Kanmed BABYBED BB101, BABYBED BB100, BABYBED BB404 User Manual

User Manual

Art no: BB100-401F-070 ver 3 Eng
2017-03-01

Manufactured by:

Kanmed AB

www.kanmed.se

Distributed by:

This manual is valid for all BabyBeds that has the Red Stoppers in the side walls and
also valid for beds that has been upgraded to hydraulic tilt release and/or new side
walls with Red Stoppers.

Caution

Please read this manual carefully.
Incorrect use may cause patient
or user injury.

User Manual BB100-400 /070

Page 2 of 20

Contents

1 GENERAL DESCRIPTION / INTENDED USE ......................................................................................... 3

2 WARNINGS ................................................................................................................................................ 3

3 DESCRIPTION OF SYMBOLS................................................................................................................... 4

4 GENERAL INSTRUCTIONS FOR USE ..................................................................................................... 5

5 CLEANING ................................................................................................................................................ 10

6 REGULAR SAFETY CHECKS BEFORE USE .......................................................................................... 13

7 TROUBLE SHOOTING ............................................................................................................................. 13

8 TECHNICAL DATA ................................................................................................................................... 14

9 TECHNICAL SECTION - SERVICE AND MAINTENANCE .................................................................. 15

10 SPARE PARTS/ACCESSORIES ............................................................................................................ 17

11 WARRANTY STATEMENT ..................................................................................................................... 18

12 EMC GUIDE-LINES ............................................................................................................................... 18

13 DISPOSAL .............................................................................................................................................. 18

BB101Standard without rails BB100 Standard with rails BB400 Twin Version with rails

User Manual BB100-400 /070

Page 3 of 20

1 Intended Use

Intended Use

The intended use of the Kanmed BabyBed is to provide an ideal ergonomic and safe Bed for
premature and new born babies in a hospital environment. It is also intended to be used with
the Kanmed BabyWarmer systems BW3 or BW-50.

It is intended to be used by hospital personnel or the baby’s caretaker according to the

instructions given in this manual and according to your established clinical routines. Only
persons that have been instructed in the use of the Kanmed BabyBed shall be allowed to use
the product.

2 Warnings

• Do not use the Kanmed BabyBed with babies/small children that are able to move so

that they might fall/climb out of the Bed.

• Ensure that the side walls are locked in the highest position when the baby is

unattended.

• Do not move the Bed around in the high position. Always use the lowest position.

• Do not use the Side Walls to move the Bed – always use depending of model the Side

Rails or front handle.

• Do not leave a baby unattended with the Side Walls down.

• Respect the weight limits.

• Check that the Bed is not wobbly meaning that all wheels and bolts are tightened.

• Ensure that there are no people or objects in the way when changing height.

• Remove the Tent Pole if the Bed is used without a tent.

• The Tent Pole is only to be used for a tent.

• If children, relatives or patients, or patients with special needs are at risk of pressing /

playing with the Foot Pedal, then disconnect the power. Make sure that the Kanmed
BabyWarmer still has power if connected.

• Keep safe distance to other products that can move up or down.

• Max mattress thickness is 40mm

• Only persons that have been instructed in the use of the Kanmed BabyBed shall be

allowed to use the product.

User Manual BB100-400 /070

Page 4 of 20

•

3 Description of Symbols

Read the user manual before use.

Models available:

BB100

Standard BabyBed

BB101

Same but without rails

BB400

BabyBed for Twins

BB401

Same but without rails

BB300

Standard BabyBed fixed height

BB301

Same but without rails

BB400F

BabyBed for twins with fixed height

BB401F

Same but without rails

Maximum safe working loads permitted:

Bed Tray, all versions: Baby(ies) weight 10 kg total + Water Mattress(es) Gel Mattresses

or other mattresses, total 10kg

Storage Box Lid under Bed Platform: 2kg
Storage Box under the Bed Platform: 2kg
Side Rails around the Bed: Max 3,5 kg on each Rail. Max totally 10 kg on all Rails.
Shelf: 5kg. Rear mount kit poles: 3 kg each
Front handle: 5 kg (models without side rails)

Symbol on Foot Pedal for raising and lowering the Bed Platform (not for
BB300 and BB400F)

Symbol for tilt function, found on the Bed Tray Label

Fulfils MDD 93/42 EEC

Earth potential equalization connection point.

IP 30

Degree of protection (against ingress of water and foreign objects)

Protection grade Type B (Body) (not for BB300 / BB400F

When the BabyBed reached end of life, it should be returned to the
distributor for recycling in accordance with the EU 2002/96/EC (WEEE)
directive if applicable.

Year of manufacture.

Maximum minutes
nonstop use of the
electrical Pillar

Total weight of bed when loaded with max permitted weights

Risk of hand injury

User Manual BB100-400 /070

Page 5 of 20

4 Instructions for Use

4.1 First cleaning

The Kanmed BabyBed and accessories must be cleaned according to your hospital routines.
Please refer to section 5 Cleaning before use with a patient.
See section 5 for mounting of side walls, etc.

4.2 Check stability

Make sure that all bolts and screws are properly tightened and that the Bed feels stable.

4.3 Lowering the Side Walls

The Side Walls and the Front Wall are lowered in the following way.
Use both hands and take hold of the upper edges.
Pull straight up (5mm, ¼ inch) – pull towards you (2 cm, 1 inch) – push down gently.
Use both hands to pull the Side Walls up again – push a little forward and then lower it.
Ensure that they are securely in place.
Ensure that all Side Walls are moving correctly and in good condition.
NOTE: Check that nothing gets trapped when you lower and raise the Side Walls.
NOTE: Removing the Side Walls – see section 5 Cleaning

4.4 Moving the Bed around

Always use the Side Rails or the front handle for moving the Bed.
Warning: Use a low Bed height when moving or transporting, especially with a baby inside.
NOTE:

• Do not use the Side Walls for moving the Bed.

• Do not forget to unplug any cables before moving.

• Use Wheel Brakes when Bed is not to be moved.

User Manual BB100-400 /070

Page 6 of 20

4.5 Connecting the BabyBed to the mains (not for BB300/301 and BB400F/401F)
The BabyBed must be connected to an
earthed power outlet using a grounded cable.
Route the cable so that no one can get caught
or fall because of it.
NOTE: The only way to break the power
is to either disconnect the cable at the
Pillar base or at the wall socket.
Place the Bed so that the cable
can easily be disconnected.
WARNING: To avoid the risk of
electrical shock, this equipment must
only be connected to a power outlet
that has protective earth.

4.6 Adjusting height (not for BB300/301 and BB400F/401F)
The height is adjustable by pressing the Foot Pedal
at the wheel base.
Connect power and run the Bed up and down
and ensure that it moves smoothly without
any unusual noise.
The motor can be heard which is an
indication/warning that the Bed Platform is now moving.

Foot pedals can be mounted on the left or right side or on
both sides. Front pedal is also available.

WARNING:
When changing height, make sure that no person, cable or other items prevents the
movement and that no cable is jammed or wrapped between the Pillar and the Wheelbase or
somewhere else.
If children, relatives or patients are at risk of playing with the foot pedal, then disconnect the
power. Make sure that the Kanmed BabyWarmer still has power.
Do not block the movements when activating the electrical height adjustment.