
Stone and Facade 
Cleaner 
              High pressure cleaner for stones and facades 
Properties: 
• powerful cleaning agent for high pressure machines 
• removes oil, grease, soot, dust, algae, mould and emission soiling 
• corrosion protection 
• applicable on aluminium surfaces 
• pH- value approx. 7 
• clear yellow liquid with fresh odour 
Fields of application: 
• facade cleaning      • buildings    • stone 
• concrete walls      • footpath    • coatings 
• gardening tools      • patio    • metal 
• agricultural machinery    • balcony     
Processing: 
           pre-dilution    dosing  temperature 
          (RM + water)      pre-dilution 
• high pressure cleaning façade  pure       5%     cold 
• high pressure (machinery)      pure      1-5%     cold 
Economy: 
1 l Stone and Facade Cleaner is sufficient for the cleaning of approx. 20 m², dosage 1% at 
the high-pressure appliance, medium soiled area. 
Handling: 
Fill the Stone- and Façade-Cleaner into the tank of the high pressure machine or put the 
suction pipe into the RM-bottle. 
Remarks: 
• do not allow to dry cleaning agent solution on the surface 
• do not apply on hot, coated (varnished) surfaces 
• in case of unsensitive surfaces use the DIRT BLASTER nozzle 
1/2
RM 555/8, 01/2006 

Stone and Facade    
Cleaner 
Attention: 
S 2 Keep out of the reach of children 
S 23 Do not breathe aerosol 
Further information: 
• Material safety data sheet 
Process: 
Object: e.g. Façade 
• Fill the Stone- and Façade-Cleaner into the tank of the high pressure machine or put the   
suction pipe into the RM-bottle. 
• dosage approx. 5% at the high pressure cleaner 
• spray with low pressure, let react for approx. 3 minutes 
• rinse with clear water 
Alfred Kärcher GmbH & Co. KG 
Alfred-Kärcher-Str. 28-40 
D-71364 Winnenden 
Phone +49 (7195) 14-0 
Fax +49 (71 95) 14 - 2212 
http://www.karcher.com 
2/2
RM 555/8, 01/2006