EXT-100SL18G
UltraSlim 4K/60 HDMI® 2.0 Extender
over HDBaseT™ up to 330ft. (100m) & PoH
All Rights Reserved
Version: EXT-100SL18G_2017V1.0
HDBaseT Extender Set
1 | Page
Statement
Read this user manual carefully before using this product. Pictures shown in this manual is for reference
only, different model and specifications are subject to real product. This manual is only for operation
instruction only, not for any maintenance usage. The functions described in this version are updated till
December 27, 2017. In the constant effort to improve our product, we reserve the right to make functions
or parameters changes without notice or obligation. Please refer to the dealers for the latest details.
Safety Precaution
To insure the best from the product, please read all instructions carefully before using the device. Save
this manual for further reference.
Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
Do not dismantle the housing or modify the module to avoid electrical shock or burn.
Using supplies or parts not meeting the products’ specifications may cause damage, deterioration or
malfunction.
Do not expose the unit to rain, moisture or install this product near water.
Install the device in a place with fine ventilation.
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
Unplug the power cord when left unused for a long period of time.
Refer all servicing to qualified service personnel.
After-sales Service
We provide limited warranty for the product within three years counting from the first day you buy this
product (The purchase invoice shall prevail).
Introduction
The KanexPro EXT-100SL18G extender is an UltraSlim 4K /60Hz transmitter - receiver set designed to
extend natural and uncompressed ultra HD 4K signals from your HDMI source device to a 4K display
remotely located 230 feet away and full HD 1080p signals up to 330ft.(100m). It also supports PoH
(power over HDBaseT) requiring you to power only from one side, either the sender or receiver. For
dynamic range and wide color range (gamut) HDR and 4:4:4 Chroma color sampling are one of the key
features of these extenders. It also adds 2x Ethernet ports for LAN access and connecting to devices to
internet.
HDBaseT Extender Set
2 | Page
Features
Ultra Slim 330ft. (100m) HDMI extender over HDBaseT w/ PoH
Extend up to 70m for 4K/60 video w/ 4:4:4 Chroma
HDR (high dynamic range) & wider color gamut support
Supports Ultra HD 4K@60Hz resolutions &
Video resolutions from 1080p/60@48bit
18 Gbps bandwidth
Bi-directional PoH (power over HDBaseT)
HDCP 2.2 and EDID compliant
CEC Pass-thru
IR input/output - embedded over CATx extension
Dolby TrueHD & DTS Master Audio ready
Supports uncompressed audio - LPCM
Bi-directional RS-232 & IR control
Ultra Slim enclosure w/ separate mounting ears
One locking power supply included
Backed by KanexPro 3-year parts and labor warranty
Note: Please use a CAT5e/6 cable with low impedance (Shielded twisted pair is recommended
with proper grounding) for excellent transmission of AV signals.
HDBaseT Extender Set
3 | Page
Package List
1 x Transmitter
1 x Receiver
4 x Mounting ears & 4 x Screws
8 x Plastic Cushions
2 x RS232 Cables (3-pin to DB9)
1 x Power adaptor (24VDC,1.25A)
1 x IR Receiver (5V, optional)
1 x IR Emitter (5V, optional)
1 x User Manual
Panel Description
Transmitter
Receiver
No.
Name
Description
①
RS232 MODE switcher
CTRL: RS232 pass-through control mode;
UPDATE A: Update Valens IC program, connect a PC to the
RS232 port, and then double-click the update file (.bat).
UPDATE B: Update compression IC program, the upgrade method
is the same as the above UPDATE A.
②
Link status LED
OFF: No Link; GREEN:Link successful.
③
HDCP compliant LED
OFF: No HDMI traffic (no picture); GREEN: Traffic with HDCP;
Blinking: Traffic without HDCP.
④
Power LED
OFF: No power; RED: DC power present.
⑤
RS232 connectors
If one relates to control device (e.g. PC), and the other should
relate to the third-party that need to be controlled.
⑥
IR IN
Work with far-end IR OUT port, connect with IR Receiver (with
carrier) to collect IR signal to control far-end display device from
local.
⑦
IR OUT
Work with far-end IR IN port, connect with IR Emitter to send IR
signal to control input source device from remote.
⑧
HDMI IN (Transmitter)
Connect with HDMI source.
HDMI OUT (Receiver)
Connect with HDMI display.
⑨
HDBT OUT (Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a/7 cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a/7
cable.
⑩
ETHERNET
Total 4 100M Ethernet ports, one of these ports should be used for
1
2
3
4 5
6
7
8
9
1110
1
2
3
4 5
6
7
8
9
10 11
HDBaseT Extender Set
4 | Page
internet access, and the others can relate to computers. If connect
successfully and work normally, the yellow LED will keep blink and
the green one will keep on.
⑪
DC 24V power ports
Support bi-directional PoH, one of ports should relate to DC24V
1.25A power adaptor.
Specification
Model
Spec
Transmitter
Receiver
Input
HDMI IN
HDBT IN
Output
HDBT OUT
HDMI OUT
Control Ports
IR IN, IR OUT, RS232
IR IN, IR OUT, RS232
Ethernet Ports
2 RJ45 connectors
2 RJ45 connectors
General
Transmission Mode & Distance
HDBaseT; 1080P ≤ 100m; 4K×2K ≤ 70m
Ethernet Transmission Speed
Adaptive 10M/100M (max), full duplex or half duplex.
Resolution
Up to 4K×2K@60Hz 4:4:4
Bandwidth
18Gbps
HDMI Standard
HDMI2.0 & HDCP2.2
Power Consumption
20W (max)
Temperature
-10 ℃~ 50℃
Humidity
0% ~ 90%
Power Supply
Input: 100VAC~240VAC, 50/60Hz; Output: 24VDC 1.25A
Dimension (W*H*D)
152mmx16.2mmx104mm
152mmx16.2mmx104mm
Net Weight (g)
240g
240g
System Diagram
NOTE: This picture is for reference only, the specific scheme maybe subjected to different applications.
HDMI:
RS232:
IR:
HDBaseT:
Ethernet:
RXTX
RXTX
IR
Emitter
DVD
Laptop
IR Receiver
TV Remote
IR
Emitter
IR Receiver
DVD Remote
Router
Transmitter
Receiver
Laptop
Laptop
Loading...