K-array KAN200 User Manual

Download

KAN200 - KAN200+ Ver. 2.0

KAN200 - KAN200+

USER GUIDE

English

KAN200 - KAN200+ Ver. 2.0

Table of ConTenTs

sYMbols ................................................................................ 3

1. InTRoDUCTIon ..................................................................... 4

2. KeY feaTURes ...................................................................... 4

4. paCKage ConTenTs .............................................................. 4

3. applICaTIons ....................................................................... 4

5. safeTY InfoRMaTIon ............................................................ 5

6. UnpaCKIng ......................................................................... 6

7. ph Y s I C a l ............................................................................. 6

8. ConneCToRs anD seT Up ...................................................... 7

9. wIRIng ................................................................................ 8

10. CoVeR age .......................................................................... 9

11. aCCessoRIes ......................................................................10

12. seRVICe ............................................................................ 11

13. TeChnICal speCIfICaTIons .................................................. 12

14. DeClaRaTIon of ConfoRMITY ............................................. 13

KAN200 - KAN200+ Ver. 2.0

sYMbols

K-array declares that this device is in compliance with applicable CE standards and regulations. Before putting the device into operation, please observe the respective country-specific regulations!

WEEE Please dispose of this product at the end of its operational lifetime by bringing

it to your local collection point or recycling center for such equipment.

This symbol alerts the user to the presence of recommendations about the product’s use and maintenance.

Warning! Dangerous voltages: RISK of electric shock. Terminals marked with this symbol are HAZARDOUS LIVE and the external wiring connected to these terminals requires installation by a qualified professional or the use of ready-made leads or cords.

This symbol alerts the user to the presence of recommendations about product’s use and maintenance.

This device complies with Restriction of Hazardous Substances Directive.

KAN200 - KAN200+ Ver. 2.0

1. InTRoDUCTIon

The K-array Anakonda KAN200 is a truly revolutionary speaker module born to meet the needs of

places where few had dared to go up to now. It is designed to be a problem solver in situations where

a traditional speaker box can’t be used but where good intelligibility, ultra-reliability and a sleek design

are required.

The KAN200 is the perfect fit for any distributed sound application. Its dedicated presets allow KAN200s

to serve as a flexible PA system - either standalone or combined with K-array subwoofers. Its lightness

and flexibility help it to be easily integrated in existing structures.

Each KAN200 module is 2m (6.6 ft) long. Up to 32 modules can be interconnected to create a continuous

sound line, 64m (210 ft) in length. Integrated male and female speakon NL4 connectors hide all

connections inside the “body” of the speaker, which creates an elegant, seamless line.

The new KAN200+ is even more powerful, featuring double the number of transducers. Up to 16

modules can be interconnected to create a continuous sound line, 32m (105 ft) in length.

Each KAN200/KAN200+ includes 2 fabric socks, one black and one white, which can be used to cover

and protect the speaker from foreign objects such as dust , and to change the system’s color to suit the

application. Wall brackets are included in the package to make the installation as easy and as fast as

possible.

All the components of the Anakonda KAN200/KAN200+ are designed by the K-array R&D department

and made in Italy under the K-array quality control system.

2. KeY feaTURes 3. applICaTIons

• Flexible 2mt chassis

• Integrated NL4 connectors

• High impedance for long lines

• IP55 for outdoor installations

• Front fill

• Outdoor installations

• Theme parks

• Indoor and outdoor Scenography design

4. paCKage ConTenTs

4 x

KAN200 - KAN200+ Ver. 2.0

5. safeTY InfoRMaTIon

Read these instructions - Keep these instructions - Heed all warnings

Warning. Failure to follow these safety instructions could result in injury or damage to the device or other property.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions.

• Keep this instructions.

• Heed all warnings.

• Follow all instructions and keep all warnings.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with

the apparatus.

• When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

• Avoiding hearing damage. Professional loudspeakers are capable of producing extremely high sound

levels and should be used carefully. Never stand close to loudspeakers driven at high volume. Set the volume to a safe level. You can adapt over time to a higher volume of sound that may sound normal but can be damaging to your hearing. Hearing loss get worse every time you’re exposed to a sound level of 90 dB or over for an extended period of time. If you experience ringing in your ears or muffled speech, stop listening and have your hearing checked. The louder the volume, the less time is required before your hearing could be affected.

• Choking Hazards. This device contains small parts, which may present a choking hazard to small children. Keep the device and its accessories away from small children.

• Do not make repairs yourself. Never attempt to disassemble, repair or modify the system yourself.

Disassembling the unit may cause damage that is not covered under the warranty. The device contains no user-serviceable parts. Repairs should only be performed by factory trained service personnel.

• Sound distortion. Do not operate speakers for an extended period of time with sound distortion. This is an indication of malfunction, which in turn can generate heat and result in a fire.

• Carrying, handling and installing the device. The device contains sensitive components. Do not drop,

disassemble, open, crush, bend, deform, puncture, shred, incinerate, paint, or insert foreign objects into it. If your device has been dropped or damaged unplug the power cable immediately.

• Set up. Set up your device on a stable retaining horizontal surface. If combined or mechanically

connected with other products, always verify the stability of the resulted system. Install the unit only in a location that can structurally support the weight of the unit, far away from people who can interfere with the stability of the system. Assure that the wind does not interfere with the system’s stability, taking extra securities like chains, weights, ropes or any other certified anchoring systems. Doing otherwise may result in the unit falling down, causing personal injury or property damage or even death. The system should only be suspended by qualified personnel following safe rigging practices. Secure fixings to the building structure are vital. To clarify any doubt you may have, seek help from architects, structural engineers or other specialists.

KAN200 - KAN200+ Ver. 2.0

6. UnpaCKIng

Each K-array speaker is built to the highest standard and thoroughly inspected before leaving the factory. Upon arrival, carefully inspect the shipping carton, then examine and test your new amplifier. If you find any damage, immediately notify the shipping company. Only the consignee may institute a claim procedure regarding the system’s electronic equipment.

7. p h Y s I C a l

2019 mm

56 mm

M5 n°2 Holes

98.8 mm

31 mm

2000 mm

M5 n°2 Holes

80 mm

56 mm

35 mm

27.5 mm

Weight

KAN200: 1.4 kg (3.1 lbs)

KAN200+: 1.9 kg (4.2 lbs)

KAN200 - KAN200+ Ver. 2.0

8. ConneCToRs anD seT Up

Parallel Input. NL4 Four-pins female Speakon connector

Parallel Output/Link. NL4 Four-pins male Speakon connector

Connector Secure Lock. Pull it back and turn the connector to unplug it.

KAN200 - KAN200+ Ver. 2.0

9. wIRIng

Audio power signal on pins 1+/1- of the NL4 Speakon connectors is fed into the speaker, while the signal on pins 2+/2- passes through from one socket to the other. Thus, the signal can pass through multiple modules without additional external cabling. You can connect a series of up to 16 KAN200 (32 m) or up to 8 KAN200+ (16m) to a single channel of a 4Ω amplifie r.

Signal on pins 2+/2- can then be easily fed into another series of KAN200/KAN200+ modules with the insertion of a K-ANLINK accessory that twists the pins 1+/1- and 2+/2-. This way you can create a continuos line of up to 32 KAN200 (64m) or up to 16 KAN200+ (32m)

Standard Wiring

KA84 AMP

OUT A (1+/1-)

KA84 AMP

OUT A (1+/1-)

OUT A (2+/2-)

OUT B (1+/1-)

KAN200

Up to 16 KAN200 / 8 KAN200+

KAN200

Up to 16 KAN200 / 8 KAN200+

KAN200 KAN200

.....

Wiring with the K-ANLINK Accessory

KAN200

KAN200 KAN200 KAN200

.....

KAN200 KAN200

Up to 32 KAN200 / 16 KAN200+

.....

K-anlInK

KAN200 KAN200

.....

Amplifier Max KAN200 per channel Max KAN200+ per channel

KA84 16 units (32 meters) 8 units (16 meters)

KMT12 8 units (16 meters) 4 units (8 meters)

KMT18 8 units (16 meters) 4 units (8 meters)

KAN200 - KAN200+ Ver. 2.0

10. CoVeR age

160°

30°

10°

KAN200 - KAN200+ Ver. 2.0

11. aCCessoRIes

Socks

Wall bracket

Multi purpose bracket

K-ANLINK (not included)

When the K-ANLINK is used to connect a KAN200 /KAN200+ to another KAN200/KAN200+ it integrates perfectly to make a uniform-looking series of speakers. See pag. 8 for wiring details.

KAN200 - KAN200+ Ver. 2.0

12. seRVICe

To obtain service:

1) Contact the official K-array distributor in your country. Your local distributor will direct you to the

appropriate service center.

2) If you are calling for service, please have the serial number(s) of the unit(s) available for reference.

Ask for Customer Service, and be prepared to describe the problem clearly and completely.

3) If the problem cannot be resolved over the phone, you may be required to send the unit in for service. In this instance, you will be provided with an RA (Return Authorization) number which should be included on all shipping documents and correspondence regarding the repair. Shipping charges are the responsibility of the purchaser.

Any attempt to modify or replace components of the device will invalidate your warranty. Service must be performed by an authorized K-array service center.

Cleaning: Use only a soft, dry cloth to clean the housing. Do not use any solvents, chemicals, or cleaning solutions containing alcohol, ammonia, or abrasives. Do not use any sprays near the product or allow liquids to spill into any openings.

KAN200 - KAN200+ Ver. 2.0

13. TeChnICal speCIfICaTIons

KAN200 KAN200+

ACOUSTICS

Power handling 150 W

Max Power 300 W

(AES)

(1)

Impedance 64 Ω

Frequency range 150 Hz – 18 kHz +/-6dB

SPL 1W/1mt 86 dB

(3)

(2)

Maximum SPL 96 dB (cont.) – 102 dB (peak)

COVERAGE

Horizontal 160°

Vertical 10°

CROSSOVER

Type External crossover required

Frequency 50 Hz 24dB/oct suggested minimum

TRANSDUCERS

Type

8 x 1” Neodymium cone driver with 0.75” voice coil

POWER AUDIO IN/OUT

Connectors 2 x 4-pin Speakon (1 female, 1 male)

Wiring 1+ 1- (signal IN & LINK) 2+ 2- (Through)

RECOMMENDED AMPLIFIERS

Type KMT12, KMT18, KA84

CERTIFICATION

IP 55

PHYSICAL

Dimensions

201.9 x 5.6 x 3.5 cm (79.5” x 2.2” x 1.4”)

Weight 1.4 kg (3.1 lbs)

ACOUSTICS

Power handling 300 W

Max Power 600 W

(AES)

(1)

Impedance 32 Ω

Frequency range 150 Hz – 18 kHz +/-6dB

SPL 1W/1mt 86 dB

(4)

Maximum SPL 102 dB (cont.) – 108 dB (peak)

(3)

(2)

(4)

COVERAGE

Horizontal 160°

Vertical 10°

CROSSOVER

Type External crossover required

Frequency 50 Hz 24dB/oct suggested minimum

TRANSDUCERS

Type

16 x 1” Neodymium cone driver with 0.75” voice coil

POWER AUDIO IN/OUT

Connectors 2 x 4-pin Speakon (1 female, 1 male)

Wiring 1+ 1- (signal IN & LINK) 2+ 2- (Through)

RECOMMENDED AMPLIFIERS

Type KMT12, KMT18, KA84

CERTIFICATION

IP 55

PHYSICAL

Dimensions

201.9 x 5.6 x 3.5 cm (79.5” x 2.2” x 1.4”)

Weight 1.9 kg (4.2 lbs)

Notes fo r data

1. Maximum RMS applicable power for a music al signal. The reference sig nal is the one proposed by EIA J standard;

2. With dedicated pres et;

3. Mesured @ 8 m, then scaled @1 m;

4. Mesured with musical signal;

New material s and design ar e introduce d into existing product s without pr evious notice. Present s ystems may dif fer in some respects from those presented in this cat alogue.

The content s of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.

KAN200 - KAN200+ Ver. 2.0

K-array KAN200 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

sYMbols

1. InTRoDUCTIon

2. KeY feaTURes 3. applICaTIons

4. paCKage ConTenTs

5. safeTY InfoRMaTIon

6. UnpaCKIng

7. p h Y s I C a l

8. ConneCToRs anD seT Up

9. wIRIng

10. CoVeR age

11. aCCessoRIes

12. seRVICe

13. TeChnICal speCIfICaTIons

14. DeClaRaTIon of ConfoRMITY