Kanguru Solutions Micro MP3 User Manual
User’s Manual
Table of Contents
1. Introduction
1.1 About the KanguruMicro MP3 --------------------------------------------------2
1.2 Features -----------------------------------------------------------------------------3
2. How to use KanguruMicro MP3 player
2.1 Mechanical parts------------------------------------------------------------------4
2.2 How to install replacement battery--------------------------------------------4
2.3 Function-----------------------------------------------------------------------------5
3. How to Install / Modify / Repair / Remove driver
3.1 Windows 98 / 98SE Installation ----------------------------------------------- 10
3.2 Modify or Repair driver for Windows 98 / 98SE---------------------------- 12
3.3 Remove driver from Windows 98 / 98SE------------------------------------ 14
3.4 Windows 2000 / ME / XP Installation----------------------------------------- 16
4. Removing the KanguruMicro MP3 --------------------------------------------------16
5. Linux 2.4.0 + / Mac 8.6 + Installation -----------------------------------------------16
IMPORTANT NOTICES
----------------------------------------------------------------------17
1
Important Notice:
Some computers may have a small power leakage from the USB port. To
avoid any direct damage caused to KanguruMicro MP3, we suggest you
use the extension cable, USB hub, or docking station to connect the
KanguruMicro MP3 to your computer. Do not plug the KanguruMicro MP3
directly into the computer.
1. Introduction
1.1 About the KanguruMicro MP3
Palm Sized MP3 Player PLUS Portable Storage!
The KanguruMicro MP3 is a portable USB flash drive AND MP3 Player rolled
into one! Store and play all your favorite music as well as any other files you need
while on the go. It plugs directly into a USB port, working with Windows,
Macintosh and Linux, and is driverless with most Operating Systems.
2
1.2 Features
- Supports MP3 music format
- Earphone jack: 2.5 mm
-
Universal Headphone adapter
- Audio output: 5mW+5mW
- Output frequency range: 20HZ – 20KHZ
- Battery: Lithium-ION 500mA 3.7V
-
Battery Life: 7.5 hours of continuous use at full charge
- Support USB specification revision 1.1
- Transferring rate: up to 12MB per second at “Full Speed”.
- Power saving mode to reduce power consumption while unit is idle.
- Supported by Windows 2000, ME, XP, Mac OS 8.6 or above and Linux 2.4.0 or
above without device driver.
- Supported by Windows 98/98SE with device driver.
- Power LED: (i) Plug KanguruMicro MP3 into USB port to re-charge battery
through computer. Orange LED light means the battery is
charging.
(ii) Green LED light indicates the battery is fully charged.
- Play LED: (i) Red LED indicates you are in MP3 player mode.
(ii) Red LED flashes quickly when no MP3 files are found.
(iii) Red LED flashes slowly when you pause MP3 player.
(iv) Green LED indicates you are in USB removable disk mode.
(v) Green LED blinks when you are reading/writing.
- Write / delete protection switch.
- Hot Plug & Play - Enables you to install KanguruMicro MP3 at anytime.
- Durable solid-state storage – data retention for at least 10 years.
-
Erase Cycles: 1,000,000 times
- No external power is required - DC 4.5V ~ 5.5V from USB port.
- Low Power consumption：Write 39.1mA ~ 39.4mA / Read 35.0mA ~ 36.1mA.
- Read/Write Speed of USB interface: Read 800KB / Write 600KB
- Size: 91.2 x 30.4 x 26.3 mm
- Unit weight: 30g (not including battery)
-CE and FCC certificate of approval.
3
2. How to use KanguruMicro MP3 player
2.1 Mechanical parts
2.2 How to install a replacement battery
1. Remove battery cover by pressing two sides.
2. Connect battery’s cord to the power port.
3. Put back battery cover.
4. Connect to USB port to fully charge battery for first time use.
4
2.3 Function: MP3 player mode
1. The MP3 function is enabled when the earphones plugged in.
(Earphone port is 2.5mm)
5
Loading...