Quick Start Guide for UEi HUB Tools
SETUP:
Download and install the UEi HUB App
Open the App and navigate to the Tools
Connection Screen by tapping on the tool box
icon in the lower navigation bar.
Power on the HUB Tools and wait until you see
the flashing green LED.
WPP1 – Press and hold Power button for 1
second.
WHP1 – Press the probe release and extend the
sensing probe 90° or 180° until it locks in place.
In the App you will see the tools appear in the
“Nearby Tools list”.
If tools are missing tap the refresh icon and the
list will refresh.