The IP Streamer
EXT-IPSTREAMKITX1
HDMI Streaming Transmitter& Receiver
All Rights Reserved
Version: EXT-IPSTREAMKITX1_2015V1.1
HDMI Streaming Transmitter& Receiver
1
Statement
Read this user manual carefully before using this product. Pictures shown in this manual
is for reference only, different model and specifications are subject to real product.
This manual is only for operation instruction only, not for any maintenance usage. The
functions described in this version are updated till February 2015. Any changes of
functions and parameters since then will be informed separately. Please refer to the
dealers for the latest details.
All rights reserved. No part of this publication may be copied or reproduced without the
prior written consent.
All product function is valid till 2015-2-7.
Safety Precaution
To insure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
! Follow basic safety precautions to reduce the risk of fire, electrical shock and injury
to persons.
! Do not dismantle the housing or modify the module to avoid electrical shock or burn.
! Using supplies or parts not meeting the products’ specifications may cause damage,
deterioration or malfunction.
! Do not expose the unit to rain, moisture or install this product near water.
! Install the device in a place with fine ventilation
! Do not twist or pull by force ends of the optical cable. It can cause malfunction.
! Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to
the device before cleaning.
! Unplug the power cord when left unused for a long period of time.
! Refer all servicing to qualified service personnel.
After-sales Service
We provide limited warranty for the product within three years counting from the first
day you buy this product (The purchase invoice shall prevail).
For more details, please contact your dealer.
HDMI Streaming Transmitter& Receiver
2
Introduction
The KanexPro IP Streamer Set is a HDMI Streaming media including a transmitter and
a receiver. Accommodating HD video ports and IP ports, it features real-time AV coding
(transmitter) and decoding (receiver) to broadcast 1080p (max) HDMI& DVI signal from
1 transmitter to 1 or several receivers with the assist of an Ethernet Switch. Besides, it
can be powered with PoE solution for up to 200m via single CAT6.
Note: The Extender kit does not come with an AC adaptor, since power will be provided
from LAN switch supporting PoE. Correct power supply model # EXT-PSU1
Features
! HD interface for digital audio and 1080p@60Hz (max) video up to 175/200m with
CAT5e/CAT6
! 1 RJ45 port for Ethernet Interchange connection
! HDMI 1.3& HDCP 1.3 compliant
! Pass through input resolution to output
! Intuitive indicator for power connection& signal transmission status
! Broadcast HDMI signal from 1 transmitter to 1 or several receiver(s)
! Powered by adapter or Ethernet Switch with PoE solution
! Compact design for easy operation
Package List
1. IP Extender kit (Tx x &Rx)
2. Manual
Notes：4 packing schemes are provided for different orders, please check your
accessories accordingly. If there is any broken or missing part, contact your dealer to
make up.
HDMI Streaming Transmitter& Receiver
3
Connection
The figure below illustrates a typical connection that can be utilized with the HD Video
Streaming transmitter& receiver:
One or more receiver may be utilized in this case to broadcast signal from 1 transmitter
to 1 or more receiver.
Note: Do not share ground connection with display.
Or you can connect the IP ports of transmitter and receiver directly if 1 receiver is
needed. In this case, connect DC 5V power adapter to both ends.
Specification
Input
Input
1 HDMI, 1 IP
Input Connector
1 female type A HDMI 1.4, 1 RJ45
Min/ Max Signal Level
T.M.D.S. 2.9V~3.3V
Output
Output
1 HDMI, 1 IP
Output Connector
1 female type A HDMI 1.4, 1 RJ45
Min/ Max Signal Level
T.M.D.S. 2.9V~3.3V
Output Impedance
Differential 100Ω
Standards
Compliant with HDMI 1.3 & HDCP 1.3
General
Transmission
Distance
200m (CAT6)
175m (CAT5e)
Power
Consumption
Transmitter: 4.2W
Receiver: 3.5W
Power Supply
DC 5V 1A
Resolution
1080P@60Hz(Max)
Temperature
0 ~ 50℃
Humidity
10% ~ 90%
Weight
0.17 lbs. (80g)
Dimension
4.7”x0.8”x2.36”(W*H*D)
IP IN
D
V
D
H
D
T
V
E
t
h
e
r
n
e
t
S
w
i
t
c
h
R
x
T
x
Loading...