vertical
horizontal
500 Hz
250 Hz
8 KHz
4 KHz
1 KHz
500 Hz
250 Hz
8 KHz
4 KHz
1 KHz
Accessories:
• K-KLINK: Link hardware for Kobra line
array elements
• K-KFLY: tilter for own line array
applications
• K-KCLAMP: Clamp for hanging
• K-KWALL: Bracket for wall xing
• K-KWIRE: 2-channels link cable
• K-K35MM: 35mm adapter
KK50
Acoustics
Power handling 150 W
(AES)
Impedance 16 Ω or 64 Ω
Operating
frequency range
150 Hz - 19 KHz
SPL 1W/1mt 92 dB
Maximum SPL 114 dB continuous - 120 dB peak
Coverage
Horizontal 100°
Vertical 10°
Crossover
Type External crossover required
Frequency 150 Hz, 24 db/oct suggested minimum
Transducers
Full-range 8 x 2” neodymium 0.75” voice coil
Power Audio Input
Connectors 2 x 4-pins Speakon
Wiring
Pin 1+ (IN/OUT 1+) Pin1- (IN/OUT 1-)
Pin 2+ (IN/OUT 2+) Pin2- (IN/OUT 2-)
Selection Switches
Impedance 16 Ω - 64 Ω
Channel CH1 - CH2
Recommended Ampliers
Type 64 Ω
Single ended mode:
KA7, KA7-7, KA10, KA10-10, KA40
for up to 16 units each channel
Bridge mode:
KA7, KA7-7, KA10, KA10-10
for up to 8 units each amplier
Type 16 Ω
Single ended mode:
KA7, KA7-7, KA10, KA10-10
for up to 4 units each amplier
Physical
Dimensions 5.6 x 51.5 x 7 cm (2.2” x 20.28” x 2.76”)
Weight 2 Kg (4.41 lbs)
Notes for data
New materials and design are introduced into existing products without previous notice.
Present systems may differ in some respects from those presented in this brochure.
90°
120° 60°
30°
-30°
-60°
150°
-90°
180°
-150°
-120°
0°
frontback
90
120° 60°
30°
-30°
-60°
150°
-90°
180°
-150°
-120°
0°
frontback