Kapsys Kapten Mobility User's Guide

KAPTEN MOBILITY

USER’S GUIDE

Revision 5

Introduction to Kapten Mobility

1.1 Introduction

Kapten Mobility is primarily a navigation device designed for visually impaired people using GPS satellite-positioning system. Kapten Mobility is fully accessible thanks to its accessible interface, which implements speech recognition and voice synthesizer.

Kapten Mobility is more than a simple GPS navigator. It will make your journey easier and will facilitate your mobility thanks to its content rich features, such as geo localization, navigation, and map discovery.

Moreover, Kapten will allow you to memorize your preferred points of interest in order to guide you there whenever you want. These points of interest are called K-Tag's.

In addition, Kapten Mobility incorporates two multimedia functions: An MP3 music player and a Daisy format audio book reader.

1.2 Disclaimer

Please listen carefully to this message.

The Kapten Mobility, using GPS system, is dedicated for pedestrians, but can also be used in the car.

During a navigation session with Kapten Mobility, please respect the warnings described herein.

Whatever your travel mode, navigation instructions given by Kapten should not exempt you from respecting rules and regulations and behave responsibly.

Your attention should be focused primarily on your path. Stay alert and attentive during your trip and respect other users, which may be pedestrians, cyclists, motorcyclists and motorists.

Finally, use common sense before obeying a navigation instruction from Kapten Mobility. Carefully observe the signals and the geometry of the sidewalks and streets. If you are unable to take the path indicated by Kapten Mobility, it will automatically recalculate your route with your new position.

Please note that Kapten Mobility embeds GPS technology. The accuracy of your position is determined by the quality of the GPS signal, which depends heavily on your environment, where you are, how you carry your device, and on digital mapping. Thus we cannot guarantee the accuracy of the navigation instructions.

Thank you for respecting these guidelines.

1.3 Various technologies used in Kapten Mobility

It includes several advanced technologies:

Geo localized digital map,

Speaker independent speech recognition,

Voice synthesizer with text to speech capability,

Multi-transport navigation engine including pedestrian, public transport and car navigation,

Geo localized public transport database,

MP3 player,

And, Audio book reader.

The following paragraphs describe the way the above technologies are used in Kapten Mobility.

GPS

GPS, which stands for Global Positioning System, is the most commonly used positioning system.

Kapten Mobility’s navigation engine combines GPS satellite information and digital map data in order to guide you between two geographical points or addresses.

Depending on navigation mode, Kapten Mobility’s navigation engine applies different algorithms and generates appropriate navigation announcements for guidance.

Voice recognition

Speech recognition allows user to dictate by voice commands to Kapten Mobility. Such commands are used for:

Selecting a function,

Navigating user interface menus,

Entering a destination address,

Interacting with Kapten Mobility.

User shall dictate such entries by using either Kapten Mobility’s microphone or microphone of headphones.

Voice synthesizer

Voice synthesis is a technique to create human voice from any text. It is also called TEXT TO SPEECH technology.

The combination of speech recognition and voice synthesis creates a new level of user friendly interaction with Kapten Mobility’s interface.

1.4 MP3 Player

MP3 is an audio format for storing sound or music, without audible loss of quality to the human ear.

Kapten Mobility uses an MP3 player to play music files stored in its storage space.

Audio book reader

Kapten Mobility uses an audio book reader compatible with Daisy standards using HTML format or MP3 stored in Kapten Mobility’s memory space.

1.5 Box content

The Kapten Mobility box consists of:

The Kapten Mobility

A USB cable that allows you to connect Kapten Mobility to a computer in order to download multimedia content and update its firmware

A wall charger that allows you to charge the battery

A necklace that allows you to attach and carry your Kapten Mobility. Attach it either at the top or at bottom of the product

A headset with two headphones, a microphone and a push-to-talk button

1.6 Getting started

Charging the battery

Before using Kapten for the first time, you need to charge Kapten Mobility’s battery.

To do this, connect the USB cable to your product and plug the other end to the wall charger contained in the box.

Charge your Kapten Mobility for 7 hours before you start using the product.

Start Kapten Mobility

To start Kapten Mobility, press the on button, located at the top right corner of the front panel, for 3 seconds.. An audible sound will indicate that the product is starting. . The product will be

operational after about 30 seconds.

GPS signal acquisition

The Kapten Mobility uses GPS technology as a positioning system. Therefore it must be used outdoors in an open area with good visibility of the sky. Avoid covering the device for best GPS signal reception. Note that the preferred (but not limited to) way of carrying the product is around your neck using the necklace.

At first use, Kapten Mobility can take 5 to 15 minutes to find its position. Once the position is found you should hear the following message: "GPS signal OK”

1.7 Embedded User Help

The current document is made available to you through the audio book reader.

Moreover, at any time, you can use the contextual help of Kapten Mobility by performing a long press the play button, or using the voice command "I need help."

Interact with Kapten Mobility

This part explains how to interact with Kapten Mobility through its interfaces using either the keypad or speech recognition technology.

It introduces the voice menu concept and explains different possibilities when using Kapten Mobility.

1.8 Keypad

For the rest of this document, "keypad" refers to a set of buttons on the front panel of the Kapten Mobility. All the buttons have tactile symbols. The keypad buttons trigger different actions depending on whether pressing a button is short or long. A long press means at least holding the button for 3 seconds. These actions will be explained later in this document.

The keypad is divided into three zones.

"On Off" button

Navigation buttons

Function buttons

« On off » Button

The “On Off” button is located at the top right of the front panel, and is symbolized by a small circle.

A long press on this button will turn Kapten Mobility on or off.

A short press allows you to access the setup menu of Kapten Mobility.

Navigation buttons

5 navigation buttons are located at the upper part of the front panel. There is one central button and four surrounding buttons. The central button is marked with a raised circle.

These buttons are dedicated to menu navigation for Kapten Mobility. The buttons may have different actions depending on the feature being used. These differences will be underlined for each feature in the following paragraphs.

The "K" button or validation button, located in the center of navigation buttons, is symbolized by the Kapsys logo,

The “Play, Pause" button, positioned at 12 o’clock, is symbolized by a triangle and a vertical bar,

The "Stop" button, positioned at 6 o’clock, is symbolized by a square,

The "Previous" button, positioned at 9 o’clock, is symbolized by a left arrow symbol,

The "Next" button, positioned at 3 o’clock, is symbolized by a right arrow symbol.

Note: A long press on the “K” button lists all Point of Interest around your current location.

Function buttons

The function keypad includes five dedicated buttons at the lower part of the front panel. They are spread over two rows separated by a horizontal bar. Above the bar, is a row of three buttons, and below, a row of two buttons.

These five buttons activate various features of Kapten Mobility.

The "Navigation" button is located at the left of the top row and is symbolized by a diamond. This button allows you to access the navigation function of Kapten Mobility

The "Where am I?" or "Free navigation" button, is located at the center of the top row and is symbolized by a triangle. A short press on this button gives you your current position. A long press will activate the free navigation function.

The "K Tag" button is located at the right of the top row and is symbolized by a cross. This button allows you to manage your K Tag’s.

The "MP3" button is located at the left of the bottom row and is symbolized by a circle. This button allows you to access the MP3 player.

The "Audio Book" button is Located at the right of the bottom row and is symbolized by a star. This button allows you to access the audio book player.

1.9 Other buttons

Volume control buttons

Located on the left edge of the device, both up and down buttons allow you respectively increase or decrease the volume of Kapten Mobility.

A long press on volume up and down buttons (3 seconds) allows you respectively increase or decrease the speech speed. You can also set the speech speed into Kapten Mobility Parameters (see section 7).

Voice control button

Located on the right edge, the push-to-talk button, also called Automatic Speech Recognition button or ASR, allows you to activate the voice recognition of Kapten Mobility and interact by voice.

Reset button

Located on the lower edge, this little button allows you to reset Kapten Mobility in case of problems.

1.10 Connections

Kapten Mobility has three connectors:

The Mini USB connector, located on the bottom edge: The USB connector allows you to recharge the battery and also connect your device to a computer.

The Micro SD connector for memory cards, located on the right edge: The additional micro SD card can increase the memory capacity of Kapten Mobility for multimedia content.

The Audio jack connector, located on the top edge of Kapten Mobility: This allows you to connect the headphones as an accessory.

1.11 Headphones

The headphones provided with Kapten Mobility features an integrated microphone and a push-to-talk button. When the headphones are connected, they replace the microphone, the loudspeaker and push-to-talk button on the Kapten Mobility unit.

1.12 Interaction through menus

To activate one of the Kapten Mobility’s features, you start by pressing one of the function buttons such as Navigation, K-Tag, MP3 or Audio Book. The corresponding is then activated. Each menu is composed of a list of items. When activated, Kapten Mobility will announce the menu title and the first item of the menu by speech.

There are two different ways to navigate menus; either through the navigation buttons or by automatic voice recognition..

Interact with navigation buttons

Each menu is a list of voice synthesized items you can select with the “K” button while browsing by using the “Next” and “Previous” buttons as described herein after.

In a menu, you can use any of the following buttons:

Voice Control or ASR button Allows to enter a command by voice

corresponding to one of the menu items

Short press on « Next » button Goes to the next item on the list

Short press on « Previous » button Goes to the previous item on the list

Short press on « K » Button Selects the current item on the list

Long press on « Previous » button Returns to the previous menu

Short press on « Stop » button Exits the current function

Short press on « Play, Pause » button Repeats the menu title and current item on the

list

Long press on « Play, Pause » button Activates contextual help

Interact by voice

You can activate each menu item using speech recognition through a set number of voice commands.

A voice command is a command entered by the using the microphone in response to the voice menu as described above. It also says that user 'dictates his/her choice'.

Before entering your command, press the ASR button, wait for the beep and then speak your choice such as an item from the active menu.

A voice command is pronounced aloud from the integrated microphone or microphone of your headphones.

To increase the efficiency of the speech recognition by Kapten Mobility, we recommend that you:

Speak into the microphone with a clear voice,

Keep the microphone about 10 centimeters or four inches from your mouth,

Speak after the beep,

And preferably in a quiet environment.

1.13 Interacting with Kapten Mobility using keywords

The keywords are phrases or simple words you can dictate to Kapten Mobility. They allow you to inquire about things like battery status or ask Kapten Mobility to perform certain actions such as change the navigation mode.

Certain keywords, as given in the following paragraph, can be entered anytime independently whether or not a function is activated, others can be used only within the active function. Such keywords will be discussed within dedicated paragraph for functions.

To interact with Kapten Mobility through keywords:

Short press on the ASR key either on the Kapten Mobility or on the headphones

Speak the keyword after the beep

Generic keywords

The following keywords can be used anytime regardless of the current active function.

I need help! Activates the contextual help.

Keyword Indicates available keywords.

GPS Activates navigation menu.

Activate free navigation Activates free navigation.

Stop free navigation Stops the free navigation mode.

MP3 Activates MP3 menu.

Audio book Activates audio book menu.

Parameters Activates the parameters menu.

K TAG Activates the K Tag menu.

Where am I? Indicates your current position.

POI around Indicates Point of interests of any category around your

current position.

Repeat Repeats the last message announced.

GPS Signal Indicates the quality of GPS signal.

Battery level? Indicates the battery level in percentages.

What time is it? Indicates time of the day.

Volume down Decrease the audio level.

Volume up Increase the audio level.

Current position Indicates latitude and longitude in degrees, minutes and

seconds and the altitude.

Speed limit Indicates the speed limit of the road on which you are.

Current speed Indicates the speed at which you are traveling.

« Navigation » related keywords

The following keywords are only valid when Kapten is in Navigation mode.

Next Instruction Indicates the next navigation instruction.

Last Instruction Repeats the last navigation instruction.

Current destination Indicates the current destination.

Switch to public transport Activates public transport road book in pedestrian mode.

Resume navigation Exits from road book mode and resumes navigation to

destination.

Current Navigation mode Indicates the current navigation mode.

Switch to Pedestrian mode Switches to pedestrian navigation mode without re-

entering the destination address.

Switch to Car mode Switches to car navigation mode without re-entering the

destination address.

Remaining distance Indicates the remaining distance until destination point

Arrival time Indicates the remaining time until destination point

Roadbook Activates road book during a navigation

Stop navigation Stops the current navigation

« MP3 » related keywords

The following keywords are only valid when using the MP3 Player.

What am I listening to? Indicates information about the current track

Next title Advances to the next track

Previous title Returns to the previous track

Play all tracks Plays all tracks of your music stored in Kapten Mobility

Start random mode Starts playing tracks randomly

Stop random mode Stops playing tracks randomly

Stop music Stops MP3 player

« Audio book» related keywords

The following keywords are only valid when using the audio book reader.

What am I listening to? Indicates the title of the current audio book

Book information Indicates information about the current audio book

Next Section Advances to the next section

Previous Section Returns to the previous section

Book duration Indicates the remaining time until the end of the book

Stop reading Stops audio book

1.14 Alphanumerical character entry or virtual keypad

Description

Kapten Mobility implements an alphanumeric input mode available only for entering a city name, a street name, a street number, a public transport station name, a postal code, ZIP code or geographical coordinates for K-Tag. This input method is useful when speech recognition is not satisfactory.

To select a city for example, simply enter the first letters of the city using the virtual keypad then exit the entry mode with long press on the “K” button. Kapten Mobility then provides you a list of city names containing these characters. Please note, more characters you enter, shorter the list will be.

How to use virtual keypad

The following buttons are used to enter alphanumerical words:

Push to talk button Allows you to enter an alphanumerical

character by voice

Long press on « K » button Enters or exits from alphanumerical entry

mode

Short press on « Next» button Indicates the next character

Short press on « Previous» button Indicates the previous character

Long press on « Next» button Toggles between letters and numbers

Short press on « K » button Select the current character

Long press on « Previous» button Discard the last entered character

Short press on « Play, Pause » button Spells the entered characters

Short press on « Stop» button Exits the menu

Long press on « Play, Pause » button Activates the contextual help

1.15 Features activation

A feature can be activated

Either by using voice command to activate the function you want (GPS, MP3, KTAG or Audio Book)

Or by pressing a feature button.

To activate feature, the following buttons can be used:

Push to talk button Allow you to enter your choice by voice

Short press on « K » button Repeats the last message played

Long press on “K” button Searches all Points of interest around your

location

Short press on “Navigation” button Activates navigation menu

Long press on “Navigation” button Activates the navigation menu with default

navigation mode (pedestrian or car)

Short press on “Free Nav” button Indicates your current location

Long Press on “Free Nav” button Enables or disables free navigation mode

Short Press on “K-Tag” button Activates K-Tag menu

Long press on “K-Tag” button Create a K-Tag with your current location

Short press on “MP3” button Activate MP3 menu

Long press on “MP3” button Start MP3 player and resumes last played

song

Short press on “Audio Book” button Activates audio book menu

Long press on “Audio Book” button Starts the Audio book and resumes last played

book

Long press on “Play, Pause” button Activates contextual help

Long press on “Volume up” Increases the speech speed

Long press on “Volume down” Decreases the speech speed

Navigation function

1.16 Before you start navigation with Kapten Mobility

Please listen carefully to this message.

The Kapten Mobility navigation device, using GPS system, is dedicated for pedestrians, but can also be used in the car.

During a navigation session with Kapten Mobility, we invite you to respect carefully warnings described herein.

Whatever your travel mode, navigation instructions given by Kapten Mobility should not exempt you from respecting strictly the rules and regulations and adapt a responsible behavior.

Your attention should be focused primarily on your path. Stay alert and attentive during your trip and respect others, whether they be pedestrians, cyclists, motorcyclists or motorists.

Thank you for respecting these guidelines.

1.17 Launching GPS navigation

The GPS navigation function can be activated:

By pressing the "Navigation" button located at the left of the top row on the function keypad. It is symbolized by a diamond.

Or by speaking the « GPS » keyword using the ASR button.

Note that a long press on the "Navigation" button is a shortcut allowing you to directly enter a destination in the default navigation mode as defined per the settings.

1.18 Different navigation modes

You can select your navigation mode from the following list:

« Pedestrian Navigation »: navigation suitable for pedestrian use. It includes public transportation when available;

« Car Navigation »: navigation suitable for in-car use;

« Map Discovery »: allow you to read your Kapten Mobility’s digital map and virtually movecross intersections, while giving you a description of each of the intersections;

« Public Transport »: allow you to list the road book between two public stations such as subway, tramway or train;

« Track »: allow you to record a route, name it, and then play later.

« Direct Guidance »: gives you direct guidance to your destination regardless of your navigation mode by announcing distance and directions. To control the navigation mode, the following buttons can be used:

Push to talk button Allows you to enter your choice by voice

Short press on « Next» button Indicates the next item of the list

Short press on « Previous» button Indicates the previous item of the list

Short press on « K » button Selects the current item on the list

Long press on « Previous» button Returns to the previous menu

Short press on « Stop» button Exits the menu

Short press on « Play, Pause » button Repeats the title of the menu and current item

on the list

Long press on « Play, Pause » button Activates the contextual help

1.19 Pedestrian navigation

In pedestrian navigation mode your journey to your destination will be optimized accordingly.

You can modify certain parameters of route calculations in the paragraph called « Pedestrian Navigation Parameters » at the end of this document.

If any public transportation network can be used during your journey, Kapten Mobility will prompt you. If you accept to use public transport then the route calculation will include public transportation if available.

1.20 Car navigation

In car navigation mode your journey to destination is optimized for in-car use only.

You can modify certain parameters of route calculations in the paragraph called « Car Navigation Parameters » at the end of this document.

1.21 Selecting the destination

Either enter your destination by voice, or select an item from the following list using the keypad:

« New address»: Defines a destination address,

« New address by ZIP code»: Defines a destination point by entering a ZIP code,

« Last destinations»: Allows you to select one of your last recorded destinations,

« Favorites »: Allows you to select one of your favorite destinations from your favorites list (Please note that all KTAG created with “Favorite” attribute can be retrieved from Favorites list),

« Contacts »: Allows you to select your destination from your Contact list;

« KTAG »: Allows you to select your destination from your KTAG list;

« Point of Interests»: Allows you to select your destination from your Point of Interest list provided by Map Provider;

« Itinerary»: Calculates and allows you to brows the Road book between starting and destination points;

To enter a destination, the following buttons can be used:

Push to talk button Allows you to enter your choice from the list by

voice

Short press on « Next» button Indicates the next item of the list

Short press on « Previous» button Indicates the previous item of the list

Short press on « K » button Selects the current item on the list

Long press on « Previous» button Returns to the previous menu

Short press on « Stop» button Exits the menu

Short press on « Play, Pause » button Repeats the title of the menu and current item

on the list

Long press on « Play, Pause » button Activates the contextual help

Navigate to « New Address »

The various stages of entering a new address are as follow:

Select country map (available only with multiple country configuration)

Select state or region (if needed. Depends on country)

Select city name.

Select street name.

And select street number, or a cross road.

Country Map selection

Enter the country of your destination by voice, or select from the list of maps available in your Kapten Mobility using the keypad.

To choose a country map, the following buttons can be used:

Push to talk button Allows you to enter the country name by voice

Short press on « Next» button Indicates the next item of the list

Short press on « Previous» button Indicates the previous item of the list

Short press on « K » button Selects the current item on the list

Long press on « Previous» button Returns to the previous menu

Short press on « Stop» button Exits the menu

Short press on « Play, Pause » button Repeats the title of the menu and current item

on the list

Long press on « Play, Pause » button Activates the contextual help

State or Region name selection

Either enter the state or region name of your destination by voice or select the state or region name from the list using the keypad.

To choose the state or region, the following buttons can be used:

Push to talk button Allows you to enter the state or region name

by voice

Short press on « Next» button Indicates the next item of the list

Short press on « Previous» button Indicates the previous item of the list

Short press on « K » button Selects the current item on the list

Long press on « Previous» button Returns to the previous menu. Or returns to

the country map selection in case of multiple country configuration.

Long press on « Next» button Automatically selects the state or region

corresponding to your current position.

Short press on « Stop» button Exits the menu

Short press on « Play, Pause » button Repeats the title of the menu and current item

on the list

Long press on « Play, Pause » button Activates the contextual help

City name selection

Either enter the city name of your destination by voice, or select city name from the list using the keypad.

By default, the proposed list of cities consists of the city of your current position and the last selected cities.

To choose the city name, the following buttons can be used:

Push to talk button Allows you to enter the city name by voice

Long press on « K » button Switches to alphanumerical entry mode

Short press on « Next» button Indicates the next item of the list

Short press on « Previous» button Indicates the previous item of the list

Short press on « K » button Selects the current item on the list

Long press on « Previous» button Returns to the previous menu. Or returns to

country map selection in case of multiple country configuration.

Long press on « Next» button Selects the city corresponding to your current

position.

Short press on « Stop» button Exits the menu

Short press on « Play, Pause » button Repeats the title of the menu and current item

on the list

Long press on « Play, Pause » button Activates the contextual help

Street name selection

Either enter the street name of your destination by voice, or select street name from the list using the keypad.

By default, the proposed list of street names consists of last street name selected in the city and « city center » item.

To improve voice recognition of street names, it is necessary to pronounce the street name as a whole. Example: pronounce « Broadway Avenue » and not just « Broadway».

To choose the street name, the following buttons can be used:

Push to talk button Allows you to enter the street name by voice

Long press on « K » button Switches to alphanumerical entry mode

Short press on « Next» button Indicates the next item of the list

Short press on « Previous» button Indicates the previous item of the list

Short press on « K » button Selects the current item on the list

Long press on « Previous» button Returns to the previous menu.

Long press on « Next» button Selects the city center as your destination.

Short press on « Stop» button Exits the menu

Short press on « Play, Pause » button Repeats the title of the menu and current item

on the list

Long press on « Play, Pause » button Activates the contextual help

Street number selection

Either enter the street number into the proposed range of available number of your destination by voice, or switch to alphanumerical mode using the keypad.

If you do not want to enter a specific street number, you can select « Any Number » item from the list or use “Crossroad” item to enter a contiguous street name as destination point.

Note: if the selected street has no available number into the map data, you have to select either “Any number” either “Crossroad” item.

To choose the street number, the following buttons can be used:

Push to talk button Allows you to enter the street number by voice

Long press on « K » button Switches to alphanumerical entry mode

Short press on « Next» button Indicates the next item of the list

Short press on « Previous» button Indicates the previous item of the list

Short press on « K » button Selects the current item on the list

Long press on « Previous» button Returns to the previous menu.

Long press on « Next» button Selects “Any Number” of the street as

destination point.

Short press on « Stop» button Exits the menu

Short press on « Play, Pause » button Repeats the title of the menu and current item

on the list

Long press on « Play, Pause » button Activates the contextual help

Crossroad selection

Either enter the crossroad name of your destination by voice, or select crossroad name from the list proposed using the keypad.