K-array Azimut Series, Azimut-KAMUT2L1, Azimut-KAMUT2L14, Azimut-KAMUT2V25, Azimut-KAMUT2L Reference Manual

Azimut

Minimalist design,
maximum connectivity

Azimut-KAMUT2L1

Azimut-KAMUT2L14

Azimut-KAMUT2V25

REFERENCE GUIDE

Complete audio solution
with plug and play capabilities
Bluetooth connectivity
Dedicated app via Wi-Fi

Azimut-KAMUT2L

Azimut

Reference Guide

Index

UNPACKING 6

HARDWARE CONFIGURATION 7

Azimut-KAMUT2L1 7

Azimut-KAMUT2V25 7

Azimut-KAMUT2L14 7

Azimut-KAMUT2L 7

REMOTE CONTROL 8

CONNECTING 8

Azimut Discovery app 8

Bluetooth pairing 8

AZIMUT CONTROL INTERFACE 9

Main menu 10

Network & Bluetooth 10

Local streaming 11

Advanced settings 12

SYSTEM UPDATE 12

UPDATE VIA USB 12

HARDWARE CONTROL SETUP 13

OUTPUT CONFIGURATION 14

ROUTING 14

TECHNICAL SPECIFICATIONS 15

REGULATORY INFORMATION 17

EC DECLARATION OF CONFORMITY 17

WEEE DIRECTIVE 17

Azimut

Reference Guide

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions - Keep these instructions

Heed all warnings

Warning. Failure to follow these safety instructions

could result in fire, shock or other injury or damage to

the device or other property.

• Read these instructions.

• Keep this instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.

• Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.

• Only use attachments/accessories specified by the
manufacturer.

• Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.

• When a cart is used, use caution when moving the
cart/apparatus combination to avoid injur y from tip­ov er.

• Unplug this apparatus during lightning storms or when
unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing
is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

SYMBOLS

K-array declares that this device is in compliance
with applicable CE standards and regulations. Before
putting the device into operation, please obser ve the
respective country-specific regulations!

WEEE
Please dispose of this product at the end of its
operational lifetime by bringing it to your local collection
point or recycling center for such equipment.

This symbol alerts the user to the presence of
recommendations about the product ’s use and
maintenance.

The lighting flash with arrowhead symbol within an
equilateral triangle is intended to aler t the user to the
presence of uninsulated, dangerous voltage within
the product enclosure that may be of magnitude to
constitute a risk of electrical shock.

This device complies with Restriction of Hazardous
Substances Directive.

4

Azimut

Reference Guide

Thank you for choosing a K-array product!
To ensure proper operation, please read this owner’s manual
and safety instruction carefully before using the product.
After reading this manual, be sure to keep it for future
reference.Should you have any questions about your new
device please contact K-array customare service at

[e-mail] or contact the ocial K-array distributor

in your country.

Your new speaker has Spotify Connect built in.
You need a Spotify account to take advantage of Spotify Connect.
Spotify Connect lets you control the music playing on your
device, using the Spotify app on your mobile, tablet or PC.
Listening is seamless. You can take calls, play games, even
switch your phone off – all without interrupting the music.
Learn more at spotify.com/connect
The Spotify software is subject to third party licenses found
here: www.spotify.com/connect/third-party-licenses

Listen out loud with Spotify Connect

1. Connect your Azimut-KA02 to your local network;

2. Open up the Spotify app on your phone, tablet or
laptop using the same network;

3. Play a song and select Devices Available;

4. Select your Azimut-KA02 and start listening.

5

Azimut

Reference Guide

A. Lyzard-KZ1
B. Lyzard-KZ14
C. Vyper-KV25
D. Truffle-KTR24
E. Truffle-KTR25
F. Truffle-KTR26
G. Rumble-KU44-2
H. Kommander-KA02

5

4

3

A

B

C

UNPACKING

D

Each K-array amplifier is built to the highest standard and
thoroughly inspected before leaving the factory. Upon arrival,
carefully inspect the shipping carton, then examine and test
your new amplifier. If you find any damage, immediately notify

E

2

the shipping company.Check that the following parts are
supplied with the product.

Azimut-KAMUT2L1

1x Kommander-KA02 amplifier
1x Truffle-KTR24 subwoofer
2x Lyzard-KZ1 ultra miniaturized

F

loudspeaker w/cable
1x K-Audioctrl remote control w/cable
1x Subwoofer cable
1x Power supply w/power cord
2x Line input connectors
(Phoenix MC 1.5/3-G-3.81)
3x Self adhesive magnet strip
3x Double-sided bonding strip

G

Azimut-KAMUT2V25

1x Kommander-KA02 amplifier
1x Truffle-KTR26 subwoofer
2x Vyper-KV25 line-array element
1x K-Audioctrl remote control w/cable
1x Subwoofer cable
2x Loudspeaker cables
1x Power supply w/power cord
2x Line input connectors
(Phoenix MC 1.5/3-G-3.81)
4x Pairs of 3M Dual Lock pads
4x Wall mount brackets

1

Azimut-KAMUT2L14

1x Kommander-KA02 amplifier
1x Truffle-KTR25 subwoofer
2x Lyzard-KZ14 ultra miniaturized
line-array element w/cable
1x K-Audioctrl remote control w/cable
1x Subwoofer cable
1x Power supply w/power cord
2x Line input connectors
(Phoenix MC 1.5/3-G-3.81)
3x Self adhesive magnet strip
3x Double-sided bonding strip

Azimut-KAMUT2L

1x Kommander-KA02 amplifier
1x Rumble-KU44-2 subwoofer
2x Lyzard-KZ14 ultra miniaturized
line-array element w/cable
1x K-Audioctrl remote control w/cable
1x Subwoofer cable
1x Power supply w/power cord
2x Line input connectors
(Phoenix MC 1.5/3-G-3.81)
3x Self adhesive magnet strip
3x Double-sided bonding strip

6 7 8 9 10

H

14 13 11121516

1. Subwoofer cable

2. Vyper-KV25 cable*

3. Brackets for Vyper-KV25

4. Balanced connection plugs

5. Wired loudspeaker plugs

6. Ethernet Port

7. USB ports

8. Optical input

9. 3,5 mm jack analog input

6

10. Balanced analog inputs

*

11. Remote Control connector

12. Output connections

13. Wi-Fi reset switch

14. GPIO port

15. DC inlet

16. Power switch

* Available for Azimut-K AMU T2V25 only.

HARDWARE CONFIGURATION

Azimut-KAMUT2L1

Azimut

Reference Guide

Azimut-KAMUT2L14

Output Subwoofer

Subwoofer connector

Output RIGHT

Output LEFT

! !

Available optional: Lyzard-KZ1, Truffle-KTR24
Up to 4 Lyzard-K Z1 per channel can be
connected in parallel.
Up to 2 Truffle-KTR24 per channel can be
connected in parallel.

Azimut-KAMUT2V25

Output Subwoofer

Output LEFT

Output RIGHT

Output Subwoofer

Subwoofer
connector

Available optional: Lyzard-KZ14, Truffle-KTR25
Up to 4 Lyzard-K Z1 per channel can be
connected in parallel.
Up to 2 Truffle-KTR25 per channel can be
connected in parallel.

Azimut-KAMUT2L

Output Subwoofer

Output RIGHT

Output LEFT

Output RIGHT

Output LEFT

Subwoofer
connector

Subwoofer
connector

!

Available optional: Lyzard-KZ14
Up to 4 Lyzard-K Z14 per channel can be
connected in parallel.

7

Azimut

Reference Guide

REMOTE CONTROL

Status LED

Power button

Volume UP

Volume DOWN

Pairing LED

Bluetooth switch

AUDIO CONTROL

Standby Power On

Status LED Pulse Blinking Solid White

Bluetooth
switch

Keep pressed for 10 s
for pairing

The Azimut system can be completely controlled by any
mobile device or desktop PC via the Azimut Control Interface.
We strongly suggest to implement the Azimut system within
your network environment and then access its features
relying on your wireless access point or wired devices.

Bluetooth Connectivity
is dedicated to direct
streaming from any
mobile device supporting
the Bluetooth 4.1
protocol.

CONNECTING

Name and password for accessing the Azimut Control
Interface are collected on a label underneath the Kommander-

KA02 amplifier.

D e fa ul t I P: 19 2.16 8.10.1
Default password: 12345678

Azimut Discovery app

Download the Azimut Discovery App for your device:

Connect the Azimut to your Wi-Fi access point via a dedicated
Ethernet cable.

Use the Azimut Discovery app to discover and direct access
the Azimut Control Interface within your Wi-Fi network.

Bluetooth pairing

Keep pressed the Bluetooth switch on the wired remote for
10s. When the blue LED starts blinking you can pair your
device with the Azimut.

Bluetooth pairing can be achieved by the Network &
Bluetooth section in the Azimuth Control Interface as well.
See the Network & Bluetooth for more details.

8

AZIMUT CONTROL INTERFACE

Main menu

Azimut

Reference Guide

Audio sources

Blue buttons
highlight active
inputs

Player controls

Audio controls
change
according to the
player selected

USB tracks list

Startup options

9

Azimut

Reference Guide

Main menu

Remote control

The default view with Audio sources
and Players selections.

Audio Setup

User equalizer and level tuning.

Local Streaming

Manage a group of devices by a single
Azimut system.

Network & Bluetooth

Modify network and Bluetooth settings.

Network & Bluetooth

Pairing

Click this button
to set the system
in Pairing mode
waiting for a
connection.

Edit Password

Click this button
to set a new
password for the
local Wi-Fi of the
Azimut system

Edit Ethernet

Click this button
to change
Ethernet settings
(i.e. a static IP
address and
a different
netmask)

Advanced

Set advanced features.

10

Local streaming

Master

This device will
stream audio to
any Slave system
in the net work

Free

This device
will playback
audio from
local sources
or internet
independently.

Slave

This device will
playback the
same audio
played by the
Master Azimut
system

Azimut

Reference Guide

This feature allows to Manage a group of Kommander KA02
Azimut amplfiers by a single Azimut system.

Preliminary setup:

• Connect all the Kommander KA02 to the same network;

• Set a unique name on each device in order to ease its detection and

setup (see Advanced section for details);

• Select one Azimut system as Master device on the network: this device

will stream its music to any other Azimut system marked as Slave.

Local streaming setup:

1. Connect to one Azimut system and access its Azimut Control Inter face;

2. Browse the Main menu and click on Local streaming: the view will

show the complete list of the Azimut systems within the network of the
Azimut you are connected to;

3. For each listed Azimut system you can:

• set it as Master: this device will stream the music to any other Slave
Azimut system in the network.

WARNING: only one Master device is allowed within the network

• set it as Slave: this device will playback the music streamed by the
Master;

• toggle the standby mode in order to wake up or turn off the system
(resume or stop playback accordingly);

• set the playback volume.

By accessing the Azimut Control Interface of an Azimut
system within the network it is possible to override the Local
streaming setting and free the device.

11

Azimut

Reference Guide

Advanced settings

SYSTEM UPDATE

The Kommander-KA02 Azimut amplifier can be easily
updated in the Advanced settings view.

1. Connect to the Azimut system and access its Azimut Control Inter face;

2. Browse the Main menu and click on Advanced;

3. E xpand the Version Info section: if the Azimut system is connected to
Internet, the system will look for updates on K-array website. When a
new firmware version is available, the Download button lights on.

4. Click on the Download button and wait for the firmware update file to
be saved on-board.

5. When the Install button lights on: click on the Install button to start the
system update.

Do not reboot the system until the alert message appears.

During firmware update, please don’t modify any parameter

of the device via the web interface.

UPDATE VIA USB

6. Download the firmware packages form the Azimut support webpage in
www.k-array.com;

7. Format the USB memor y stick with FAT16 or FAT32 file system;

8. Create a folder named “update” (case sensitive) in the root of the USB
memory stick;

9. Copy the firmware packages marked as “update” into the update
folder: files must follow the correct naming pattern, and both .package
and .package.sha256 files must be present into the folder:

|-update\
|-root fs-update-1.0.5.0.package
|-root fs-update-1.0.5.0.package.sha 256

10. Connect the USB memory to the Azimut;

11. Connect to the Azimut system and access its A zimut Control Interface;

12. Browse the Main menu and click on Advanced;

13. Expand the Version Info section;

14. Click on the Install via USB button.

12

HARDWARE CONTROL SETUP

The Kommander-KA02 Azimut amplifier unit provides a
General Purpose Input connector designed to connect up
to four external normally open (NO) switches* to be set as a
further remote user customizable controls.
In order to bind the remote control to an Azimut operating
functionality (actions) follow these step:

1. Connect the external NO switch to the ground (GND) terminal and to
one of the four available terminals of the flying plug;

2. Plug the flying plug to the H ardware Control por t on theKommander-
KA02 back panel;

3. Open the A zimut user interface, click on the Main Menu icon and
select Advanced;

4. Scroll dow n and find theHa rdware Control section;

5. Find the control with the number corresponding to the hardware control
terminal where you plugged the remote switch and set the proper
function;

6. Enable the remote control;

7. Click on Save setup to make the settings effective.

Azimut

Reference Guide

4

3

2

1

*external normally open (NO) switches
are not provided with the A zimut
system.

Action Parameter

mute/unmute n/a

set volume number of decibels (dB)

Increase volume n/a

Decrease volume n/a

play/pause n/a

play/pause Spotify n/a

13

ma x: 24
min: -200

Azimut

Reference Guide

OUTPUT CONFIGURATION

This view allows to modify the loudspeaker assignment to the
Kommander-KA02 amplifier output channels.

These configuration shall be set by authorized operators.

WARNING: wrong loudspeaker selection

may seriously damage connected loudspeakers.

ROUTING

This view allows to modify the LEFT and RIGHT input
channel assignment to the Kommander-KA02 amplifier
output channels.

14

Azimut

Reference Guide

TECHNICAL SPECIFICATIONS

Lyzard-KZ1 Lyzard-K Z14 Vyper-KV25

Typ e Point source Line array Line array

Rated Power 3.5 W 15 W 75 W

Frequency Response 500 Hz – 18 kHz (-10 dB)

Maximum SPL 86 dB (peak)

2

1

500 Hz – 18 kHz (-10 dB)

98 dB (peak)

2

Coverage V. 140° | H. 140° V. 40° | H. 140° V. 25° | H. 120°

Transducers

0,5” neodymium magnet
driver with 0,5” voice coil

4x 0,5” neodymium magnet drivers
with 0,5” voice coil

Colors Black, white, custom RAL

Finishes Brushed and polished stainless steel, 24K gold finishes

Material Aluminium

Dimensions
(WxHxD)

22 x 37 x 10,8 mm
(0.87 x 1.46 x 0.42 in)

22 x 100 x 10,8 mm
(0.87 x 3.9 x 0.42 in)

Weight 0.021 kg (0.046 lb) 0,059 kg (0.130 lb) 0,4 kg (0.88 lb)

IP Rating IP54

Impedance 16 Ω 16 Ω 8 Ω / 32 Ω selectable

1

250 Hz – 18 kHz with dedicated preset.

2

Maximum SPL is calculated using crest factor 4 (12dB) from sensitivity scaled @1m and power handling specifications, exclusive of power compression.

1

150 Hz – 18 kHz (-10 dB)

108 dB (peak)

2

4x 1” neodymium magnet
drivers with 0,75” voice coil

39,5 x 260 x 21,5 mm
(1.6 x 10.24 x 0.8 in)

15

Azimut

Reference Guide

Truffle-KTR24 Truffle-KTR25 Truffle-KTR26 Rumble-KU44-2

Typ e Point source Point source Point source Point source

Rated Power 60 W 80 W 100 W 120 W

Frequency Response 45 Hz – 150 Hz (-6 dB) 45 Hz – 150 Hz (-6 dB) 45 Hz – 150 Hz (-6 dB) 50 Hz – 150 Hz (-6 dB)

Maximum SPL

112 dB (peak)

1

115 dB (peak)

Coverage Omni Omni Omni Omni

Transducers

4" woofer + passive
radiator

5.25" woofer + passive
radiator

Colors Black Black, white, Custom RAL

Finishes Powder Matte Gold, Polished, Brushed

Material Aluminium Stainless Steel

Dimensions
(WxHxD)

120 x 116 x 190 mm
(4.7 x 4.6 x 7.48 in)

151,5 x 145 x 250 mm
(5.96 x 5.71 x 9.84 in)

Weight 1,5 kg (3.31 lb) 2,5 kg (5.51 lb) 3,5 kg (7.72 lb) 5,9 kg (13.0 lb)

IP Rating IP54

Impedance 4 Ω 4 Ω 2 Ω 2 Ω

1

Maximum SPL is calculated using crest factor 4 (12dB) from sensitivity scaled @1m and power handling specifications, exclusive of power compression.

1

120 dB (peak)

6.5" woofer + passive
radiator

181,5 x 176 x 322 mm
(7.15 x 6.93 x 12.68 in)

1

116 dB (peak)

1

2 x 4” neodymium magnet
2 x 4” passive transducer

116 x 500 x 101 mm
(4.6 x 19.7 x 4.0 in)

Kommander-KA02

Typ e 4-channel Class D audio amplifier

Rated Power 4x 50W @ 4Ω

Frequency Response 20 Hz – 20 kHz (±1 dB)

Connectivity

Bluetooth 4.1 Low Energy,
Wi-Fi, Ethernet

Control Dedicated Azimut Control Interface / wired Remote Control

Operating range Dedicated AC/DC powe r adapter 100-240V ~ AC, 50 -60 Hz input / 24 V, 4 A DC output

Colors and Finishes Black / Powder Mat te

Material Aluminium

Dimensions (WxHxD) 144 x 46 x 144 mm (5.6 x 1.8 x 5.6 in)

Weight 0,5 kg (11 lb)

Impedance minimum 4 Ω

16

2x Phoenix Connectors (bal)

3.5 mm Jack Stereo (unbal)
Toslink Optical Connector

REGULATORY INFORMATION

Azimut

Reference Guide

EC DECLARATION OF CONFORMITY

Manufacturer:

K-array surl
via Paolina Romagnoli 17
50038 - Scarperia e San Piero a Sieve
Firenze - Italy

We declare that under our sole responsibility the products:
Model Names: KA02
Intended use: Professional Audio Amplifier
Is in conformity with the provisions of the following EC Directives,
including all amendments, and with national legislation implementing
these directives:

• 2006/95/EC Low Voltage Directive

• 2004/108/EC Electromagnetic Compatibility Directive

• 2011/65/UE RoHs II Directive

The following ar monized standards are applied:

• EN 5 510 3 -1:20 09

• EN 5 510 3 -2:2 0 0 9

• EN 61000-3-2:2006 /A1:2009 /A2: 2009

• EN 61000-3-3:2013

• EN 61000-3-11:2000

Scarperia e San Piero a Sieve
20 March 2019

Franco Spataro
Technical Manager

WEEE DIRECTIVE

If the time arises to throw away your product, please
recycle all the components possible.
This symbol indicates that when the end-user wishes to
discard this product, it must be sent to separate collection
facilities for recovery and recycling. By separating this
product from other household-type waste, the volume of
waste sent to incinerators o r land-fills will be reduced and
natural resources will thus be conser ved.
The Waste Electrical and Electronic Equipment Directive (WEEE Directive)
aims to minimise the impact of electrical and electronic goods on the
environment. K-array surl comply with the Directive 2002/96/EC and
2003/108/EC of the European Parliament on waste electrical finance the
cost of treatment and recovery of electronic equipment (WEEE) in order to
reduce the amount of WEEE that is being disposed of in land-fill site.
All of our products are marked with the WEEE symbol; this indicates that this
product must NOT be disposed of with other waste. Instead it is the user’s
responsibility to dispose of their waste electrical and electronic equipment
by handing it over to an approved reprocessor, or by returning it to K-array
surl for reprocessing. For more information about
where you can send your waste equipment for recycling, please contact
K-array surl or one of your local distributors.

17

18

19

Designed and Made in Italy

K-ARR AY surl

Via P. Romagnoli 17 | 50038 Scarperia e San Piero - Firenze - Italy

ph [phone] | [e-mail]

www.k-array.com