K-array KTL2, KTL2C User Manual

KTL2 KTL2C

74,2

121

46,9

121,5

130

121,5

121

121,1

46,9

2” point source multipurpose loudspeaker with integrated RGB LEDs

KTL2

Features

High performance-to-size ratio

Integrated RGB LEDs

Single 2” long excursion full range driver

Wide-range frequency response

Double voice-coil driver for variable impedance 8-32ohm

Compact aluminium ultra strong chassis

121

74,2

46,9

121,1

KTL2C

Applications

Audio for museum and exhibit displays

Space-sensitive lls and distributed systems for speech and music

Suitable for theatres and broadcast

Installed audio-visual systems

Colors available

Black White

130

121,5

installed sound

KTL2 KTL2C

The Tornado series is a miniature sound source designed for high-quality distributed systems.

Housed in a compact aluminium enclosure, the Tornado is suitable for space sensitive and architectural design installations.

The Tornados are a turn-key loudspeaker solution; designed as passive speakers, that can be easily converted into self-powered devices by inserting the KA1-T2 12V/24V amplier

module.

In addition to the standard features of the Tornado loudspeakers, the KTL2 and KTL2C have 6 integrated RGB LEDs that can be controlled thanks the wide range of K-array

accessories via DMX or by remote. With its ability to effortlessly reproduce speech, music and lighting, it is an excellent choice for xed applications such as theatre, museum

displays, restaurants, portable systems for corporate AV presentations, department stores, and in hidden locations such as chancel steps in houses of worship.

The KTL2 and KTL2W come with a wall bracket for xed installations or surface applications.

The KTL2C and KTL2CW come with a ceiling brackets for ceiling mounts.

All Tornado components are designed by the K-array R&D department and custom made under the K-array quality control system.

rev. A

KTL2 KTL2C

Speaker power handling

Impedance

Frequency range (-10 dB)

Maximum SPL

Horizontal

Vertical

Type

Frequency

Full-range

Impedance

Connectors

Wiring

Connectors

Wiring

Dimensions

Weight

KTL2 KTL2C

Acoustics

(AES)

18 W

8Ω - 32Ω (settable)

150 – 18 kHz

101 dB (cont.) – 107 dB (peak)

Coverage

Crossover

External crossover required

150Hz 24dB/Oct minimum required

Transducers

2” Neodymiun magnet Woofer with 2 voice coils of 0.8”

2 x 16 Ω

Power Audio Input

4-pin Phoenix connector

VoiceCoil A=1+ 1- VoiceCoil B=2+ 2-

LED connections

4-pin Phoenix connector

R=1+ ; G=1- ; B= 2+ ; V=2-

Certication

Physical

110 mm x 75 mm x 70 mm (4.33“ x 2.95” x 2.76 “)

0.54 Kg (1.19 lb) 0.59 Kg (1.30 lb)

(1)

90°

(2)

110 mm x 75 mm x 70 mm (4.33“ x 2.95” x 2.76 “)

installed sound

DesigneD as passive speaker, the new tornaDos can be easily converteD into

self-powereD Devices by inserting the ka1-t2 12v/24v amplifier moDule.

Audio Input

Connectors

Nominal Power Output

Protections

Frequency response

THD+N 1kHz,1 W

Nominal voltage

Operating range

4-pin Phoenix connector

Wiring

IN – (-) IN + (+) GRD (Ground)

Power Input

4-pin Phoenix connector

Wiring

VCC (+) GND (common)

Amplier

Type

1 Module Class D Electronically Processed

32 W @ 8 Ω 1% THD + NOISE

Dynamic limiter, over current, over temperature, short circuit power supply polarity inversion

20Hz – 20kHz (+/- 3 dB) for 1W @ 8 Ω

0,100%

DC Power

12/24 Vdc

10 - 26 Vdc

I. Nom.

0.4 A / 24 Vdc

KA1-T2H specs

Notes for data

1. EIAJ Test Standard, 1KHz, 1%THD

Notes for data

1. With Dedicated preset

2. Measured with musical signal

New materials and design are introduced into existing products without previous notice.

Present systems may differ in some respects from those presented in this sheet.

Consumptions

Efciency

1/8 rated power

(pink noise)@ 8Ω

N.A.

83%

Physical

Dimensions

(1 )

35 mm x 40 mm x 14 mm (1,37“ x 1,57” x 0,55 “)

Weight

40 g (0.08 lb)

KA1-T2H

rev. A