K-array KV50 User Manual

KV50
Vyper
KV50
USER’S MANUAL
English
REV. A1
KV50
CONTENTS
SYMBOLS 3
1. INTRODUCTION 4
2. APPLICATIONS 4
3. KEY FEATURES 4
4. UNPACKING 5
5. WARRANTY 5
7. PHYSICAL 6
8. REAR PANEL 7
9. SERVICE 8
10. SPECIFICATIONS 9
REV. A2
KV50
SYMBOLS
K-array declares that this device is in compliance with applicable CE standards and regulations. Before putting the device into operation, please observe the respective
country-specic regulations!
WEEE
Please dispose of this product at the end of its operational lifetime by bringing it to your local collection point or recycling center for such equipment.
This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read the manual!
Warning! Dangerous voltages: RISK of electric shock.
This symbol alerts the user to the presence of recommendations about the product’s use and maintenance.
This device complies with Restriction of Hazardous Substances Directive.
REV. A3
KV50

1. INTRODUCTION

Vyper K V50 is an ultra-flat passive speaker system comprised of eight 1” neodymium magnet transducers
housed in an elegant and sturdy aluminum chassis. The eight closely spaced cone drivers provide tr ue
line array characteristics - phase coherence, low distortion and focused listening in both the near field and
at a distance from the speaker. A steel bracket accessory provides an ease to mount wall application for
permanent installations. For easier use and integration with other speakers or amplifiers, KV50 allows the
user to select two dif ferent values of impedance (16Ω – 6 4Ω). At 64Ω as many as 16 K V50 speakers can
be powered off a single amplifier channel at 4Ω, which eliminates the need of 70 V amplif iers for wider
distributed installed systems. The KV50 is able to reproduce the whole vocal frequency range with high
inte lligibilit y, starting from 150 Hz. Integ rating one of the K-array subwoof ers (KU3 6, KMT12P), powered by a
KA10-10 amplifier set with specific presets optimized for the KV50 assures exc ellent coverage of the entire
musical frequency range.
All Vyper KV50 components are designed by the K-ar ray R&D department and custom-made under the
K-array quality control system.

2. APPLICATIONS

• Front ll and under-balcony ll
Portable and installed AV systems
Stage and AV studio monitoring

3. KEY FEATURES

Unique performance-to-size ratio
Vertical, Horizontal and 3D line-array applications
Multiple 1” long-excursion full-range cone drivers
Wide horizontal coverage
Electronically protected
• Selectable 16 Ω or 64 Ω impedance
Weather proof, suitable for outdoor installations-
IP54
REV. A4
KV50

4. UNPACKING

Each K-a rray loud speaker is built to the hi ghest sta ndard and t horough ly inspec ted befor e leaving th e factor y. Upon arr ival, carefully inspe ct the shipping car ton, then examine an d test your ne w loudspe aker. If you find any damage, i mmediate ly notif y the shipp ing comp any. Only the c onsigne e may instit ute a claim procedur e regardi ng the syste m’s electro nic equip ment.

5. WARRANTY

K-array systems are warranted against manufacturing defects in materials or craftsmanship over a period of 2 years from the date of original purchase. During the warranty period K-array will, at its discretion, either repair or replace products which prove to be defective provided that the product is returned in its original packaging, shipping prepaid, to an authorized K-array service agent or distributor. K-array cannot be held responsible for defects caused
by unauthorized modications, improper use, negligence, exposure to inclement weather conditions, acts of God
or accidents, or any use of this product that is not in accordance with the instructions provided by K-array. K-array is not liable for consequential damages. This warranty is exclusive and no other warranty is expressed or implied. This warranty does not affect your statutory rights.

6. SAFETY

WARNING
Only install the speaker in a location that can
structurally support the weight of the unit. Doing otherwise may result in the unit falling down and causing personal injury and property damage.
Professional loudspeakers are capable of
producing extremely high sound levels and should be used with care. Hearing loss is cumulative and can result from extended exposure to levels in excess of 90dB.
Do not operate the speaker for an extended period
of time with the sound distorting.This is an indication of malfunction, which can cause heat build-up and
result in a re.
Never stand close to loudspeakers driven at high level.
Suspending the system should only be done by qualied personnel, following safe rigging practices. Secure xings to the building structure are vital.
If there is any doubt, seek professional help from architects, structural engineers or other specialists.
• No open ame sources, such as lighted candles,
should be placed near the device.
Do not attempt to disassemble the unit. The unit contains no user serviceable parts. Repairs should be performed only by factory trained service personnel.
REV. A5
KV50

7. PHYSICAL

3.6 cm
1.42”
3.6 cm
1.42”
2 cm
0.79”
20 cm
7.87”
50 cm
19.7”
weight: 0.7 kg (1.54 lb)
REV. A6
KV50

8. REAR PANEL

1) Mounti ng M5 screw holes. Mo st K-array mounting o r
flying accessories are designed to screw into the speakers using th ese holes. The KV5 0 is equipped with t wo screw holes.
2) I mpedanc e switch (16 Ω or 6 4 Ω). Selects t he
impeda nce of the sp eaker. Please r efer to your a mplifi er’s specifications to select the correct speaker impedance for your configuration.
1
2
REV. A7
KV50

9. SERVICE

To obtain service:
1) Contact the ofcial K-array distributor in your country. Your local distributor will direct you to the appropriate
service center.
2) If you are calling for service, please have the serial number(s) of the unit(s) available for reference. Ask for Cus-
tomer Service, and be prepared to describe the problem clearly and completely.
3) If the problem cannot be resolved over the phone, you may be required to send the unit in for service. In this
instance, you will be provided with an RA (Return Authorization) number which should be included on all shipping
documents and correspondence regarding the repair. Shipping charges are the responsibility of the purchaser.
Any attempt to modify or replace components of the device will invalidate your warranty. Service must be perfor­med by an authorized K-array service center.
Cleaning:
Use only a soft, dry cloth to clean th e housing. Do not use any s olvents, c hemica ls, or cleaning solu tions conta ining alc ohol, amm onia, or ab rasives. D o not use any sprays near the produc t or allow li quids to spill into any openings.
REV. A8
KV50

10. SPECIFICATIONS

KV50
Acoustics
Power handling 150 w
Max Power 300 w
Impedance 16 or 64Ω (selectable)
Frequency range 200 Hz - 20 KHz.
SPL 1W / 1mt 86 dB
Maximum SPL 108 dB continuous - 114 dB peak
Horizontal 110°
Vertical 10°
Type External Crossover required
Frequency 150 Hz, 24 dB/oct suggested minimum
Full range 8 x 1” Neodymium magnet with 75” voice coil
Connectors 2 x 2-pin screw terminals
Type KA7, KA7-7, KA10, KA10-10, KA40 (with dedicated preset)
Dimensions 3.9 x 50 x 2,1 cm (1.54” x 19.69” x 0.83”)
Weight 0.67 Kg (1.48 lbs)
Notes for data
1. Maximum RMS applicable power for a musical signal, the reference signal is the one proposed by EIAJ standard.
2. Measured @4 mt then scaled @1 mt
New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this brochure.
(AES)
1
2
Coverage
Crossover
ransducers
Audio Input
Physical
DISPERSION GRAPHS
120° 60°
8 KHz
4 KHz
1 KHz 500 Hz
250 Hz
150°
back
180°
back
-150°
-120°
left
top
90°
-90°
front
botton
30°
-30°
-60°
horizontal
left
top
90°
120° 60°
150°
front
front
back
180°
back
-150°
-120°
-90°
front
botton
30°
front
front
-30°
-60°
vertical
REV. A9
KV50
The contents of thi s manual are furnish ed for info rmatio nal purpo ses only. Hp Sound Equipment s.r.l. as sumes no respon sibilit y for any er rors or inacc uracies that m ay appear in this m anual. Hp Sound Eq uipment s.r.l. res erves the ri ght to make modif ications without prior notice.
K-array s.r.l. unipersonale
Via Paolina Romagnoli - 50037
San Piero a Sieve (Firenze) - Italy
tel. +39 055 8487222 - fax. +39 0558487238 e-mail: info@k-array.com
www.k-array.com
Loading...