Trademarks and/or registered trademarks are the property of their
respective owners:
The information presented in this publication has been carefully prepared and is
believed to be correct at the time of publication. However, no responsibility will be
assumed for any inaccuracies. Specifications are subject to change without notice.
2
Please be aware of the following points before using your Kanguru BioSlider II.
To obtain service or technical support for your system, please contact Kanguru Solutions
Technical Support Department at 508 -376-4245, or visit www.Kanguru.com for web support.
LIMITED WARRANTY
Kanguru Solutions guarantees that every Kanguru QS2 will be free from defects in
workmanship and materials for 1 year from the date of purchase. The Hard Drive installed in
the QS2 is covered for 3 years. This warranty does not apply if, in the judgment of Kanguru
Solutions, the product fails due to damage from handling, accident, abuse, misuse, or if it has
been used in a manner not conforming to the product’s instructions, has been modified in
anyway, or the warranty labels have been removed. If the product proves defective during this
warranty period, call Kanguru Solutions Technical Support in order to obtain a RMA required
for service. When returning a product, mark the RMA number clearly on the outside of the
package, and include a copy of your original proof of purchase.
In no event shall Kanguru Solutions’ liability exceed the price paid for the product from direct,
indirect, special, incidental, or consequential software, or its documentation. Kanguru
Solutions offers no refunds for its products after 30 days of purchase. Kanguru Solutions
makes no warranty or representation, expressed, implied, or statutory, with respect to its
products or the contents or use of this documentation and all accompanying software, and
specifically disclaims its quality, performance, merchantability, or fitness for any particular
purpose. Kanguru Solutions reserves the right to revise or update its products, software, or
documentation without obligation to notify any individual or entity.
Chapter 3 : Starting the BioSlider II……………………………………………….10
Chapter 4 : Recovery…………………………………………………………….….18
4
Chapter 1: Introduction
USB 1.1/2.0 Kanguru BioSlider II
Storing, moving, and securing the data has never been easier. The Kanguru BioSlider
II is equipped with encryption technology that allows only authorized users to access
your data. The BioSlider II is available in multiple capacity versions to provide
enough space to store confidential documents, presentations, high-resolution
photographs, videos, and any other personal/private files you wish.
Features
lPortable USB 1.1/2.0 Kanguru BioSlider II equipped with biometric security to
prevent confidential information being accessed by others
l Fingerprint scan (or password) required to obtain the data from the BioSlider II
l No software or driver install necessary for Windows 2000 and XP
l Reliable data retention
Dimensions : 85mm x 27mm x 13mm
Weight: Approximately 19g
Available Capaci ties: 256MB, 512MB, 1GB , 2GB , 4GB, and 8GB.
The Kanguru BioSlider II is one of the most secure and developed data storage
devices on the market. It utilizes leading-edge biometric technology, and a user can
only access the hidden secure files upon providing his/her identity that is approved by
the scanner’s authentication. All data saved on the BioSlider II is automatically
hidden and encrypted.
The BioSlider II is equipped with advanced high-definition sensor to make it secure
and unexposed.
Hardware Requirements
l Pentium @ 100MHz (minimum)
l 32MB RAM (64MB recommended)
l 1 USB Port
Compatible Operating Systems :
5
l Windows 98SE with Device Driver
l Window 2000/ME and Windows XP
System Requirements
A. Plug- in the BioSlider II only after the Windows 98SE driver has been installed.
(Windows 98 Users Only)
B. Be sure you have Windows 2000 Service Pack 4 or Window s XP SP2
installed from Microsoft Update.
Before Use
A. Keep the BioSlider II away from heat, direct sunlight, and moisture. Do not
bend, flex, or drop the BioSlider II
B. To prevent data loss and/or damage to the BioSlider II, do not remove the
BioSlider II from the USB port while data is transferring
C. Keep the sensor away from sharp objects, such as keys and knives
D. Do not store the BioSlider II in dusty, dirty areas or conditions
E. Do not paint the BioSlider II. Paint will clog the parts and prevent proper
operation
F. On the side of the BioSlider II is a small dipswitch, which allows you to
protect data from accidental erasure. The driver will not allow copying to or
erasing of the contents on the drive. You may slide the switch from the left
(unlocked) position to the right (locked) position.
6
Chapter 2: Installation Guide
Windows ME/2000/XP Installation
No driver installation is required for Window s ME, 2000 or XP operating systems as
Windows has built-in drivers to support the BioSlider II . Plug the BioSlider II into a
USB port and it will be recognized by the system. Double click “My Computer” on
the desktop; you will see a “Removable Disk” drive icon, which represents the
BioSlider II. To start, double click the Drive labeled as ‘FP Software’ (BioSlider II
Setup).
Removing the BioSlider II under Windows ME /2000/ XP
1. Right click the “Red Finger Print” icon in the taskbar and select “Exit”
2. Double click the “Unplug or Eject Hardware” icon on the bottom right
of the screen.
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.