• Ensure you are using your Car Dash Cam within your
countries’ road laws. Please make sure you are familiar
with your local road legislation before use.
• Avoid leaving your Dash Cam in direct sunlight for extended
periods of time in an unventilated space.
• Please set time and date before you use this device to
record.
• The notiications given by the Car Dash Cam are
suggestions only, please drive to the actual conditions.
• The results of GPS positioning are only for reference. The
Car Dash Cam will lose GPS positioning abilities when
signal is blocked (e.g. driving through tunnels, enclosed car
parks).
• GPS positioning accuracy may vary depending on weather
and surroundings such as dense cities, tunnels, or forests.
GPS satellite signals cannot pass through most solid
materials. Tinted windows may also affect the GPS signal.
• The values displayed in this system, such as speed,
position, and the distance warning, may be affected by the
surrounding environment.
• The system is to be used only for non-commercial use,
within the limits permitted by the relevant laws.
• Avoid using the Car Dash Cam near any devices that emit
radio interference (e.g. Microwave Ovens).
• It is considered normal operation for the Car Dash Cam to
get warm during use.
1.2 PRODUCT INFORMATION
For latest manual and product updates please visit our website
at www.kapturecam.com.au or www.kapturecam.co.nz.
2.0 INTRODUCTION
Thank you for purchasing a Kapture Dash Cam. Please read
through instructions before attempting to install or use this
product.
This User guide is designed to assist with the day to day
operation of the KPT-1442.
Before attempting to use or install your Kapture KPT-1442,
please ensure you have read and understood all of the safety
notes below.
• Avoid leaving your KPT-1442 in direct sunlight for extended
periods of time in an unventilated space.
• Do not expose your KPT-1442 to liquids, excessive dusty
conditions or temperatures exceeding 60°C.
• Only use the included cables to power and charge the
KPT-1442.
• Please do not attempt to adjust the KPT-1442 position or
settings whilst you are operating your vehicle.
• Please clean the windshield thoroughly removing all dust
and dirt particles before ixing the adhesive mount.
• Since the mount sticks onto the windshield using a 3M
adhesive, please ensure that the position of the camera is
best located to capture the maximum viewing area.
• We suggest you to power-on the dash camera and test the
playback image on screen irst prior to removing the 3M
tape for installation.
6
• Only remove the 3M tape when you are satisied with the
dash camera placement and image position are delivering
the best possible image and view of the road ahead.
• Ensure you are using your KPT-1442 within your countries’
road laws. Please make sure you are familiar with your local
road legislation before use.
2.1 PACKAGE CONTENTS
KPT-1442
Dash Cam
Car
Charger
Electrostatic
Film x 2
Dash Cam
3M Mount
1080P FHD
Rear Camera
Spare 3M
Adhesive
User
Guide
7
2.2 PRODUCT OVERVIEW
10
17
9
8
135
24
1. Menu/Mode Button
2. Up Button
3. Lock Recording Button
4. Down Button
5. Rec/Ok Button
6. ON/OFF Power Button
7. Micro SD Card slot*
8. HDMI Port
9. Mini USB Power socket
11
14
16
15
7
6
1213
10. Reset
11. Microphone
12. Speaker
13. Lens
14. Slot for Mount
15. Cam/Rear Camera In*
16. LCD Screen
17. Recording Indicator
LED
8
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.