Karel OP48 User Manual

www.karel.com.tr

09/2007

Operator's Console

Console d'opérateur

Consola del Operador

OP

48

Mini User's Guide

Guide Résumé de I'utilisateur

Guía de Operación

OP

48 H

MINI USERS GUIDE

Introduction

This guide provides an overall reference on
the KAREL OP48 Console & its handsfree
version, KAREL OP48-H Console.
This guide is prepared with the assumption
that the OP48(-H) user is familiar with
the Easy To Use Owners Guide of the
telephone system.

1

OP48 TTKK - REV AAB 12/09/2007

KAREL reserves the right to make changes with
the product features specified in this document
without notice, for the purpose of development
and improvement. The products may actually
possess different characteristics from that of the
information specified herein, according to their
software and hardware versions.

MINI USERS GUIDE

Getting To Know Your Console

Figure 1 - OP48-H

1. Busy Display Panel

2. 8-Character Display

3. Function Keys

4. 3x4 Numeric Keypad

5. Handsfree Key

6. Handsfree Volume Adjuster

7. Handsfree LED

8. Ring Level Adjuster

1. Busy Display Panel

The Busy Display Panel shows the status of the
extensions, lines and some of the system fea­tures by means of their corresponding LEDs (Red
lamps). The extension LEDs display the last 2
digits of the physical numbers of the extensions
(even if the extension numbers are changed by
Flexible Numbering facility).

Figure 2 - Busy Display Panel

Extension Status (LEDs 11-50)

ON : The extension is busy.
OFF : The extension is idle.
BLINKING
(slow) : The extension phone is ringing.
BLINKING
(fast) : The extension is calling the operator.

Line Status (LEDs 01-12)

ON : The line is busy.
OFF : The line is idle.
BLINKING
(slow) : There is a call coming from the line.
BLINKING
(fast) : A call is parked on the line.

2

3

MINI USERS GUIDE

2. 8- Character Display

The 8-Character Display shows:
 The time when the console is idle,
 The numbers as they are dialed,
 The calling line or extension number when the
console is ringing, and,
 Certain characters (listed below) to indicate the
current state of the console or call activation.
t:
You are talking to an extension or line.
r:
There is a recall from the line.
Au:
Activated Auto-Dial is realized.
Cb:
Activated Call Back is realized.
Fo:
The extension you are calling has activated Follow
Me.
Pb:
The next extension in the PBX Group of the called
extension is ringing.
Er:
Erroneous operation.
Lb:
There is a problem in the communication
between the system and the console. (*)
tE:
There is a problem in the communication
between the system and the console. (*)

(*): Consult your System Supervisor or installer.

4

5