Kambrook KIS20 User Manual

Frost Factory

KIS20 Issue 1/05

Kambrook Safety

Welcome to Kambrook and your new Frost Factory.At Kambrook we believe that the safe performance is the first priority in any consumer product so that you, our valued customer, can confidently use and trust our appliances.We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions:

IMPORTANT SAFEGUARDS FOR YOUR KAMBROOK FROST FACTORY

Carefully read all instructions before operating the appliance and save for future reference.

Remove any packaging material and promotional stickers before using the appliance for the first time.

Do not place the appliance near the edge of a bench or table during operation. Ensure the surface is level, clean and free of water, etc.

Do not place this appliance on or near a hot gas or electric burner, or where it could touch a heated oven.

Handle the Ice chamber with care – remember the blade assembly is very sharp and should be kept out of reach of children.

Do not operate the appliance with a heavy load.

Do not run the motor without ice in the ice chamber.

Always ensure the Frost Factory is switched off at the power outlet and the cord is unplugged from the power outlet. Particularly when not in use, if left unattended and when cleaning or storing.

Do not use the Frost Factory on metal surfaces, for example, a sink drain board.

Do not use ice cubes made from ice cube trays, automatic ice makers, bagged ice etc. Only use the ice made from the freezer containers supplied with this appliance.

Do not continuously run the motor for more than 6 minutes at a time and rest the appliance for 20 minutes before the next operation.

To protect against electric shock do not immerse the power cord, plug or motor housing in water or any other liquid.

Do not move the Frost Factory whilst in operation.

Keep the appliance clean. Follow the cleaning instructions provided in this book.

Do not use attachments other than those provided with the Frost Factory.

Do not attempt to operate the Frost Factory by any method other than those described in this booklet.

IMPORTANT SAFEGUARDS FOR ALL ELECTRICAL APPLIANCES

Unwind the cord before use. Do not let the cord hand over the edge of

a table or counter, touch hot surfaces or become knotted.

This appliance is not intended for use by young children or infirm persons unless they have been adequately supervised by a responsible person to ensure that they can use the appliance safely.Young children should be supervised to ensure that they do not play with the appliance.

It is recommended to regularly inspect the appliance. Do not use the appliance if power supply cord, plug or appliance becomes damaged in any way. Return the entire appliance to the nearest authorised Kambrook Service Centre for examination and/or repair.

Any maintenance other than cleaning should be performed at an authorised Kambrook Service Centre.

This appliance is for household use only. Do not use this appliance for anything other than its intended use. Do not use in moving vehicles or boats. Do not use outdoors.

The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceeding 30mA be installed in the electrical circuit supplying the appliance. See your electrician for professional advice.

KNOW YOUR KAMBROOK FROST FACTORY

1. Motor body

2. Ice chamber with sha

3. Base

ving blade

4. Freezer containers x 4 Push button to sha

e ice

+ 8 hidden pages