K-Array KAN200 Specifications
AnaKonda - KAN200
Flexible array element speaker
Patent pending
KAN200
installation
KAN200
Features
Flexible 2mt chassis
Integrated NL4 connectors
High impedance for long lines
IP55 for outdoor installations
Fabric socks available in black and white
Like every K-array product, the Anakonda KAN200 is a revolutionary speaker module born to meet the needs of places where
few had dared to go up to now. It is designed to be a problem solver in all those situations where a traditional speaker box can’t
be used but where good intelligibility, ultra-reliability and a sleek design are required.
The KAN200 is the perfect t for any distributed sound application. Its dedicated presets work on a wide frequency range and
can be used as a PA system in stand - alone and in combination with K-array subwoofers. Its lightness and exibility help it to
be easily integrated in existing structures.
One KAN200 module is 2 mt long and can be extended with additional KAN200s up to a maximum of 16 elements on one line,
which allows you to create 32mt of continuous sound line. Each module is equipped with two speakon NL4 connectors, the
male and female are located respectively at the top and bottom, and are completely integrated in the “body” of the speaker.
Once they are connected, they are hidden in the shape of the line.
Each KAN200 is provided with 2 fabric socks, one black and one white, which can be used to cover and protect the speaker
from foreign objects such as dust, and also give the possibility of changing colors in a ash. Wall brackets are included in the
package to make the installation as easy and as fast as possible.
All the components of the Anakonda KAN200 are designed by the K-array R&D department and made in Italy under the K-array
quality control system.
Applications
Front lls
Outdoor installations
Theme parks
Indoor and outdoor
Scenography design
KAN200
installation
Speaker power handling
Max power
Impedance
Frequency range
SPL 1W/1mt
Maximum SPL
Horizontal
Vertical
Type
Frequency
Full-range
Connectors
Wiring
Dimensions
Weight
KAN200 specs
Acoustics
(AES)
150 W
(1)
300 W
64 Ω
150 Hz – 18 KHz +/- 6dB
(3)
86 dB
96 dB continuous – 102 dB peak
Coverage
160°
10°
Crossover
External cross over required
150Hz, 24dB/oct suggested minimum
Transducers
8 x 1” Neodymium cone driver with 0.75” voice coil
Power Audio Input
2 x 4-pin speakon (1 female, 1 male)
1+ 1- (signal IN & LINK) 2+ 2- (Through)
Recommended Ampliers
KA40 for up to 16 units each channel and KMT12 for up to 8 units
Certication
55
IP
Physical
201.9 x 5.6 x 3.53 cm (79.5” x 2.2” x 1.4”)
1.4 Kg (3.09 lbs)
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed
by EIAJ standard;
2. With dedicated preset;
3. Mesured @8 m, then scaled @1 m;
4. Mesured with musical signal;
New materials and design are introduced into existing products without previous notice. Present
systems may differ in some respects from those presented in this catalogue.
(2)
(4)
Loading...