Kandao lightforge KDQC Users manual
User Guide 使用说明书 取扱説明書
. .
Parts Description
EN
Protective
cover
Lens
Wifi LED
Power LED
Power Button
Shutter Button
Microphone
Speaker
Micro SD
Card Slot
360
3D
Standard 1/4 screw
Micro USB
Interface
First Use
Before using the
1
product, remove the
lens protective cover,
which can be used as a
camera holder. When
you finish shooting, put
the lens protective cover
back to the camera.
Take out the
protective cover
2
Rotate the upper
part of camera to
switch for different
mode.
Mode 1: 2D VR 360°
180° rotation
Mode 2: 3D VR 180°
EN
360
3D
Use the camera alone
3
Press the power button for
2 seconds to power on
EN
ON OFFVideo
Press the shutter button for 2
seconds to start recording;
Press the shutter button again to
stop recording
Press the shutter button to take a photo
photo
Press the power button for
2 seconds to power off
Connect the camera to the mobile APP
4
(1)
Press the power button for 2 seconds
to power on
(2)
Press the power button again to
open WiFi function
(3)
Open the mobile APP and connect
the camera
(4)
On the shooting page, you can
choose to take a photo or video.
Tap the capture button to take a
photo or video.
Search QooCam on App Store, Google Play or
Apple Store to download and install the APP.
PHOTO
VIDEO
Click the album to view the pictures
5
/videos taken
APP Album
Click the “Share” button to share the
6
pictures/videos to the social platform
share
Saved in Edited Album Successfully
share to
Facebook Instargam Messenger Whatsapp
Youtube Wechat Weibo QQ
Go To Album
EN
Content Storage
1.Insert the memory card into the camera and the pictures/videos taken
will be stored in the memory card.
2.This product supports UHS-I and exFAT (FAT64) Micro SD cards of up to
256GB.
3.For long video recording, the video will be divided into 8-minute clips
for storage.
24min
8min 8min
8min
Packing List
QooCam
360 & 3D Camera
Protective cover Velvet bag
User Guide
EN
Warranty
Card
USB A Male to
Micro USB
Cable
Statement
1. Please read these instructions;
2. Please pay attention to all warnings;
3. Please follow all instructions;
4. Never operate the device near heat sources such as radiators, heaters, stoves, or other heat generating equipment;
5. Only use accessories and parts specified and provided by the manufacturer for QOOCAM;
6. All maintenance should be conducted by the qualified personnel. Repairs are required in case of any types of damage to the device, for example, power
cord or plug damage, liquid or object falling into the device, or getting wet in the rain or dampness, or failure to work or falling.
Camera Security
Warning: If you fail to take the following precautions, you may be seriously injured or killed by the electric shock or fire disaster, or your QOOCAM may
be damaged:
Please check before using the camera and accessories to make sure they are intact. For security, only QOOCAM accessories that are provided with the
device or genuine ones purchased can be used. Using any other parts, accessories, or chargers not recommended by Kandao may result in fire, electric
shock, or causalities. Damage caused by the use of unauthorized accessories or parts is not covered by the warranty. To learn about approved
accessories, please visit the Kandao website:
www.kandaovr.com
1. Never touch the plug or charger with wet hands while the camera is being charged. If you do not follow this warning message, electric shock may occur.
2. Do not place or fix this product onto an unstable surface. Failure to observe this precaution can result in the product loosening or falling off, thus causing
an accident or damaging the camera.
3. If you use an external power connection, please follow all safety guidelines for third-party powered devices.
4. The QOOCAM camera lens is made of glass. If the lens is damaged, please be careful to avoid scratching by broken glass. Keep it away from children.
5. The temperature of the camera may raise during operation, which is a normal phenomenon during use. In this case, turn off the camera, stop using it,
and try it again later.
6. This product is not a toy and you are solely responsible for complying with all local laws, regulations and restrictions.
7. Do not use QooCam for unauthorized monitoring, secret photography, or in any other way that violates personal privacy laws. Under normal
circumstances, it is strictly forbidden to use the camera for such purposes; otherwise the operator may have to assume major responsibilities and suffer
from criminal lawsuits.
8. Cautions: Do not place the camera in extremely cold or extremely hot environments. Extremely cold or extremely hot conditions may shorten the battery
life or cause the camera to temporarily malfunction.
9. Warning: There is no protection for the 3 lenses of QooCam, which may be easily scratched. It is recommended to always store the QooCam in the
attached lens protective cover and avoid placing the lens on any surface. The lens scratch is not covered by the warranty.
This symbol indicates that your product should be handled separately from household waste according to local laws and regulations. When the
product life ends, please take it to the collection site designated by the local authority. The separate collection and recycling of discarded products
are helpful to the protection of natural resources. Besides, please make sure that they are recycled in ways that are beneficial to the human health
and environmental protection.
Kandao. Inc. hereby declares that QooCam of wireless device type complies with Directive 2014/53/EU.
Product Name: QooCam 360&3D Camera, Product Model: QCM0106
Software Version:HW_2-SW_VER_31-ISP_0509H, HW Version:KIB_3_S317_MB_V2.0
QooCam transmits data in the frequency band 2.412-2.472GHz, or 5.15-5.25GHz . Particular laws and regulations of some countries may prohibit
or restrict the use of partial or all frequency bands listed above. The maximum output power is 16 dBm.
Hereby, Kandao lightforge Co.,Ltd. declares that the radio equipment type QCM0106 is in compliance with Directive 2014/53/EU.The full text of the
EU declaration of conformity is available at the following internet address: https://www.kandaovr.com/en/qoocam/ce-marking.
Importers: Italy ADCOM s.r.l. Kandao VR camera reselling and after-sale service center in Italy. via Zanardi, 50 - 40131 Bologna
+39 051 36 99 40 www.adcom.it info@adcom.it
FCC ID : 2AMZV-KDQC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation.
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
If this
user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission
(USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard
during product certification for use when properly worn on the body(the test distance of SAR is 0mm)
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EN
Loading...