Manual
Quality made in Germany
Kammer Electronic Design UG (haftungsbeschränkt)
Kandelstr. 6, 79183 Waldkirch
Handelsregister: Freiburg i. Br. HRB 709873
Manual V1.00
The device Tiny K fulfills all relevant EG directives. Declaration of conformity
can be obtained from the manufacturer.
Kammer Electronic Design UG reserves the right to change the provided documentation without prior notification.
www.kammerelectronic.de
- 1 -
Attention! Important Advice
• Read this manual before using the device.
• The device may only be repaired by qualified personel. No user serviceable parts inside of the
main device nor the power adaptor.
• Use high quality power supply cables with faultless isolation only!
• The device must not be exposed to dust, moisture, water, direct sunlight or other sources of
heat. The device may not be operated if covered with dew.
• The output may only be connected to a cabinet! If the output is connected to a device
(e.g. guitar amp, audio interface or mixer), the device might be permanently damaged.
• Only use the device with the provided power supply. If another power supply is used,
safe operation cannot be warranted. Additionally unwanted noise might occur.
Introduction
The Tiny K is a full-blown two-channel guitar amp. With its powerful 40W poweramp it masters
every situation - regardless whether you are in the studio, in a live situation or rehearsing.
The preamp is 100% analog and provides a broad spectrum of excellent tube-like sounds from
clean to high-gain.
All these features are available in an ultra-compact pedal format! Do you want to carry your amp
in a backpack or in a guitar case to the gig? No problem! And if there is no cabinet available, you
can plug the send signal directly into the mixing console.
High quality components and intelligent design are making the Tiny K a long-lasting investment,
which will bring you a lot of enjoyment!
Kammer amps stand for inspiration and quality - made in Germany.
Loading...