Karel LT200, LT200-H User Manual
1
Introduction
This guide provides an overall reference on the KAREL LT200 Feature Phones &
their handsfree versions, KAREL LT200-H Feature Phones.
This guide is divided into the following three main parts:
1) In part one (pg 2), the structure of the feature phones, and brief information
about the physical parts, are presented.
2) In part two (pg 5), the main details of the
Setting Mode
are given.
3) In part three (pg 7), the programming and use of
Memory Keys
are explained in
point form.
This guide is prepared with the assumption that the LT200(-H) user is familiar with
the “Easy To Use Owner's Guide” of the DS200 telephone system.
2
Getting To Know Your Feature Phone
Figure 1
1. 2x16 Character LCD
2. Memory Keys
3. Function Keys
4. 3x4 Numeric Keypad
5. Handsfree Key
6. Handsfree Volume Adjuster
7. Handsfree LED
8. Ring Level Adjuster
3
1. LCD Display
The 2x16 character LCD display lists the following types of messages:
-
Status Messages: These messages give information about the status of the
system features and the activated features on your Feature Phone. They are
displayed when your Feature Phone is idle.
-
Ringing Messages: These messages display information about the calling
party, when your telephone rings.
-
Call Handling Messages: These messages display the options that you may
use while making a call or during an established call. You may navigate
between the available options using the Next (>) key and y ou may select any of
these options pressing the Check (
9999
) key.
-
Call Charging Messages: These messages display the number of metering
pulses received, the total cost of these metering pulses and the currency unit.
-
Setting Mode Messages: These messages guide you through the steps in the
Setting Mode
.
2. Memory Keys
These 10 dual-function keys each with a dedicated LED (Red lamp) enables
one-touch activation of some system features. Refer to pg 7 for details.
3. Function Keys
Flash : - When pressed during an ongoing call, it holds the call.
-
When pressed while there is a call on hold, it retrieves the call.
Transfer :
-
When pressed while there is a call on hold, it makes a
Call Transfer
.
-
When pressed during an ongoing conversation, it terminates the call.
H/R : - When pressed during an external call, it parks the call.
-
When pressed while receiving internal dial tone, it retrieves the parked
call.
< :
-
Scrolls to the previous LCD message. The character “<“ appearing at
the beginning of a message on the LCD suggests that you may
scroll through the previous options using this key.
> :
-
Scrolls to the next LCD message. The character “>“ appearing at the
end of a message on the LCD suggests that you may scroll
through the next options using this key.
9
: - Activates the displayed action/function (1 beep).
-
Enters the
Setting Mode
(2 beeps). Refer to pg 6 for details.
Loading...