UP
Volume DOWN
Bluetooth switch
REMOTE CONTROL
Standby Power On
Status LED Blinking Solid White
Bluetooth
switch
Keep pressed for 10 s
for pairing
Page 6
ACOUSTICS
Power handling
Subwoofer: 80W
Mid-high speakers: 15W each
Impedance
Subwoofer: 2Ω
Mid-high speakers: 16Ω
Frequency range
45Hz – 19kHz (-10dB)
SPL 1W@1mt
Subwoofer: 87dB
SPL
Mid-high speakers: 82dB
SPL
Maximum SPL
Subwoofer: 100dB
SPL
(continuos) - 106dB
SPL
(peak)
Mid-high speakers: 92dB
SPL
(continuos) - 98dB
SPL
(peak)
COVERAGE
Horizontal
Subwoofer: omni
Mid-high speakers: 140°
Vertical
Subwoofer: omni
Mid-high speakers: 20°
CROSSOVER
Type
Internal digital crossover
TRANSDUCERS
Low frequency
2 x 4” Ferrite Magnet with 1” voice coil
2 x 4” Passive Radiator
Mid-High frequency
4 x 0.5” Neodymium Magnet with 0.5” voice coil
AUDIO INPUT
Analog Balanced
Left: 3-pin phoenix
Right: 3-pin phoenix
Analog Unbalanced
3.5mm Jack Stereo
Optic
Fibre Optic Jack Connector
USB
4 x USB 2.0
Bluetooth
4.1 Bluetooth Low Energy
POWER AUDIO
OUTPUT
Subwoofer
4-pin phoenix (Ch1-Ch2 PBTL cong)
Mid-high speakers
Left: 2-pin phoenix (Ch3 BTL cong)
Right: 2-pin phoenix (Ch4 BTL cong)
REMOTE
Wired Remote
Control
2-pin phoenix
Hardware Control
5-pin phoenix (4 x GPIO ports)
Network
10-100 Mbps Ethernet (RJ45),
Wirelss LAN 802.11n
DSP PROCESSING
Sample Rate
192 kHz
Bit Depth 32 bit
AMPLIFIER
Type
4-channel Class-D audio amplier
Power
4 x 50W @ 4Ω - 10% THD
Azimut Cong
Subwoofer: 100 W @ 2Ω (Ch1-Ch2 PBTL cong)
Mid-high out left: 50 W @ 4Ω (Ch3 BTL cong)
Mid-high out right: 50 W @ 4Ω (Ch4 BTL cong)
PROTECTION
Type
Output Short Protection
DC Oset
Overtemperature
Undervoltage and Overvoltage
40V Load Dump
Open Ground and Power Tolerant
DC POWER
Operating range
24Vdc - 5A
Connector
2.5mm power jack
PHYSICAL
OVERVIEW
Dimensions
Mid-high: 2.2 x 10.0 x 1.2 cm (0.8”x 3.9”x 0.4”)
Subwoofer: 50.0 x 11.6 x 10.1 cm (19.7”x 4.6”x 4.0”)
Amplier: 14.4 x 4.6 x 14.4 cm (5.7”x 1.8”x 5.7”)
Remote: 2.2 x 10.0 x 1.2 cm (0.8”x 3.9”x 0.4”)
Weight
Mid-high: 0.065 kg (0,14 lbs)
Subwoofer: 5.2 kg (11.46 lbs)
Amplier: 0.5 kg (1.10 lbs)
Remote: 0.045 kg (0.10 lbs)
TECHNICAL SPECIFICATIONS
Azimut
Reference Guide
Page 7
K-array declares that this device is in compliance with
applicable CE standards and regulations. Before putting
the device into operation, please observe the respective
country-specific regulations!
WEEE
Please dispose of this product at the end of its
operational lifetime by bringing it to your local collection
point or recycling center for such equipment.
This symbol alerts the user to the presence of
recommendations about the product’s use and
maintenance.
The lighting flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated, dangerous voltage within
the product enclosure that may be of magnitude to
constitute a risk of electrical shock.
SYMBOLS
This device complies with Restriction of Hazardous
Substances Directive.
IMPORTANT SAFETY INSTRUCTIONS
Read these instructions - Keep these instructions
Heed all warnings
• Read these instructions.
• Keep this instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dr y cloth.
• Do not block any ventilation openings. Install in accordance with
the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
• Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit
from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus.
• When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when
unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
Azimut
Reference Guide
Warning. Failure to follow these safety instructions could
result in fire, shock or other injury or damage to the device
or other property.
Page 8
Designed and Made in Italy
K-ARRAY surl
Via Paolina Romagnoli 17 | 50038 Scarperia e San Piero - Firenze - Italy
ph +39 055 84 87 222 | info@k-array.com
www.k-array.com
Loading...