Kantronics KPC-3Plus,KPC-9612Plus brochure

Packet Communicator

The Kantronics KPC-3+ and the KPC-9612+ are

engineered for dependable and versatile digital

communications. These units reflect many years

of Kantronics experience and are built with an

eye toward emerging applications. The KPC-3+

can fill a variety of roles, including basic packet,

GPS/APRS™, and telemetry. The

KPC-3+/KPC-9612+ FEATURES:

KPC-9612+ is a multi-port, multi-speed data

controller capable of over the air speeds up to

38.4 kbps. In use around the world, Kantronics

Packet Communicators set the standard by

which others are measured!

“NEWUSER” mode provides a quick start for
packet newcomers.

Large capacity internal mailbox and mail
forwarding feature.

GPS operation mode allows use with APRS™
or other geolocation software.

NEW Remote Control and telemetry
functions with two A/D inputs and two
control line outputs.

HC11 Motorola central processor.

Digital audio drive control, set from keyboard
or remote control.

Low current requirements

9-V battery power capability

Network node functions with standard “KA”
Node or optional K-Net ™ firmware.

Optional K-Net node network firmware
retains regular TNC functions.

BBS, KISS, XKISS, HOST, TERMINAL, GPS,
and MODEM operating modes.

Upgradeable as new firmware is released.

“Online” HELP feature

128 k memory standard; 512 k optional

Comes with data connector, data wire, coaxial
power plug, detailed manual, software

Use with base, mobile or hand-held radios.

KPC-9612+ ADDITIONAL FEATURES:

Dual Port 1200/9600 bps operation standard.

Port 1 supports 1200 bps

www.kantronics.com

KPC-9612+

KPC-3+

Port 2 supports 4800, 9600, 19,200,
38,400 bps with DFSK modulation

Multiple user mailbox flashes Mail lamp
for up to 10 call signs

SPECIFICATIONS – KANTRONICS KPC-3+

SPECIFICATIONS – KANTRONICS KPC-9612+

Dimensions (HWD) 0.8” x 5.2” x 5.2” or 21 mm x 133 mm x 133

mm (w/o projections)

Weight 11 oz or 0.32 kg

Power Requirements 6 V dc ~ 25 V dc, less than 30 mA

(LEDs on, unit active) 6 V dc ~ 25 V dc,
less than 15 mA (LEDs off, unit inactive)

Plug Coaxial, center pin positive 2.1 mm

Internal Circuit Board accommodates user installed 9-V

battery connector

Connection Ports DB-9 female (radio)

DB-25 female (computer/data terminal)

Watchdog timer 2.5 min (approx)

External Carrier Detect Pulldown to ground

A/D Converter Two inputs; 0 ~ 5 V dc 8-bit accuracy

Data Rate 1200 bps (recommended); 300, 400, 600

PTT Output Open drain, +50 V dc max, 200 mA max

Audio Output Continuously adjustable 1 mv p-p – 4 v p-p

Output impedance 600 W, ac coupled

Modulation 1200 bps FSK full duplex CCITT V.23

1300 Hz/2100 Hz

Audio Input

Sensitivity 5 mV p-p

Dynamic Range 70 dB

Input Impedance Unbalanced, 10K W; 600 W with

Jumper J3 installed

Max input voltage ± 12 V dc; 35 V p-p sinusoidal

Operating Modes Packet, WeFax, KISS, XKISS, HOST,

GPS, MODEM

LED Indicators Power, Xmit, Rcv, Connected, Status, Mail

(user option on/off)

Remote Control Access External Reset

Operating Protocols AX.25 Levels 1 and 2 (user selectable)

Compliance FCC Class B; Europe – CE Conformity

KPC-3+/KPC-9612+ Applications Include:

Keyboard to keyboard” communications.
Digipeater
Personal Mail Box
Local area node
Remote control devices
Remote access of telemetry
Network node operation
(requires optional K-Net™ firmware)
Multi frequency “node stacking” capability
(with K-Net™ firmware)
BBS operations and message forwarding
GPS positioning transmitting and tracking
(NMEA-0183 data required)
Data storage and retrieval
EMWIN Weather Information (additional software required)

Dimensions (HWD) 0.8” x 6.7” x 6.9” or 20 mm x 170 mm x 175 mm

(w/o projections)

Weight 18 oz. or 0.5 kg (approx)

Power Requirements 5.5 V dc ~ 25 V dc, 45 mA (LEDs on, unit active)

Plug Coaxial, center pin positive 2.1 mm

Internal Circuit Board accommodates user installed 9-V

battery connector

External DB-9 female (radio port 1);

DB-15 female (radio port 2)

Connection Ports DB-25 female (computer/data terminal)

Watchdog timer 3 min (port 1), 40 s (port 2) (approx.)

External Carrier Detect Pulldown to ground

A/D Converter Two inputs; 0 ~ 5 V dc 8-bit accuracy Z in = 20 kW

Data Rate Port 1 4800, 9600, 19,200, 38,400 bps

PTT Output Open drain, +50 V dc max, 200 mA max

Audio Output Port 1 Continuously adjustable 1 mv p-p ~ 4 v p-p

Audio Output Port 2 2 mV p-p ~ (J20) off; 80 mV p-p (J20 on)

Output Impedance 600 W, ac coupled (port1):

600 W, ac or dc coupled (port2)

Modulation Port 1 1200 bps FSK full duplex CCITT V.23

1300 Hz/2100 Hz

Modulation Port 2 Gaussian Filtered DFSK with normal

bandwidth of 0.3, 0.5 or full Duplex
4800, 9600, 19,200, 38,400 bps

Audio Input

Sensitivity Port 1 5 mV p-p ~ 35 V p-p

Sensitivity Port 2 Low: 15 mV ~ 200 mv p-p (J 16 on);

High 80 mV ~ 2 V p-p (J20 on)

Dynamic Range Port 1: >70 dB; Port 2: >20 dB (either range)

Input Impedance Unbalanced, 10 kW,

600 W with Jumper J3 installed

Max Input voltage Port 1: ± 12 V dc; 35 V p-p; Port 2:

± 25 V dc 25 V p-p

Equalization Port 1: None or Fixed; Port 2; Variable,

Software controlled

RX S/N 0~3 V dc (Zout = 2.2 kW)

Operating Modes Packet, WeFax, KISS, XKISS, Host, GPS, Paging, Modem

LED Indicators Power, Xmit, Rcv, Connected, Status, Mail

Remote Control Access All controller functions, user defined password

External Reset Pulldown to ground

Operating Protocols AX.25 version 1 and 2 (user selectable)

Compliance FCC Class B; Europe CE – Conformity

Additional KPC-9612+ Applications:

Send and receive files
Send and receive paging signals (POCSAG 512, 1200, 2400)
1200<>9600 gateway

You can carry a KPC-3+ into the field as a GPS mobile “tracker” or as a mobile data terminal. Its flexible power requirements
(6 - 25 V dc) allow for maximum versatility. You can achieve many hours of use by installing a 9-V battery inside the
KPC-3+. Battery life can be extended by disabling the LED displays through a simple keyboard command.

1202 East 23rd Street | Lawrence, KS 66046 | www.kantronics.com

tel: [phone] | fax: [phone] | [e-mail]

Specifications subject to change without notice or obligation. APRS is a registered trademark of Bob Bruninga, WB4APR. All registered trademarks remain the property of their respective owners.

Authorized
Dealer