Kanguru FLASH DRIVE, WIZARD User Manual

The Kanguru Wireless LAN Quick Start Guide 1

Installation of the Kanguru Wireless LAN is dependent on the
operating system. Please follow the instructions carefully to make
sure you are taking the appropriate steps for your operating system.

Windows 98 SE users must first install the Flash Driver (Steps 1
to 3 below). All other users do not need to install the Flash
Driver.

Install the Flash Driver
(Windows 98 SE Only)

Step 1: Plug-in the Kanguru
WLAN first and choose

Search for the best driver
for your device when the

wizard begins, then click
Next.

Step 2: Uncheck the box CD-
ROM drive and check the
box Specify a location.
Choose E:\KanguruWireless
LAN\Flash Driver, where E is
your CD-ROM drive letter.
Click Next to continue.

Step 3: The wizard will find the
location of the driver to be:

E:\KanguruWirelessLAN
\FLASHD~5\USTORAGE.INF

Click Next then Finish to
complete the Flash Driver
installation.

A. Insert the installation CD into
your CD-ROM drive. The setup
program will start automatically.

C. Select the destination folder.
To install to the default folder as
shown on the right, click Next to
continue.

Install the WLAN Driver / Utility

B. Click Next to begin the setup.

The Kanguru Wireless LAN Quick Start Guide 2

Configure the Kanguru WLAN Network

Settings

D. During the installation,
drivers and utility files will be
copied to your system directory.

G. Windows 98 SE / NT / ME /
2000 users will see a WLAN
Manager shortcut icon on the
desktop. Click on this icon to

E. Click Finish to complete the
installation. Unless you are
running Windows 98 SE / ME
you will not need to restart.

run the configuration utility.

Connect the Kanguru WLAN to Your PC

H. (Windows XP Only) Windows
XP uses the built-in Wireless
Zero Configuration Utility. To
run the utility, click on the
Wireless Network Connection
icon in the System Tray.

F. Connect the Kanguru WLAN
to the USB port on your
computer. There is no need for
an external power supply. The
Kanguru WLAN will get its
power from the PC's USB port.
Use the supplied hanger for
optimal signal range and
performance.

*Please refer to the User Manual for detailed configuration settings.