Page 1
A - Headboard - 1 pc
Please read all instructions before beginning assembly
Pre Assembly :
.
.
on each part and check with below part list to ensure we have all components.
Save all packing materials until assembly is complete to avoid accidentally discarding smaller parts
.
or hardware.
BED
Parts Included :
B - Footboard - 1 pc F - Center Rail - 1 pc
ASSEMBLING INSTRUCTION
Page 1 of 4
C - Side Rail - 2 pcs
Place all parts on a carpet or foam in shipping box. Find the letter (A,B,C,...) or the number (1,2,3,...).
G - Extra Leg - 1 pc
E - Metal Frame - 4 pcs
D - Metal Frame - 2 pcs
Page 2
Page 2 of 4
Hardware Enclosed :
aa - JCBC bolts - 16 pcs bb - Allen Key - 1 pc
cc - Hexagonal bolts - 8 pcs dd - Wrench - 1 pc
1. Lay all components (A, B, C,...) onto clean smooth surface as carpet or cardboard.
Assembly Instructions :
2. Attach Side Rail (C) to the Metal Frame (D) and (E), secured by JCBC bolts (aa).
Tighten by using Allen Key (bb)
C
C
D
D
E
E
E
E
DE
C
D
aa
bb
bb
aa
as not to misplace components.
Please carefully note all letter or number at component that indicates homing destination
Page 3
Page 3 of 4
3. Attach Headboard (A) to the Side Rail (C).
(see below diagram).
AA
C
Please hang the brackets to the Hexagonal bolts (aa) and leave bolts a little bit loosen
A
cc
C
dd
C
A
cc
dd
4. Attach Footboard (B) to the Side Rail (C).
4.1. Position the Side Rail (C) aligned / straight with the Footboard (B) and the Headboard (A).
4.2. Make sure the bracket is aligned with the Hexagonal bolts (aa).
4.3. Hang the bracket to the Hexagonal bolts (aa), leave bolts a little bit loosen.
Headboard (A)
Footboard (B)
Side Rail (C)
Floor
Page 4
Page 4 of 4
6. Attach Extra Leg (G) to the Center Rail (F). See diagram below
G
F
G
F
C
B
C
B
dd
cc
5. Make sure to tighten all bolts by using Wrench (dd).
F
A
Care Instructions :
Hardware may loosen over time.
Re-tighten if necessary.
Dust with soft dry cloth.
Avoid abrasive cleaners.
For indoor use only.
7. Attach Center Rail (F) with Extra Leg (G) to bed. Please DO NOT attach Center Rail (F) without
first securing Extra Leg (G) to the whole body otherwise Center Rail (F) can break.
ASSEMBLY IS COMPLETED
Periodically check to make sure
use a mild-cleaner spray
all components are tight.
If a cleaner is needed,
and blot with an absorbent cloth.
Loading...