Kareem
ST5801GB Series Outdoor AP/Bridge User Manual
2
Contents
Chapter 1: Product Overview
..............................
3
Introduction
..........................................................
3
Installation
............................................................
3
Package Contents
..................................................
4
Chapter 2: System Configuration
........................
5
System Setup
.........................................................
5
System Setup > Basic Setup
.................................
5
System Setup > Network Setup
...........................
6
Wireless
.................................................................
7
Wireless > Radio Setup
........................................
7
Wireless > WLAN Setup
.......................................
7
Wireless > Wireless Security
...............................
8
Wireless > WMM Setup
........................................
9
Wireless > Bandwidth Control
..........................
10
Administration
...................................................
10
Administration > Management
.........................
10
Administration > Login Password
....................
11
Administration > SNMP Setup
...........................
11
Utility
...................................................................
12
Utility > Ping
.......................................................
12
Utility > RSSI Calculator
.....................................
12
Utility > Fresnel Zone
.........................................
12
Utility > Antenna Alignment Tool
.....................
12
Utility > Site Survey
............................................
13
Status
...................................................................
13
Status > System Information
.............................
13
Status > System Status
.......................................
13
Status > Connecting Nodes Information
...........
14
Status > Connecting AP Information
.................
14
Appendix 1: Specifications
.................................
15
Hardware Specification
.....................................
15
Software Specification
.......................................
18
3
Chapter 1: Product Overview
Introduction
The ST5801GB SERIES OUTDOOR AP/BRIDGE series
are enterprise and carrier-grade 802.11N Outdoor
Wireless Access Point which offers customer a robust
and high performing solution for PTP/PTMP/Hotzone
applications in both license-free 2.4GHz and 5GHz
bands.
The ST5801GB03R is the most ideal candidate for
Service Providers looking to deliver carrier-grade
wireless services to multiple market segments such
as campuses, hospitality, healthcare, warehousing
and wider metropolitan area deployments.
Designed to meet customer needs in a broad range
of industries, the ST5801GB SERIES OUTDOOR
AP/BRIDGE offer the following benefits :
Flexible wireless backbone deployment options
Multiple radio interfaces were integrated by
FonSee’s core data switching technology inside the
ST5801GB SERIES OUTDOOR AP/BRIDGE series. Each
radio interface can be configured independently to
meet different wireless connectivity purposes. With
the fast data switching between multiple radio
interfaces, the backbone throughput will remain in a
high level even after several relays between APs.
High-performance wireless backbone
With the next generation 802.11N MIMO technology,
the ST5801GB SERIES OUTDOOR AP/BRIDGE offer
data link rate up to 300Mbps in each single radio
interface. Short Guard Interval and Frames
Aggregation methodology configurations improve
the efficient of backbone usage.
Secure and efficient client connectivity
The nimble QoS (Quality of Service) configuration
provides flexible management of user’s access
bandwidth of wireless connectivity. Perfect
integrated with central RADIUS server and data
encryption technique, the ST5801GB SERIES
OUTDOOR AP/BRIDGE series provide a secure
wireless connectivity for each client device.
ST5801GB SERIES OUTDOOR AP/BRIDGE
Category
Model Radio Spec.
Radio
Amount
ST5801GB01R
Dual-Band 2x2 MIMO
Normal Power
1
ST5801GB02R
Dual-Band 2x2 MIMO
Normal Power
2
ST5801GB03R
Dual-Band 2x2 MIMO
Normal Power
3
ST5801GB01RHDual-Band 2x2 MIMO
High Power
1
ST5801GB02RHDual-Band 2x2 MIMO
High Power
2
ST5801GB03RHDual-Band 2x2 MIMO
High Power
3
Installation
The ST5801GB SERIES OUTDOOR AP/BRIDGE series
product has up to 3 dual-band 2X2 MIMO radio
interfaces. Each 2X2 MIMO radio interface will has 2
N-type connectors come out on the waterproof
housing. We strongly recommend that check
antenna attachment to match your configuration
before the installation.
4
A PoE is the power supply of the ST5801GB SERIES
OUTDOOR AP/BRIDGE series. Please connect the
ETH1+Power port to the included PoE injector by
Ethernet cable.
Connect another data port on the PoE injector to
your LAN switch or PC, if necessary.
Package Contents
● ST5801GB SERIES OUTDOOR AP/BRIDGE
802.11A/G/N Outdoor Wireless Bridge
● PoE Power Injector
● Power Adapter
● Mounting Kit & Screw
● CD: User Manual
5
Chapter 2: System Configuration
Access the Browser-Based Utility
To access the system web user’s interface, launch the
web browser on your computer, and enter the
device IP address in the Address field of the web
browser. (The factory default IP address is
192.168.1.1.) Then press Enter.
A login screen will appear. Go to the login page by
Click the “Home > Login” in sub-menu. Login ID and
password is required before access the system web
user’s interface. The default administrator’s ID is
admin and password is admin. For normal user’s
login ID is user and password is user. Configuration
will be not available for user account.
The configuration page was vertically divided into
right and left part. Items in the left part show the
concurrent configuration corresponds to the items in
right part.
Please do remember to click the Apply button on the
very bottom of every page to make your
configuration changes effected; otherwise the
changes you just made will be ignored once you
leave the current page. You can also click the Cancel
button to regret the changes.
System Setup
A System Setup includes device related elements,
such as system time and IP setting.
System Setup > Basic Setup
Language The ST5801GB SERIES OUTDOOR
AP/BRIDGE series WEB GUI is designed to support
English language in display. Users can choose the
proper language in language list.
Device Name User would like to give a name for
identifying a particular outdoor access point in here.
System Date User would like to set the date
manually in this item.
System Time User would like to set the time
manually in this item.
Time Synchronization Time synchronization setting
will decide the duration to next time synchronization.
When any NTP server is available in network, user
can enable the NTP and system will automatically
synchronize system time with NTP server.
GMT Time zone Set a Greenwich Mean Time setup
6
for time synchronization.
Time Server User can insert an available IP address
of NTP server in Internet for time synchronization.
System Setup > Network Setup
IP Setup
IP Assignment System allows you to assign the
device IP address dynamically from existing DHCP
server or set a static IP address manually.
IP Address Once Static IP was selected, the IP
Address field will allow you to set the bridge device
IP address manually. This IP address of the bridge is
used as the base for all of your local network
settings.
Subnet Mask This is the subnet mask address for
your bridge device. Set the IP subnet mask manually.
Default Gateway Set the default gateway IP address
manually.
DNS 1 & 2 The Domain Name System (DNS) is how
the Internet translates domain or website names
into Internet addresses or URLs. Your ISP will provide
you with at least one DNS Server IP Address. If you
wish to use another, enter that IP Address in DNS 2
field.
Spanning Tree Protocol
STP The Spanning Tree Protocol (STP) is a network
protocol that ensures a loop-free topology for any
bridged Ethernet local area network. The basic
function of STP is to prevent bridge loops and
ensuing broadcast radiation. Spanning tree also
allows a network design to include spare (redundant)
links to provide automatic backup paths if an active
link fails, without the danger of bridge loops, or the
need for manual enabling/disabling of these backup
links.
Ethernet Link Speed
Link The link speed of Ethernet port can be changed
manually into 10/100 Half/Full duplex.
DHCP Server Setting
The ST5801GB SERIES OUTDOOR AP/BRIDGE series
can be configured as a DHCP server for a LAN
network. Once the DHCP Server is chose as on, the
DHCP server setting elements will spread out on the
page.
DHCP Server Allows you to enable or disable the
DHCP server function in system.
IP Start / End The IP Start and End Address specify
the range of addresses assigned by your device when
it functions as a DHCP server.
Primary & Secondary DNS Set the primary and
Loading...