USER MANUAL
K64P36W3RGBAW
I n d e x
summarize ......................................................................... 3
safety instruction ................................................................ 3
outside size picture ............................................................. 4
main function ...................................................................... 5
DMX controller function ....................................................... 5
Display operation instruction............................................... 6
Manual instruction............................................................... 7
Operating control instruction............................................... 9
XRL connection instruction .................................................. 9
Connection picture .............................................................11
Exploded Views ..................................................................13
illuminance list...................................................................14
Problem analyse.................................................................15
Technicals secification…………….…………………………..………17
Summarize
Thank you for purchasing our LED PAR lighting. Please read these instructions
carefully before begin
avoid any possible damages and
and operate the fixtures according to these instructions to
accidents causes by misusage.
Products introduce
This led
hydrodynamic form. Appearance shows: long can, short can or
color filter
switch, performs low weight and consumption, stable
The built-in program includes dimmer, strobe, eotic, gradual change, fading and
so on. International standard DMX 512 signal is requested.
K64P36W3RGBAW
. It takes uses high power
light is uses aluminum shell
, designed in a fashion of
R,G,B,A,W 5 kinds
capability and long life.
short can with
LED. It uses power
Packing list
• K64P36W3RGBAW light 1PC
• DMX cable 1PC (Sold separately)
• The use manual
• Warranty Card
Safety Information
! Enquire the skilled people before any repair;
! Always make sure disconnect from the power source before setting up, serving and
moving;.
! Avoid direct eye exposure to the fixture when it is on;
Safety instruction
● Make sure the power supply voltages are consistent with this lights，Ensure the
use of voltage is in the range of the request technical parameter.
●before the installation, please check the light’s fasteners and mechanical
structure have been received in good condition and appear no damage.
●
This light is designed for indoor use,
working
temperature is lower than 40
degree.
●The fixtures maybe mounted in any position provided there is adequate room
for ventilation. Make sure there are no inflammable and explosive items
(ornaments) in 0.5 meters away.
●Yellow / green cabling earthling safety; no flicker when the fixture is working on.
Outside Size Picture
Main Function
•
high quality LED: low consumption, brightness, stable
• Each color of LED with 256 dimming, RGB each color has a good degree of
saturation.
• Liner Dimming 0%-100%, function of strobe, eotic, gradual change and
jumping change
• DMX512 Controller，4 button set DMX ID address with led display
• auto run /sound activated/master slave/interconnected multi-machine control
• using switching power supply to protect the LED to work well
• lens degree: 15º、25º、45º optional
• DMX512 channels:4,5,9 channels
• body color: black/white/optional
capability and long life
DMX Control Function
4CH
Channel DMX Value Control Function Remark
1CH 0-255 RGB mixing 0-100%
2CH 0-255 A 0-100%
3CH 0-255 W 0-100%
4CH 0-255 General dimming 0-100%
5CH
Channel DMX Value Control Function Remark
1CH 0-255 R 0-100%
2CH 0-255 G 0-100%
3CH 0-255 B 0-100%
4CH 0-255 A 0-100%
5CH 0-255 W 0-100%
From the
9CH
Channel DMX Value Control Function Remark
1CH 0-255 General dimming
2CH 0-255 Red Dimming 0——100%
3CH 0-255 Green Diming0——100%
4CH 0-255 Blue Dimming 0——100%
5CH 0-255 Amber 0——100%
6CH 0-255 White 0——100%
7CH
0-14 Dimming
15-255 Strobe Speed
When the 7CH
above31，this
function is
invalid
8CH
0-31 Invalid
32-63 From dark to bright
64-95 From bright to dark
96-127 From dark—bright—dark
128-159 RGB Gradient
160-191 dark-bright-dark Automatic
Must use CH1
2、3、4，5
otherwise no
light
9CH, start the
192-223 5 colors jumping change
224-255 Many color mixing jumping
adjustment
，
speed
change
9CH 0-255
Speed adjust（slow--quick）
、
Display Operation
• MENU : access the menu or return to a previous menu option
• ENTER: select the current menu option
• UP: menu selection or parameter increments
• DOWN: menu selection or parameters decrease
Manual Instruction
Operating instruction
1 MENU is used to access the menu or return to a previous menu option. It can
not be used to select and store the current menu option. Press UP / DOWN to
choose a desired menu item. Here are the operation details :
• ”addr”: DMX mode （A001-A512）
• SLAV”: Slave receive mode
• “CHnd”: DMX accept channel select (4, 5, 9)
• ”SP”; built-in program speed change model (SP00-SP15, SP00 is the fastest)
• ”Pr”; Built-in program （Pr00-Pr15 16 program in all）
• ”ASC”; many colors jumping（AS00-AS15 speed adjustable）
• ”FAdE”: gradual change model（FA00-FA15 speed adjustable）
• ”FLAS”: white color strobe（FL00-FL15 speed adjustable）
• ”rL”: red color brightness adjustment mode（r000-W255, r255 is the brightest）
• ”gL”: green color brightness adjustment mode（g000- g255, g255 is the brightest
• ”bL”: blue color brightness adjustment mode（b000- b255, b255 is the brightest）
• ”uL”: white color brightness adjustment mode（u000- u255, u255 is the brightest
）
2 Press ENTER to access the further menu setting. This process can be saved
automatically; that means you will enter the process saved previously when
you activate the light next time. For example, if you want to choose DMX
mode A001, operate as follows:
• Press MENU, go back to the initial setting
）
• Press UP / DOWN until Addr
• Press ENTER to choose, the display will glinting at this moment
• Press UP / DOWN to change the address code to select A001
•
Press ENTER to select and store the current menu options. DMX mode
•
will be
stored
automatically and the screen will stop glinting.
• DMX channel choosing Operation：CHNd mode
• Press Menu, go back to the initial setting
• Press UP/DOWN，until shows “CHNd”
• Press ENTER to access the menu items to select, the screen will now be
glinting
• Press UP/DOWN to change the DMX Channel: 4CH、 5CH、9CH
• At last, press ENTER to confirm, if
it delay for 3 second
, DMX channel
choosing will be saved, and go back to DMX receive mode(A001); If your
press ENTER
for short time or not press, delaying for
8
seconds
, the DMX
channel will select to be saved automatically, and then go back to DMX
receive mode(A001)
3. Details of program built inside（Pr- -）
• Press MENU, go back to the initial setting
• Press UP / DOWN until Pr--
• Press ENTER to choose, the display will glinting at this moment
• Press UP / DOWN to change the address code to select pr00
•
Press ENTER to select and store the current menu options. DMX mode
•
will be
stored
automatically and the screen will stop glinting.
Note： Pr32--- Pr35 Can change the content Of SP，correct the speed of
jumping change , SP00 is the fastest，SP15 is the slowest
• Pr00--- Pr31: R,G,B,A,W single color or multi-colors lighting
• Pr32：5 colors jumping
• Pr33：5 colors jumping+strob
• Pr32：muilt colors jumping
• Pr33：muilt colors jumping+strob
Operating Control Instruction
Master/Slave
Master：The master should set as built-in program and shows” P - X – X” send out
synchronization signals. To avoid the host signal and DMX512 signals interfere
with each other, should cut off the DMX512 signals. The signal lines are longer
than 60 meters should increase a signal amplifier.
Slave：It must be in the SLAV mode and the address code should be A001 to assure
receive the master’s signals correctly. Only one light can be set as a Master and
others are slaves.
XLR cable connecting
XRL cable：：：：
The stand connection way of the XRL is: one end connects to the male plug, and
the other connects to the female.
Noted：In order to avoid failures and interference signal transmission，we connect
a resistance120Ω（1/4W） at the end of the DMX connecting as below:
The Conversion between 3pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to
3PIN cable
Connecting picture
Cable connecting picture：
Electrical wiring diagram
Exploded views
Luminance list
Problem Analyze
Problem Checking way
Can not turn on the
light
DMX can not control
it
Display not bright
Check the power source plug is in normal or not
Check the switch of the lights is off or on
Check it the fuse if in normal
Check the DMX cable is connect to the lights or not
Check the DMX512 controller work in normal or not
Check the DMX cable is normal or not
Check if the lights is in DMX mode（ A001）
When connect to the electricity，did the led flash one time?
If so，the power source is normal; If not，please check if the
switch and the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
LED not light
Change the main board to see if it is normal.
Chang the display
When connect to the electricity，did the led flash one time?
If so，the power source is normal; If not，please check if the
switch and the transformer has power out
Check if the power input of the IC board is normal
Check if the cable connect to the display loose
Change the main board to see if it is normal.
Chang the display
LED is connect by leds in series first, then connect parallel,
so please check if the leds is loose
Some of the LED not
light
Use the multimeter to check if the led is bright or not, of
not, please change the led
check whether current limiting resistor is normal or not
Check constant current IC is normal or not (compared with
the normal IC)
Single color leds
always bright/not
Check the switch of this color is normal or not
Change the IC control board
bright
Noted: only professional persons can do as above！
Technical Specification
• Input voltage：AC 100V-264V/47-63HZ
• Output voltage：DC24V
• Consume：60W （36*3W：120W）
• Lamp Type：High Power LED(1W/3W)
• Lamp Spec：R(6PCS)， G(8PCS)， B(8PCS)，A(6PCS)，W（8PCS）
• Control Signal：DMX512, sound activated, auto run
• Control mode：stand alone/ sound activated
• Channel：4,5,9CH
• Color effect：RGBAW mixing
• Function Effect
• Beam Angle: 15°, 25°,45°
• Cooling mode: Fun
• Anti-electricity intension：1.5KV
• Insulation Resistance
• Size:300*220*230mm
• Net Weight：2.5KG
：：：：
dimmer, strobe, eotic, gradual change
：＞２
MΩ
Copyright 2012 KANDOLITE. All rights
reserved. Due to continuous improvements
and innovations, specifications may change
without notice.
Loading...