K-Array KR102 I Data Sheet
Pinnacle-KR102 I
High-tech ultra-light powered stereo system
DESCRIPTION
DATAS HE E T
DATAS HE E T
The KR systems are integrated, self-powered
speaker systems, featuring mid-hi line array
elements matched to powered subwoofers.
All systems feature two channels of Class D
amplification housed in the subwoofer. The
rear panel provides input for 2 balanced
line signals and a digital signal in AES/EBU
protocol. And with the K-dante accessory,
the system can be used in a Dante network.
An integrated touch screen provides intuitive
managing and editing of powerful DSP
controlling: Input and output levels, In/
Out routing, subwoofer delay up to 12 ms,
Speakon output to the mid-hi element
with delay up to 12 ms, and overall system
delay up to 330 ms. All DSP functions,
including EQ can be controlled with remote
managing software via USB or RS485, again,
conveniently on a standard XLR.The unique
four-corner port configuration gives
symmetrical back loading to the sub speaker
for extended bass response with very low
distortion.
This also gives incredible structural strength
to the cabinet despite its light weight. Pocket
handles in the sub and an M20 thread mount
position for attaching mid-high speakers,
with a variety of mounting and rigging
hardware options make the systems very
versatile in almost any application and in
every type of venue.KR102 features pair of
KMT12 (12”) subs each with 2 channels of
1,000 W matched to a Kobra loudspeaker
with 16 x 2” neodymium
speaker elements.
The KR102 system is designed by the K-array
R&D department and custom made under
the K-array quality control system.
SYSTEM COMPONENTS
2x
2x 2x
Portable System
Pinnacle-KR102 I
COLORS & PREMIUM FINISHES AVAILABLE
Black
White
Custom
SUGGESTED ACCESSORIES
K-B A SE2
K-D A N T E
K-F LY2
K-F O O T 2
K-J O I N T 2
K-POLE1
FEAT U RES
Discreet
Lightweight
On-Board
Touch Screen
CompatibleVisually
Pure Array
Technology
(PAT )
Rumble-KMT12I
Kobra-KK102I
2x 2x
K-FOOT2 K-JOINT2
FREQUENT APPLICATIONS
EVENT PRODUCTIONS
BROADCAS T & STUDIOS
FITNESS & WELLNESS
HOUSES OF WORSHIP
CAFES, BISTROS & RESTAURA NTS
RETAIL
HOTELS
THEATERS & CONCERT H ALL S
K-Pole1
Ver. 2.0
TECHNICAL SPECIFICATIONS
Rumble-KMT12 I Kobra-KK102 I
ACOUSTIC S ACOUSTIC S
(AES)
Power handling
Impedance
700 W
8 Ω
Power handling
Impedance
(AES)
400 W
8Ω or 32Ω (selectable)
DATAS HE E TDATAS HE E T
Pinnacle-KR102 I
Portable System
Frequency range
Maximum SPL
40 Hz - 150 Hz ± 3dB (preset relating)
128 dB continuous - 134 dB peak
Frequency range
Maximum SPL
COVERAG E COVERAG E
Horizontal
Vertical
Omni°
Omni°
Horizontal
Vertical
CROSSOVER CROSSOVER
Type
Frequency
DSP controlled
150 Hz (preset dependent)
Frequency
TRANSDUCER S TRANSDUCER S
Full-range
AMPLIFIERS
Type
Power
Protection
1 x 12” Neodymium speakers with 3” voice coil
1 modules class D - DSP controlled
2x1000 Watt @ 8Ω
Dynamic limiter, over current, over temp,
short circuits
Full-range
POWER AUDIO
INPUTS
Connectors
SELECTION
SWITCHES
PHYSICAL OVERVIEW Vertical pattern
Dimensions
Weight
32.6 x 32.7 x 43.5 cm
(12.83“ x 12.87” x 17.04“)
15.6 Kg (34.39 lb)
(1)
Impedance
PHYSICAL
OVERVIEW
Dimensions
Weight
1. ( W x H x D)
Notes for data
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this catalogue.
Type
Wiring
150 Hz - 20 KHz.
124 dB continuous - 130 dB peak
110°
10°- 35° (selectable)
External Crossover required
High pass @150 Hz, 24 dB/oct suggested
minimum
16 x 2” Neodymium magnet with 0.75” voice
coil
2 x 4-pin Speakon
1+ 1- (signal IN & LINK); 2+ 2- (through)
Spot - Flood
16Ω - 64Ω
5.9 x 100.0 x 8.1 cm
(2.93“ x 39.37” x 3.18 “)
4.8 Kg (10.58 lb)
(1)
Ver. 2.0
Loading...