Kambrook KFP95 User Manual
850W
Food Processor
KFP95
Instruction Booklet
Important
Please retain your instruction
book for future use.
In the event that you need some assistance with your
Kambrook appliance, please contact our Customer Service
Department on 1300 139 798 (Australia) or 09 271 3980 (New
Zealand). Alternatively, visit us on our website at
www.kambrook.com.au
Contents
Kambrook Recommends p4
Safety First
Using Your Kambrook p7
850W Food Processor
Your 850W Food Processor p8
Assembly and Operation p10
of Your 850W Food Processor
Maintaining and Cleaning p13
Your Kambrook 850W
Food Processor
Blade Operating Guide p14
Recipes p20
Kambrook Recommends Safety First
IMPORTANT: Please retain your
instruction book for future use.
At Kambrook, we believe that safe performance is the first priority in any
consumer product, so that you, our valued customer can confidently
use and trust our products. We ask that any electrical appliance that
you use be operated in a sensible fashion with due care and attention
placed on the following important operating instructions.
Important Safeguards For Your Kambrook
850W Food Processor
•Carefully read all instructions
before operating the Kambrook
850W Food Processor for the first
time and save for future reference.
•Remove and safely discard
any packaging material and
promotional labels before using the
food processor for the first time.
•To eliminate a choking hazard for
young children, remove and safely
discard the protective cover fitted
to the power plug of this appliance.
•Do not place the food processor
near the edge of a bench or
table during operation. Ensure the
surface is level, clean and free of
water and other substances.
•Do not use the food processor on a
sink drain board.
•Do not place the food processor
on or near a hot gas or electric
burner, or where it could touch a
heated oven.
•Handle the food processor and
attachments with care – remember
the blades and discs are razorsharp and should be kept out of
the reach of children.
•Use the blade protector when
storing the processing blade.
•Always ensure the food processor
is completely assembled before
operating. The appliance will not
operate unless properly assembled.
•Ensure the Speed Selection dial is
in the ‘OFF’ position and the food
processor is switched off at the
power outlet and the power cord
is unplugged before attaching
the processing blade, discs or
processing lid.
•Always secure the processing
bowl onto the motor base before
attaching the processing blade
or discs.
•Ensure the processor lid is securely
locked in place before operating.
•Do not remove the processing
bowl from the motor base whilst
in operation.
•Do not push food into the food
chute with your fingers or other
utensils. Always use the food
pusher provided.
4
•Keep fingers, hands, knives and
other utensils away from moving
blades and discs.
•Do not place hands or fingers
into the processing bowl of the
food processor unless the motor,
processing blade and discs have
come to a complete stop. Ensure
the Speed Selection dial is in the
‘OFF’ position and the appliance
is switched off at the power outlet
and the power cord is unplugged
before removing the lid from the
food processor bowl.
•Ensure the motor and blades or
discs have completely stopped
before disassembling. Ensure the
Speed Selection Dial is in the ‘OFF’
position and the appliance is
switched off at the power outlet
and the power cord is unplugged
from the power outlet before
attempting to move the appliance,
when not in use, if left unattended
and before disassembling,
cleaning or storing.
•Do not use attachments other
than those provided with the
food processor.
•Do not attempt to operate the
food processor by any method
other than those described in
this booklet.
•Care should be taken when
removing the food from the
processing bowl by ensuring
the motor and the processing
blade or disc, have completely
stopped before disassembling.
Ensure the Speed Selector Dial is
turned to the ‘OFF’ position, the
appliance is switched off at the
power outlet and unplugged,
before removing the lid from the
bowl. The processing bowl should
then be unlocked from the motor
body and the processing blade
or disc holder carefully removed
before attempting to remove the
processed food.
•Do not blend a dry, thick or heavy
mixture for more than 60 seconds
without turning the food processor
off and stirring the ingredients
before continuing to blend.
•If the food processor is operated
continuously for too long, it should
be allowed to rest for 25-30 minutes
before recommencing.
•Do not process hot or boiling
liquids – allow liquids to cool before
placing into the processing bowl.
•Do not move the food processor
whilst in operation.
•Do not leave the food processor
unattended when in use.
•Do not place any part of the food
processor in the dishwasher or
microwave oven.
•Do not process thin fluids such as
water, milk, stock, juice, etc., above
500ml level in the processing bowl
as this could result in overflow. To
reduce the risk of overflow, always
add drier or thicker ingredients
to the processing bowl prior to
adding fluids.
•Do not place anything on top of
the food processor when the lid is
on, when in use and when stored.
•Keep the food processor clean.
Follow the Maintaining Your Food
Processor instructions provided in
this book.
5
Important Safeguards For All
Electrical Appliances
•Fully unwind the power cord
before use.
•Do not let the power cord hang
over the edge of a bench or
table, touch hot surfaces or
become knotted.
•To protect against electric shock
do not immerse the power cord,
power plug or motor base in water
or any other liquid.
•This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.
•Children should be supervised to
ensure that they do not play with
the appliance.
•It is recommended to regularly
inspect the appliance. Do not
use the appliance if power cord,
power plug or appliance becomes
damaged in any way. Return the
entire appliance to the nearest
authorised Kambrook Service
Centre for examination
and/or repair.
•Any maintenance other than
cleaning should be performed
at an authorised Kambrook
Service Centre.
•This appliance is for household use
only. Do not use this appliance for
anything other than its intended use.
Do not use in moving vehicles or
boats. Do not use outdoors. Misuse
may cause injury.
•The installation of a residual
current device (safety switch)
is recommended to provide
additional safety protection when
using electrical appliances. It is
advisable that a safety switch with
a rated residual operating current
not exceeding 30mA be installed in
the electrical circuit supplying the
appliance. See your electrician for
professional advice.
6
Using Your Kambrook 850W Food Processor
Before First Use
Before first use remove and safely
discard any promotional labels and
wash the food processor bowl
and all blades in warm, soapy water.
Dry thoroughly.
CAUTION: Blades must
be handled carefully as
they are sharp!
Place the motor base on a level,
flat surface.
7
Your 850W Food Processor
8
1. Speed Selection Dial – a
choice of 3 speeds plus pulse
for complete processing/
blending control
2. Motor base - 850 watts of
processing power
3. Processor bowl - extra large 1.5
litre capacity for grating/slicing
vegetables, processing foods,
mixing doughs etc.
4. Processor drive shaft
5. Food pusher with removable
inner 80ml Measuring Cup – fits
into the food chute for safe
adding of foods onto the blades
and prevents splashing when
using the processing blade
6. Processing lid and feed chute
– (Processor lid must be fitted
correctly or the processor will
NOT operate)
7. Disc holder – processing discs
simply lock into place
8. Stainless steel fine grating disc –
for grating chocolate and hard
cheeses such as Parmesan
9. Stainless steel chipping disc – for
french fries. Also handy for stir
fried vegetables
10. Stainless steel thick slicing disc –
for slicing vegetables, chicken,
meat and salami
11. Stainless steel coarse grating disc
– for grating firm cheeses, fruit
and vegetables
12. Stainless steel thin slicing disc –
for slicing vegetables and fruits
13. Stainless steel fine grating disc –
for grating chocolate and hard
cheeses such as Parmesan
14. Processing blade protective
cover – for storage when blade is
not in use.
15. Non-skid suction feet –
for stability
16. Spatula
17. Stainless steel processing blade –
use for all chopping, mixing and
processing tasks
18. Mixing blade – use for making
dough for pastry or bread
19. Unique storage holder –
conveniently and safely stores
attachments on top of lid
Not Shown
• Automatic safety cut out
– prevents the 850W Food
Processor from operating unless
the processor bowl and lid, are
correctly engaged on the
motor base
• Cord storage
CAUTION: Blades must
be handled carefully as
they are sharp!
9
Assembly and Operation of Your
850W Food Processor
Your 850W Food Processor features 2
safety locking devices.
NOTE: The food processor will
not work unless all of the below
are in place:
1. The processor bowl is correctly
LOCKED into position.
2. The processor lid is correctly LOCKED
into position.
NOTE: Always ensure that the
Food Processor is disconnected
from the power outlet and the
Speed selection Dial is turned
to the ‘OFF’ position before
assembling or disassembling
the Food Processor.
Correct Placement of the
Processor Bowl
Place the empty bowl onto the base,
with the handle on your right align the
arrow
with the align arrow
motor base. Turn the bowl clockwise
until the arrow on the processor
bowl handle is aligned with the ‘lock’
indicator arrow
on the processor bowl handle
on the motor base.
on the
Fig. 2
WARNING: All blades
must be handled
carefully as they are
sharp!
Using the Processing/
Mixing Blade
a. Select either the processing or
plastic mixing blade.
b. Place the processing/mixing blade
over the drive shaft and push down.
Fig. 3
10
Fig. 1
Loading...