KanexPro WP-EXTHDBTX1 User Manual

WP-EXTHDBTX1 - Single Gang HDMI® Wall plate over HDBaseT™

1

Single Gang HDMI®2.0 Wall plate over

HDBaseT™ w/ IR, RS-232 & PoC

(1- Gang US Decora)

All Rights Reserved

Version: WP-EXTHDBTX1_2018v2.0

WP-EXTHDBTX1 - Single Gang HDMI® Wall plate over HDBaseT™

2

Thank you for purchasing this product

For optimum performance and safety, please read these instructions carefully before
connecting, operating or adjusting this product. Please keep this manual for future
reference.

Surge protection device recommended

This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shook, lighting strikes, etc. Use of surge protection
systems is highly recommended in order to protect and extend the life of your
equipment.

Table of Contents

1. Introduction ................................................................................................................. 3

2. Features ....................................................................................................................... 4

3. Package Contents ......................................................................................................... 4

4. Specifications ............................................................................................................... 5

5. Operation Controls and Functions ................................................................................. 6

5.1 Front panel ............................................................................................................. 6

5.2 Rear panel .............................................................................................................. 7

6. Application Example ..................................................................................................... 9

7.Warranty…………………………………………………………………………………………………..……….9

WP-EXTHDBTX1 - Single Gang HDMI® Wall plate over HDBaseT™

3

FCC Statement

This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. It has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in
a commercial installation.

Operation of this equipment in a residential area is likely to cause interference, in
which case the user at their own expense will be required to take whatever
measures may be necessary to correct the interference.

Any changes or modifications not expressly approved by the manufacture would
void the user’s authority to operate the equipment.

1. Introduction

The KanexPro WP-EXTHDBTX1 is a US Decora style single gang HDMI 2.0® wall plate
transmitter designed for connecting one HDMI device such as a laptop, Blu-ray, or a
4K media player remotely over CAT5/6 up to 230 ft. (70 meters). The outputs is via
HDBaseT port. It supports full 18 Gbps bandwidth with true 4K video resolutions up
to 4/60Hz, HDCP 2.2 compliant and will extend 4K up to 40m delivering color
sampling rate of 4:4:4.

PoC & Control

The wall plate transmitter supports PoC – power over cable requiring only power
supply from the Receiver optional, part# EXT-HDBT70MRX side to operate. It also
supports bi-directional IR control and RS-232 control for devices to and from the
display.

Applications:

Ideal for use within court rooms, classrooms, conference rooms or showrooms
where audio-visual devices can be extended from a remotely located HDMI source
device. This single-gang HDMI wall plate can be used anywhere to enhance signal
integrity over CAT5e/6 cabling.

WP-EXTHDBTX1 - Single Gang HDMI® Wall plate over HDBaseT™

4

2. Features

• Single Gang, One HDMI Input wall plate over HDBaseT

• Extend 4K/60 w/ 4:4:4 up to 40 meters (130ft.)

• Extend 1080p/60 w/ 4:4:4 up to 70 meters (230 ft.)

• Supports the latest HDMI 2.0 Specs with 18 Gbps bandwidth

• Digital Audio Support up to 7.1 channels of HD audio

• HDCP 2.2 /1.4 Compliant

• Bi-directional IR & RS-232C

• Remote power support thru PoC (Either from Tx or Rx)

• POC Power consumption is less than 10W

• Simple point-to point transmission over CAT5e/6

• Active LED status indicator

3. Package Contents

① 1× 18G HDMI Wall Plate Transmitter
② 1× User Manual
③ 2× Phoenix connector(2 pins)
④ 2× Phoenix connector(3 pins)