4
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
Electric Blanket Type: WB1, WB2, WB3 and WB4
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
Snugasabug® Tie-Down Electric Blanket
• Carefully read all instructions before operating
the Kambrook Snugasabug
®
Tie-Down Electric
Blanket and save for future reference.
• Remove any packaging material and
promotional stickers before using the
Kambrook Electric Blanket for the first time.
• Use the Electric Blanket only with the
detachable controller KB31 provided. Refer to
the markings on the heating unit for the model
number of the controller.
• Use this blanket as an under blanket only.
• Not recommended for futons or similar folding
bedding systems.
• This blanket is not recommended to be
used on an adjustable bed. If used on an
adjustable bed, check that the blanket or
cord cannot become caught, creased, kinked
or damaged in any way.
• Make sure that the heating area (wire
element) on any side of the bed does not
hang over the edge of the mattress and that
the following instructions are read carefully
before using the blanket.
• Do not use this blanket with an infant, an infirm
person or anyone insensitive to heat.
• Use only for human use, not for pets.
• Overly extended application at a high setting
can result in skin irritation or burns.
• Avoid sharp objects. Do not insert pins or any
sharp objects into the electric blanket as they
may damage the electrical wiring.
• Do not use pins – they may damage the
electric wiring.
• Do not use folded, rucked or rolled.
• Do not tuck in.
• Do not use creased, folded or damaged in
any way.
• Keep control unit away from an open window.
• Be sure that this blanket is used only on an
alternating current supply circuit of correct
voltage.
• The flexible power supply cord and controller
must, as far as practicable, be kept outside
the bed.
• Be sure that the electric blanket is installed
so that at all times the flexible supply plug is
adjacent and accessible to the main power
outlet.
• Do not use the electric blanket if it is wet
• Switch off at the power outlet and remove
plug when this blanket is not in actual use.
• This blanket must be kept in the fully spread
condition at all times during use to avoid
overheating. It is imperative that the blanket
be frequently inspected to ensure that this
condition is being maintained.
• Regularly inspect the electric blanket, power
supply cord, plug and controller for any
wear, damage or misuse. If signs of these
are detected, immediately cease use of the
appliance and return the entire unit to your
nearest Kambrook Service for examination,
replacement or repair.
• Bed clothes should not be folded back when
the blanket is switched on. Do not leave
heavy objects on the bed when the unit is
switched on.
KEB332_IB_C12.indd 4 10/12/12 3:34 PM