Kärcher B 60 Quick Start Manual

QUICKSTART

5.964-272.0 10/12

Warning

These are only brief instructions! Please read and comply with these instructions prior to using or servicing your
appliance.

The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers
for the operator and other persons.

Start up

1

A B A Unplug the charger from the mains.

B Wind the mains cable around the cable hold-

ers.

2

A B A Open the lock of the fresh water reservoir.

Fill fresh water (maximum 60 °C) until the
lower edge of the filling nozzle.

Close the lock of the fresh water reservoir.
or
B Connect the hose to the automatic filling

system and open the water supply

(max. 60 °C, max. 5 bars).

3

A B Model with dosing equipment "Dose"

A Place the detergent bottle into the holder.

Close the bottle lid.

Insert the suction hose of the dosaging

equipment into the bottle.

Model without dosing equipment "Dose"

B Add the detergent to the fresh water

reservoir.

Operation

1

A B Starting the machine

A Turn the program selection switch to "OFF".
B Plug in the Intelligent Key.

B 60

QUICKSTART

5.964-272.0 10/12

2

A

D

B

E

C Driving

A Turn the programme selector switch to

position 1 "Transport mode".
B First select the driving speed at the rotary

knob.

Drive forward

C Press the driving lever to the front.

Stop the machine: Release driving lever.

Reverse drive

D Press the driving lever to the rear.

Stop the machine: Release driving lever.

Stop

E Release driving lever.

3

A Adjusting the brush contact pressure

A Arrest the lever in the desired position.

Upper position: higher contact pressure

Lower position: reduced contact pressure

4

Cleaning Programs

A Eco!efficiency mode

Wet clean the floor and vacuum up dirt water.
B Normal mode

Wet clean the floor and vacuum up dirt water.
C Intense mode

Wet clean the floor and allow the detergent to

react.
D Vacuum mode

Vacuum the wastewater.
E Polishing mode

Polishing the floor without the application of

liquid.

5

A Setting the water quantity

A Adjust the water quantity using the regulating

button according to the dirt on the floor cover-

ing.

6

A Info button

Use the Info button to select the menu items and
do the settings.
A Turning the button to the right/left scrolls

through the menus forward/ backward.

The selected setting gets accepted by

pressing the button.

Operation