Karma 850 User Manual

SERVICE & INSTALLATION MANUAL

PORTION CONTROL BULK CREAM DISPENSER MODEL 850

THIS REFRIGERATED DISPENSER IS FOR USE.WITH COFFEE
CREAMER PACKED IN BAGS OR BIB’S

TABLE OF CONTENTS

Specifications……………….……….cover page

Warranty…………………………….cover page

Start-up Procedure…………………..page 2

Loading Procedure…………………..page 2

Programming Procedure…………….page 3

Spare Parts Listing…………………..page 3

Wiring Diagram……………………...page 4

Dimensions: 9 .5” W x 29 .4”H x 21”D



Shipping wt: 70 lbs



Electrical: 115v/60hz 8 amps



Refrigerant: CFC Free R134A



WARRANTY: 1 Year Parts and Labor Limited
Warranty. An additional 2 Year Parts Warranty
on the compressor. Contact Karma for details.

People and Products You Can Depend On

Producers of dependable dispensing equipment

for the food and beverage industries.

KARMA dispensers are covered by one or more U.S. patents and applications and corresponding foreign patents and applications.

P.O. BOX 433
WATERTOWN, WI 53094 USA
920-261-1424
800-558-9565
FAX [phone]
INTERNET WEB PAGE
Http://www.karma-inc.com
E-mail [e-mail]

Start-up Procedure:

1. Plug dispenser power cord into 115v 60hz receptacle.

2. Compre ssor will start in approximately 2 minutes. (Not e: There is a 2
minute delay programm ed into the control as a safety feature )

3. In approximately 20 minutes the product compartment will be cooled
down to the proper temperature. The control display shows the
compartment temp erature at all times during normal operation.

4. Dispenser is now ready to load with creamer .

LOADING PROCEDURE

STEP 1:

Remove Bag Carrier from
dispenser and lay Bag in
Carrier as shown

STEP 2:

Set Bag Carrier in dispenser
and feed tubing thru the top
slot of the pump.

STEP 3:

Turn the pump rollers
Counter Clockwise slightly so

that tubing can exit thru

the

bottom slot of the pump

STEP 4:

Push tubing into channel
then cut off all but 1/2 inch

the excess tubing

of

Page 2