K-Array KK102W I Data Sheet

Kobra

KK102 Mark I

3D line array element, variable beam speaker

DATASH E E T

Installed Sound

FE AT U R E S

• Unique performance-to-size ratio

• Vertical, Horizontal and 3D line-array applications

• Multiple 2” long-excursion full-range cone drivers

• Wide horizontal coverage

• Electronically protected

• Selectable 8 Ohm or 32 Ohm impedance

• Weather proof, suitable for outdoor installations - IP54

COLO RS AVAIL A BLE

Black

White

Specific RAL code for a customized painted model

DESCRIPTION

The K-array KK102 is a passive speaker system comprised of sixteen 2” neodymium magnet transducers h oused in an elegant and s turdy stainles s steel chassis. T he vertic al dispersion p attern can be switched for wide or narrow coverage, allowing for a great variety of applications. The sixteen closely spaced cone drivers provide true line array characteristics - phase coherence, low distortion and focused listening in both the near field, and at a distance from the speaker. A variety of rigging accessories provides many linking and hanging options for the KK102 (1 meter) and the smaller (0.5 meter) KK52 to be combined in vertical and horizontal line array configurations to satisfy many different venue requirements during temporary events and for permanent installations. For easier use and integration with other speakers or amplifiers, the KK102 allows the user to select two different values of impedance (8Ω – 32Ω). At 32Ω as many as 4 KK102 speakers can be powered off a single amplifier channel at 8 Ω (up to 8 elements at 4Ω). The KK102 is able to reproduce the whole vocal frequency range with high intelligibility, starting from 150 Hz. Integrating one of K-array powered subwoofers (KMT12, KMT18, KMT21, KMT218), configured with specific presets for the KK102 assures excellent coverage of the entire musical frequency range. The K-array KA amplifier series have pre-sets optimized for KK102 use. All KK102 components are designed by the K-array R&D department and custom-made under the K-array quality control system.

APPLICATIONS

Broadcast/ TV Studio

KK102 I

Brushed, Polished, Gold Plated and Stainless steel finishes

ACCESSORIES

K-B A S E2, K-FLY2 , KK- C LUS T E R0, KK-CLUSTER30, KK-KLUSTER60 K-F O OT2,

K-JOINT2, KK-STAGE, K-WALL2L, K-WALL2, K-KCLAMP/S, K-KCL AMP

Club/ DJ Set

Corporate/AV

Hospitality

House of Worship

Large Congregations

Live Concerts

Store

Theatre

Theme Park

Ver. 2.6

The vertical dispersion

pattern can be switched

for wide or narrow coverage, allowing

for a great variety of

applications.

DATASH E E TDATASH E E T

KK102 I

Installed Sound

TECHNICAL SPECIFICATIONS

ACOUSTICS

Power handling 400 W

Frequency range 150 Hz – 20 kHz (- 3dB)

Impedance 8 Ω / 32 Ω (selectable)

SPL 1W/1mt 98 dB

Maximum SPL 124 dB (cont.) – 130 dB (peak)

Horizontal 110°

Vertical 7° / 35° (selectable)

Type External Crossover required

Frequency

Notes for data

1. With dedicated preset;

2. Measured @4 mt then scaled @1 mt;

3. Measured with musical signal

New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.

(AES)

(1)

(2)

COVERAGE

CROSSOVER

High pass @150 Hz, 24 dB/oc t suggested minimum

Full range

Impedance 8 Ω / 32 Ω

(3)

Coverage Spot / Flood

Connector 2 x 4-pin Speakon

Wiring 1+ 1- (signal IN & L INK); 2+ 2- (through)

Type K A24, KA84, KM T

Dimensions

Weight 4.8 kg (10.6 lbs)

TRANSDUCERS

16 x 2” Neodymium magnet with 0.75” voice coil

SELECTION SWITCHES

POWER AUDIO INPUT/OUTPUT

RECOMMENDED AMPLIFIERS

CERTIFICATIONS

IP 54

PHYSICAL

5.9 x 100.0 x 8.1 cm (2.93” x 39.37” x 3.18”)

3,6

Ver. 2.6

90,7

5,6

143,3

28,1

713,4

39,4in

1000mm

5,6in

143,3mm

2,3in

58,5mm

www.k-array.com