BENZ 2015 PAS
(Rear Camera Interface)
MODEL MB-PAS-150211
DATE 2015.10.15
Main Spec.
1. Input Spec. (MULTI VIDEO INTERFACE)
- 1 x Analog RGB Input (Navigation System output)
- 1 x CVBS(REAR CAMERA) Input. (Rear camera source)
- 1 x CVBS(FRONT CAMERA) Input. (Front camera source)
- 1 x LVDS Input. (Car Command System)
2. Output Spec.
- 1 x LCD Output (LCD Operation)
3. Power Spec.
- Input Power : 8VDC ~ 24VDC
- Consumption Power : 12Watt, Max
4. Switch Input mode
- Possible to select CAR model while switching mode by DIP S/W
- By button on the Commander in the car via CAN
External Appearance
POWER/CAN
LCD-OUT
LCD-IN
LED
DIP S/W
PROGRAM
FRONT
IMAGE
REAR NAVI
Connector Pin Assignment
*POWER Connect
① BATTERY (Yellow)
② REAR_POWER (Red)
③ CAN-HIGH (Orange)
④ CAN-LOW (White)
⑤ NC
⑥ GND (Black)
① ② ③ ④ ⑤ ⑥
*NAVI Connect
① R DATA ( Red)
② G DATA (Green)
③ B DATA (Blue)
④ SYNC (White)
⑤ GND (Black)
⑥ NC
⑦ +5V
① ② ③ ④ ⑤ ⑥ ⑦
Product Composition
Power Cable 1 EA
LVDS Cable 1 EA
Interface 1 EA
RGB Navi Cable 1 EA
OSD Board 1 EA
Product Composition Option
Option : RGB Cable 1 EA Option : Sub Board 1 EA
Not for sale : HDMI Cable 1 EA
DIP S/W Setting
* ON : DOWN , OFF : UP
* DIP S/W Example
PIN FUNCTION DIP S/W Selection
1 NAVI
ON : Not Used
OFF : Used
2 VIDEO mode
ON : Not used
OFF : used
3 N.C
4 HDMI
ON : Not Used
OFF : Used
5 REAR Operation
ON : USER
OFF : OEM
6
CAR type SEL Right Picture 7
8
C class 8.4”Model
C/GLC class 7”Model
S class 12”Model
E/B/CLA/CLS/GLE class
7”/8”Model
S class 12”split view
DIP S/W Setting
Mode Change
* Install Navigation, Dip S/W 1 must OFF
MB2015-PAS
INTERFACE
POWER/CAN
NAVI
PROGRAM
LCD -OUT
FRONT REAR
LCD -IN
DIP_S/W IMAGE LED
DIP S/W Setting
Parking Mode
OEM
Time setting : Parking(P) to Drive(D) mode
P
R
N
D
2
L
P
R
N
D
2
L
OEM
Parking 15sec after or Drive 10Km speed
No Delay
OSD(On Screen Display) Control
MENU Push -> OSD menu On/Off
SEL Item Selection, Value Selection
UP Item up
Increase selected value
DOWN Item down
Decrease selected value
Mode State
First Menu
Second Menu
Third Menu
OSD Control Board
MENU SEL UP DOWN
OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Option
RearCam-Type
OEM Original Camera
ExtDevice Use aftermarket Rear camera
RearCam-Power
ON Rear camera get +12V consistently
AUTO Rear camera get +12V when reverse gear on
OFF Shut out the power supply.
FrontCam-Type
OEM Original Camera
ExtDevice Use aftermarket Front camera
FrontCam-Power
ON Front camera get +12V consistently
AUTO Front camera get +12V when reverse gear on
OFF Shut out the power supply.
RearCam-RcvOpt
ON Show Frontcam 25sec after rear mode.
OFF Default
Reset Excute Option Menu all Reset
OSD(On Screen Display) Control
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Color-RED Adjust the value of RED
Color-GREEN Adjust the value of GREEN
Color-BLUE Adjust the value of BLUE
Reset Excute Option Menu all Reset
First Menu Second Menu Third Menu Action
Image
Brightness Adjust the value of brightness
Contrast Adjust the value of contrast
Saturation Adjust the value of Saturation
Hue Adjust the value of Hue
Sharpness Adjust the value of Sharpness
Reset Excute Option Menu all Reset
NAVI-RGB menu
DVD,DVB-T(DMB),NAVI-AV,REAR,FRONT menu
<< Brightness >>
<< Contrast >>
<< Saturation >>
OSD Setting– Screen Mode
- Horizontal
- Vertical
- Scaler X Up
- Scaler X Down
- Scaler Y Up
- Scaler Y Down
OSD(On Screen Display) Control
OSD(On Screen Display) Control
OSD Setting – Parking Mode On/Off
PARKING LINE ON PARKING LINE OFF
OSD(On Screen Display) Control
OSD Setting – Parking sensor Display On/Off
OPS ON OPS OFF
- Option -> RearCam-RcvOpt -> 0 second = RearCam-RcvOpt menu OFF
1~30 second = RearCam-RcvOpt menu ON & time control
OSD(On Screen Display) Control
OSD Setting – Front Camera Auto Mode
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
REAR FRONT
OEM
NAVI
AV1(DVB-T)
AV2(DVD)
1~30 second
- Factory Reset : Execute - Reset All (Setting Default)
- Version : FW Version
Finish update FW, check the FW versoin
OSD(On Screen Display) Control
OSD Setting – Utility Mode
Software Version
Software Month
Software Year
Special Version
National : CN=CHINA, KR=KOREA, JP=JAPAN, US=United States
Hardware Version
PIP model : PP=PIP, LV=LVDS
Motor model : BM=BMW, BE=BENZ, MA=MASERATI, LX:LEXUS
Last Source : BEPP06SGX-130950
1. Installation Diagram
Install Manual
Monitor
Command
LVDS
LVDS
MB 2015 PAS
INTERFACE
POWER/CAN
LCD -IN LCD -OUT
RGB
+5V
NC
GND
SYNC
BLUE
GREEN
RED
2. Installation External Reverse(Rear) Camera Connection : OSD Screen selection CAN
Install Manual
CAN
6. GND (Black)
5. NC
4. CAN-LOW (White)
3. CAN-HIGH (Orange)
2. REAR_POWER (Red)
1. BATTERY (Yellow)
MB2015-PAS
INTERFACE
POWER/CAN
NAVI
REAR-POWER (Red)
Install Manual
3. Installation External HDMI cable
Galaxy
1
2
②
①
① or ②
iPhone5
RGB Cable
Sub Board HDMI Cable
MHL Cable
MB2015-PAS
INTERFACE
POWER/CAN
NAVI
Install Manual
4. Installation LVDS connection
Head Unit(Command)
Monitor
MUST connect to black
DO NOT USE Grey
Install Manual
5. Installation CAN connection
Pull out
Original black
connector
Push Lock, Pull
out connector
Plug to our
connector
Plug to our
connector
※ Arrow Direction！
Q & A
1. If Interface has a problem, Please check LED.
- ACC on (12v), If Interface does not have a problem; GREEN LED is blinking every 1 sec..
- RED LED is turn on (not blinking), Interface has a problem.
- - RED LED is turn off every 1 sec, there is no input.
- - RED LED and GREEN LED both are not turn on, check the CAN or ACC connection.
2. Q : LCD screen black
A : LVDS Cable problem or, connection problem.
3. When DTV or DVD mode, cannot control with I-Drive
- Check IR cable, and DTV or DVD device’s ground cable and Interface ground cable join together with
using extra cable.
- Check device in OSD menu
Loading...